Power Measurement
Mostrando 1-12 de 170 artigos, teses e dissertações.
-
1. Equipment for Monitoring Synchronous Generators Condition through External Magnetic Field Waveforms
Abstract This paper presents an equipment for monitoring synchronous generators condition through characteristics of the time derivative of the external magnetic field. The developed monitoring methodology allows the identification of established or incipient faults, by detecting changes in the magnetic signature of the synchronous generator. In this methodo
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Estimation and Mapping of the Received Power Level of Digital Signals TV Using Spatial Interpolation Methods
Abstract The signal digitization process of the open television system is still in progress, therefore, the study of the digital signal propagation has great importance so that broadcasters can develop and improve the transmission service. The field measurement of digital signal parameters is one of the most reliable means to analyze the signal propagation i
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. MIMO-PLC Communications in an Experimental Medium Voltage Network: Measurement and Analysis
Abstract This paper presents measurements at a mock-up medium voltage network to verify the feasibility of Broadband Power Line Communication (BPLC). We use the data extracted within the frequency range 2 − 30 MHz to characterize a MIMO PLC network using different phase combinations, defining the best and worst use case scenarios. The empirical data shows
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
4. Impact of Continuing Education on the Quality of Blood Pressure Measurement
The properties of lanthanides allow them to be used as contrast agents for magnetic resonance imaging, thereby helping to differentiate between tissues, organs, and pathologies more efficiently. Lanthanides contain thermosensitive energy levels that aid identification of cancer and healthy cells. This work investigates the GdVO4 matrix obtained by the non-hy
Int. J. Cardiovasc. Sci.. Publicado em: 2021-02
-
5. The effect of extraction method and types of coagulants on the results and physicochemical properties of tofu
Abstract Extraction and coagulation techniques are essential stages in tofu production. This research studies the effect of extraction and coagulation techniques on physicochemical properties of soybean extract, soy pulp, and tofu. This study applies three extraction techniques, namely manual heat extraction, manual cold extraction, and cold extraction using
Food Sci. Technol. Publicado em: 2020-12
-
6. A Novel Fully Integrated 4-Bit IFM Subsystem Using Band-Stop Filters
Abstract In this paper a 2-4 GHz microstrip IFM (Instantaneous Frequency Measurement) subsystem that uses Wilkinson power dividers, frequency discriminators based on band-stop filters and a DC arduino section is reported. The device uses band-stop filters as an alternative to delay lines, commonly used for IFM. The resonators are responsible for frequency ad
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-09
-
7. Modified Ring Power Divider Using Stepped-Impedance Resonator
Abstract In this paper, the design of a modified ring power divider dedicated for wideband communication or measurement systems is presented. The proposed power divider is built by using a conventional ring power divider and an additional Stepped-Impedance Resonator (SIR). The even-odd mode analysis is used to derive the design equations. In order to observe
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-03
-
8. Aço carbono 1040 como indicador de agressividade do solo e da pasta de cimento em sistemas de ancoragem de linhas de transmissão
RESUMO O encapsulamento de hastes de âncora em pasta de cimento reduz o contato dos materiais metálicos com os ambientes agressivos, em torres estaiadas de linhas de transmissão de energia elétrica. Contudo, ainda são reportados casos de falha prematura devido à corrosão do sistema de ancoragem. O íon cloreto é considerado um dos principais respons�
Matéria (Rio J.). Publicado em: 16/09/2019
-
9. Accuracy of Irradiance and Power of Light-Curing Units Measured With Handheld or Laboratory Grade Radiometers
Resumo Esse estudo mensurou e comparou a irradiância e a energia de quatro fotopolimerizadores comerciais (Elipar S10, Elipar DeepCure-S, Corded VALO e Bluephase Style) utilizando diferentes tipos de radiômetros. Os dispositivos utilizados para analisar os fotopolimerizadores foram classificados em portáteis analógicos (Henry Schein, Spring, Demetron 100
Braz. Dent. J.. Publicado em: 22/07/2019
-
10. Test-Retest Reliability of Non-Invasive Cardiac Output Measurement during Exercise in Healthy Volunteers in Daily Clinical Routine
Resumo Fundamento: A biorreatância torácica (BT), um método não invasivo destinado à medição do débito cardíaco (DC), mostra boa confiabilidade teste-reteste em adultos saudáveis examinados em condições de pesquisa e repouso. Objetivo: No presente estudo, avaliamos a confiabilidade teste-reteste da avaliação do DC e trabalho cardíaco (TC)
Arq. Bras. Cardiol.. Publicado em: 10/07/2019
-
11. Waist circumference as high blood pressure predictor in school age children
Resumo A hipertensão na infância está aumentando com a epidemia de obesidade infantil, o que tem incentivado estudos para identificar um bom marcador antropométrico dos níveis pressóricos aumentados. O objetivo do presente estudo foi identificar o melhor preditor antropométrico de risco de hipertensão arterial em crianças entre 8 e 10 anos de idade.
Ciênc. saúde coletiva. Publicado em: 30/05/2019
-
12. A MEASUREMENT SYSTEM BASED ON LiDAR TECHNOLOGY TO CHARACTERIZE THE CANOPY OF SUGARCANE PLANTS
ABSTRACT Laser sensor applications associated with LiDAR (Light Detection and Ranging) technology on platforms allow the evaluation of crop and forest biomass in a non-invasive way. This study presents the development of a measurement system based on LiDAR technology aimed at the proposed assessment of the height of sugarcane plants during the pre-harvest pe
Eng. Agríc.. Publicado em: 25/04/2019