Process Reuse
Mostrando 1-12 de 192 artigos, teses e dissertações.
-
1. Obtainment of a new metal matrix composite from the recycling of UNS S31803 duplex stainless steel by powder metallurgy
Abstract The purpose of circular economy is to maximize resources efficiency. With the increase in consumption of raw materials, energy and waste generation, recycling is necessary for environmental and industrial reasons. Thus, the powder metallurgy, together with mechanical milling, stands as a new method for scraps recycling. This study aimed to produce U
REM - International Engineering Journal. Publicado em: 2022
-
2. Zeólita NaA sintetizada sobre fibra de vidro como estratégia para otimização do abrandamento de águas duras
NaA ZEOLITE SYNTHESIZED OVER FIBERGLASS AS A STRATEGY FOR OPTIMIZING HARD WATER SOFTENING. Zeolite NaA has been successfully synthesized over glass fiber surface previously activated by alkaline treatment. By varying the time of the treatment and the amount of silica and alumina precursors used in the reaction mixture, a sample with higher zeolite concentrat
Química Nova. Publicado em: 2022
-
3. Application of Nickel Ferrite Nanoparticles in Adsorption of Amoxicillin Antibiotic
According to the World Health Organization, amoxicillin (AMX) is the most widely consumed antibiotic in the world. Consequently, there is great interest in the development of new technologies that allow the removal of this type of contaminant, as exposure to antibiotic residues can cause a variety of adverse effects, such as toxicity and antimicrobial resist
J. Braz. Chem. Soc.. Publicado em: 2020-12
-
4. Imidazolium-based Ionic Liquids Impregnated in Silica and Alumina Supports for CO2 Capture
Ionic liquids (ILs) physical immobilization in solid materials is a key strategy for developing efficient and low cost CO2 capture processes. In this work, two porous commercial substrates with different characteristics (silica and alumina) were impregnated with ILs by physical wet method. Imidazolium based IL combined with [Br]- and [Tf2N]- anions were used
Mat. Res.. Publicado em: 11/11/2019
-
5. THERMAL BEHAVIOR OF FOREST BIOMASS WASTES PRODUCED DURING COMBUSTION IN A BOILER SYSTEM
RESUMO Durante a queima da biomassa em sistemas industriais haverá a formação de resíduos contendo cinzas e carbono residual, cujo teor será variável em função da eficiência e dos parâmetros de operação das câmaras de combustão. A caracterização destes resíduos é ferramenta essencial para visualizar a sua potencialidade de reuso energético
Rev. Árvore. Publicado em: 23/09/2019
-
6. Evaluation of Solid Waste From H2S Removal Process in Natural Gas Treatment Incorporated Into Red Ceramic
Waste incorporation into clay ceramic is a worldwide accepted recycling procedure for environmentally friendly reuse of spent industrial materials. In the present work a clay ceramic from the city of Campos dos Goytacazes, Brazil, was, for the first time, investigated with different amounts, up to 10 wt%, of a solid waste generated from the “Sulfatreat”
Mat. Res.. Publicado em: 12/08/2019
-
7. Avaliação do ciclo de vida do Sistema Municipal de Gerenciamento de Resíduos da Construção Civil da Região Metropolitana de Campinas
RESUMO A ausência ou ineficiência de Sistemas Municipais de Gerenciamento de Resíduos da Construção Civil (SMGRCCs) pode ocasionar impactos ambientais, os quais precisam ser avaliados sistematicamente, levando em consideração a realidade local. Existem poucos estudos sobre a quantificação dos impactos ambientais relacionados ao gerenciamento de res�
Eng. Sanit. Ambient.. Publicado em: 21/03/2019
-
8. Adaptation of domestic effluent for agricultural reuse by biological, physical treatment and disinfection by ultraviolet radiation
Resumo O reúso de efluente doméstico é uma alternativa para a agricultura irrigada em situações de reduzida disponibilidade de água. No entanto, como é comum a presença de patógenos em águas residuárias, torna-se necessário um processo de desinfecção previamente à sua utilização. Com o desenvolvimento da pesquisa, avaliou-se a viabilidade sa
Rev. Ambient. Água. Publicado em: 11/03/2019
-
9. Caracterização da cinza de caroço de açaí residual para adição ao concreto
Resumo Os problemas ambientais são uma realidade do mundo atual e vêm associados ao crescimento urbano e populacional, com pouco ou nenhum planejamento. O setor da construção civil é um dos maiores consumidores de recursos naturais e gerador de resíduos sólidos. Assim, é interessante pensar em uma maneira de incorporar materiais que hoje são conside
Ambient. constr.. Publicado em: 2019-03
-
10. Wastewater treatment using adsorption process in column for agricultural purposes
Resumo A água é um recurso essencial para vida, de extrema relevância para o ecossistema e encontra-se com várias problemáticas, entre elas a escassez. Por conta disso, o presente estudo foi desenvolvido a fim de propiciar a reutilização da água residuária da Estação de Tratamento de Água de Gramame para fins agrícolas. Assim, foi realizada a in
Rev. Ambient. Água. Publicado em: 04/02/2019
-
11. Life Cycle Assessment (LCA) and Wind Power Generation: Application of the Methodology and the Generator to Power System
ABSTRACT Sustainability and economics are current issues in the generation of electricity. The energy matrix is diversified and some forms have stood out, such as wind. Some tools have been developed to improve project efficiency, one of which is Life Cycle Assessment (LCA). This presents solidity when assisting projects financially and environmentally, eval
Braz. arch. biol. technol.. Publicado em: 29/10/2018
-
12. Physico-chemical characterization of centrifuged sludge from the Tamanduá water treatment plant (Foz do Iguaçu, PR)
ABSTRACT The water treatment process generates a residue called water treatment plant (WTP) sludge, which needs to be correctly characterized to ensure appropriate disposal or reuse. This study aimed to characterize the centrifuged sludge produced at the Tamanduá WTP, Iguaçu Falls City, Brazil, and considered opportunities for its reuse in the production o
Matéria (Rio J.). Publicado em: 18/10/2018