Utilização da termografia infravermelha para detecção de focos de umidade em paredes internas de edificações

AUTOR(ES)
FONTE

Ambient. constr.

DATA DE PUBLICAÇÃO

2019-03

RESUMO

Resumo O uso da termografia infravermelha tem se tornado alvo de estudos em várias áreas dentro da construção civil. Contudo, as pesquisas de detecção de presença de umidade em edificações ainda estão em desenvolvimento. O objetivo principal deste artigofoi estudar a viabilidadedo uso da termografia para a detecção de infiltrações devido a causas fortuitas em paredes internas. A metodologia consistiu na confecção de paredes de alvenaria de tijolos cerâmicos com diversas configurações de revestimento: sem revestimento, com gesso, gesso com tinta base látex, gessocom tinta base acrílica e gesso com cerâmica assentada com gesso cola. Em cada protótipo foi inserida uma tubulação furada a fim de simular vazamento. O avanço da infiltração foi verificado por meio de termogramas, por um período de 2 h com vazão constante, com 48 h e uma semana após o início da simulação. Os resultados encontrados confirmam que a termografia pode ser eficaz na detecção da região que contém o foco da infiltração oculta, desde que o revestimento não seja impermeável. Esse fato pode ser observado por meio dos gradientes térmicos produzidos. Nos revestimentos porosos ∆T variou entre 2,6 ºC e 3,8ºC, e aqueles com características impermeáveis apresentaram ∆T máximo de 2,2ºC, indicando a influência direta do tipo de revestimentono tempo de surgimento da mancha de umidade de forma aparente.Abstract The use of infrared thermography has become the theme of studies in several areas of the construction industry. However, research studies on detecting the presence of moisture in buildings are still under development. The main objective of this article was to study the feasibility of the use of thermography in the detection of infiltrations due to accidental causes in internal walls. The methodology consisted of the construction of masonry walls made of ceramic bricks with different coating configurations: uncoated, with plaster, plaster with latex paint, plaster with acrylic base paint and plaster with ceramic set with plaster glue. In each prototype, a drilled pipe was inserted to simulate water leaks. The infiltration progress was verified by means of thermograms, for a period of 2 hours with constant flow, and at 48 hours and one week after the beginning of the simulation. The results confirm that thermography may be effective in detecting the region containing the focus of hidden infiltration, provided the coating is not impermeable. This fact can be observed in the thermal gradients produced in the porous coatings, where ΔT ranged from 2.6 to 3.8 º C, whereas coatings with waterproof characteristics had a maximum ΔT of 2.2 ºC. In addition, the type of coating directly influences the time required for the appearance of the moisture spot to become apparent.

Documentos Relacionados