Power Converters Control
Mostrando 13-24 de 32 artigos, teses e dissertações.
-
13. MÃtodos de sincronizaÃÃo de conversores em sistemas de geraÃÃo distribuÃda / Converter synchronization methods for distributed generators systems
The use of frequency converters DC/AC to integrate renewable energy as distributed generation is becoming more common. In such applications, the synchronization with the voltage vector is fundamental to control the converters, particularly considering the new requirements on Low Voltage Ride Through demanded from the distributed generation. This work propose
Publicado em: 2008
-
14. Controle automatico eletronico de ganho com supressão de transientes aplicado a EDFAs em redes opticas WDM / Eletronic automatic gain control with transient suppresion applied over WDM optical networks
IIn WDM optical communication systems erbium doped fiber amplifiers (EDFA) have an essential function, enabling amplification of simultaneous channels independently of transmit rate. The majority of current WDM systems use point to point configuration operating with a fixed number of channels over the optical link. However, the new generation optical systems
Publicado em: 2008
-
15. Aplicação do controle baseado em passividade em conversores estáticos operando como préreguladores de fator de potência
This work studies a passivity based control approach applied to a switch-mode converters, specially the non isolated step-down (buck) converter operating in continuous conduction mode. Passivity is funded in energy concepts and consists in adjusting the system stored energy in order to achieve stability. Two different techniques are described: First, the dir
Publicado em: 2008
-
16. INTERACTION BETWEEN LOW-RIPPLE SWITCHED CONVERTERS AND FUEL CEL LS / INTERAÇÃO ENTRE CONVERSORES CHAVEADOS COM BAIXA ONDULAÇÃO E CÉLULAS DE COMBUSTÍVEL
This dissertation discusses the interaction between fuel cells and the DC-DC converter just connected across its terminals. For that, it presents a modified algorithm to represent the dynamic behavior of fuel cell stacks as much the current ripple effects from power converters on such cells. PEM type fuel cells (Proton Exchange Membrane) are studied to get a
Publicado em: 2007
-
17. CONTRIBUTIONS TO STUDY OF WIND FARM CONNECTION TO THE UTILITY / CONTRIBUIÇÕES AO ESTUDO DE CONEXÃO DE GERAÇÃO EÓLICA À REDE ELÉTRICA
Distribution systems have not been designed to receive distributed generation (DG) units. The electric energy injection in these systems is safe and reliable if the characteristics regarding of DG interconnection in distribution power systems are considered: (i) Protection; (ii) Stability; (iii) Electric energy market; (iv) Quality of energy. In this work, a
Publicado em: 2007
-
18. SISTEMA DE ILUMINAÇÃO DISTRIBUÍDA UTILIZANDO LEDs ACIONADOS POR DOIS CONVERSORES FLYBACK INTEGRADOS
This dissertation describes the design and implementation of an emergency lighting system using Light Emitting Diodes (LEDs). The system is composed by two integrated converters working as battery charger and LEDs supplying. Power LEDs were used, due to their high luminous flux and opening angle of 160. System control and management are done through a microc
Publicado em: 2007
-
19. Output voltage and current tracking strategies of a voltage source converter. / Estudo de estratégias de rastreamento da corrente e da tensão de saída CA de um conversor do tipo fonte de tensão.
Este trabalho apresenta algumas estratégias de controle das malhas de rastreamento de tensão e corrente no lado CA de conversores do tipo fonte de tensão com filtro L ou LC. A topologia escolhida para o controle de tensão CA do inversor é a de duas malhas de controle em cascata: malha de tensão e malha de corrente, sendo esta última mais interna no si
Publicado em: 2007
-
20. Sintese de indutancia negativa para aplicação serie em redes de energia eletrica / Negative inductance synthesis for series applications on the electrical network
Nesta tese é introduzida uma nova estratégia de controle que permite a síntese de indutâncias negativas para realização da compensação série de linhas de transmissão. O método, que é baseado na estratégia SDR (Síntese Direta de Reatâncias), opera com realimentação de estados e requer a medição de variáveis locais. Em relação aos método
Publicado em: 2007
-
21. CONTRIBUIÇÃO AO ESTUDO DA MÁQUINA ASSÍNCRONA TRIFÁSICA DUPLAMENTE ALIMENTADA APLICADA A AEROGERADORES DE VELOCIDADE VARIÁVEL
This work presents the analysis and implementation of a vector control applied to Doubly-Fed Induction Generators (DFIG) used in grid connected wind turbines. DFIGs are nowadays the more widely used concept for grid connected wind turbine, especially for rated power above 1 MW. The main reason is the low rotor PWM power converter rating. The present work dea
Publicado em: 2006
-
22. Controle e integração de centrais eólicas à rede elétrica com geradores de indução duplamente alimentados. / Control and integration of wind farms to the power grid using doubly fed induction generators.
This Thesis presents the control and integration of wind farms to the interconnected power grid, using doubly fed induction generators (DFIG). The main objective of the present Thesis was to develop discrete control strategies for the wind generation system, with the goal to reduce the wind variations impacts in the grid power quality. The design technique s
Publicado em: 2006
-
23. Active Power Filters for current harmonics and reactive power compensation / Filtros Ativos de PotÃncia para CompensaÃÃo de HarmÃnicos de Corrente e PotÃncia Reativa
A popularizaÃÃo dos componentes eletrÃnicos e o conseqÃente aparecimento de novas tecnologias impulsionaram o surgimento de problemas na qualidade da energia da rede elÃtrica. O principal objetivo dessa dissertaÃÃo à estudar as propostas de compensaÃÃo das distorÃÃes nas correntes da rede elÃtrica geradas pela presenÃa de cargas que contÃm um
Publicado em: 2006
-
24. Sistema de controle e automação aplicável a secadores em camada fina utilizando-se instrumentos digitais endereçáveis / Automation and control system applicable to thin-layer grain dryer by using digital addressable instruments
Many grain-dryers models with different configurations and applications are encountered worldwide. Among those a thin-layer dryer makes it possible to perform detailed analysis of the drying process. With the results from this analysis results, the drying curves can be modeled and the deep bad grain drying process can be predicted. The thin layer grain dryer
Publicado em: 2006