Porous Ceramic
Mostrando 1-12 de 61 artigos, teses e dissertações.
-
1. The influence of compositional variability of dimension stone residues on the properties of rustic porous ceramic tiles
Abstract This study analyzed how the compositional variability of dimension stone residues influences the characteristics of rustic porous ceramic tiles. The specimens were prepared by adding 20 wt% of dimension stone residue to the clay and sintered at 1000 °C for 1 h. The testing assays performed were physical properties and structural analysis through sc
Cerâmica. Publicado em: 2023
-
2. Bioactive SiO2-K2O-CaO-P2O5 glass-ceramic scaffold prepared using polyurethane foam template
Abstract A glass-ceramic in the SiO2-K2O-CaO-P2O5 quaternary system was prepared by substituting the Na2O component with K2O to avoid Na2Ca2Si3O9 formation upon thermal treatment since this phase decreases apatite formation kinetics on glass material. To form the glass-ceramic, a modified sol-gel method involving solution precipitation, followed by reagents
Cerâmica. Publicado em: 2023
-
3. A review on the production of porous ceramics using organic and inorganic industrial waste
Abstract The use of industrial waste in compositions of ceramic masses has attracted great interest from the scientific community, as they can be considered abundant and diversified alternative sources of raw materials. At the same time, there is a growing interest in the development of porous ceramics due to their wide possibilities for use in various field
Cerâmica. Publicado em: 2022
-
4. Development of a ceramic membrane for emulsion water-diesel treatment
Abstract The purpose of this study was the development of a low-cost ceramic tubular membrane, using inexpensive materials, namely natural clay, and graphite as a porogenic agent. Such a low-cost membrane can be used as filters or porous supports for the preparation of multilayer ceramic membranes. Extrusion was used as a shape-forming method for this purpos
Cerâmica. Publicado em: 2022
-
5. Freeze-casting applied to ceramic materials: a short review of the influence of processing parameters
Abstract In recent years there is a high interest in the freeze-casting process because it is a simple, economical, and environmentally friendly method for obtaining highly porous materials. Most of the materials obtained by this technique have directional pore structure and anisotropic properties. However, a wide range of pore size and morphology can be obt
Cerâmica. Publicado em: 2021-03
-
6. Low-intensity pulsed ultrasound promotes tissue regeneration in rat dental follicle cells in a porous ceramic scaffold
Abstract The aim of this study was to investigate the effects of low-intensity pulsed ultrasound (LIPUS) on the osteogenic differentiation of dental follicle cells (DFCs) in vitro and on the regenerative effects of DFC-OsteoBoneTM complexes in vivo. DFCs were isolated and characterized. In the in vitro study, DFCs were cultured in an osteogenic medium in the
Braz. oral res.. Publicado em: 09/09/2019
-
7. Utilização da termografia infravermelha para detecção de focos de umidade em paredes internas de edificações
Resumo O uso da termografia infravermelha tem se tornado alvo de estudos em várias áreas dentro da construção civil. Contudo, as pesquisas de detecção de presença de umidade em edificações ainda estão em desenvolvimento. O objetivo principal deste artigofoi estudar a viabilidadedo uso da termografia para a detecção de infiltrações devido a caus
Ambient. constr.. Publicado em: 2019-03
-
8. Influence of sintering temperature on the development of alumina membrane shaped by centrifugal casting for gas separation
Abstract The development of ceramic membranes for the most diverse separation processes has gained high visibility, mainly due to their better performance in harsh environments in comparison to polymeric materials. Among the different techniques used to prepare tubular ceramic membranes, the centrifugal casting (CC) is interesting for obtaining highly homoge
Cerâmica. Publicado em: 2019-01
-
9. Watermelon fertigation with electrical conductivity and ph monitoring in the soil solution
ABSTRACT In the olericulture, in general, is practiced intensive fertilization, which creates a risk of salinization and change of high pH, which if not well monitored can cause production losses, excessive spending on fertilizers and environmental contamination. We developed this study with the aim of controlling fertigation on watermelon through the behavi
Eng. Agríc.. Publicado em: 2016-08
-
10. Nano and Micro Ceramic Membranes from Degradable Templates
Abstract The nano/microstructures with highly porous surface area have attracted tremendous attention, particularly the synthesis and tailoring of porous and hollow materials of high performance. In this paper, an easy method of cost-effective synthesis of hollow ceramic fiber membranes based on Hydroxyapatite, TiO2 and ZrO2 stabilized with Yttrium, is propo
Mat. Res.. Publicado em: 28/07/2016
-
11. Production of porous ceramic materialusing different sources of alumina and calcia
ABSTRACTNumerous papers and publications report the use of microporous calcium hexaluminate (CaO.6Al2O3; CA6) as a key raw material for high temperature insulating materials. This material has unique properties with respect to chemical purity and mineral composition. Another important property of CA6 is its structure, which consists of platelet-shaped crysta
Matéria (Rio J.). Publicado em: 2015-09
-
12. Experience on a Low Cost Way to Obtainal-Ti Ceramic Foams
An experience on a simple process for producing alumina-rutile-mullite ceramic foams by using aqueous particulate slurries is proposed. The sintering process is achieved in one unique thermal process at 1200 ºC in air. The description of the process, physical properties and morphological studies are reported. Microstructure is studied by using confocal opti
Mat. Res.. Publicado em: 2015-08