Porcelain
Mostrando 1-12 de 151 artigos, teses e dissertações.
-
1. Effect of Gingival Retraction Method to Lateral Gingival Displacement Width
Abstract Objective: To analyze the efficacy of retraction cord with a hemostatic agent in comparison with retraction paste on lateral gingival displacement, to achieve the success of fixed dental prostheses (FDP). Material and Methods: Test samples included 32 teeth that required treatment with metal-porcelain FDP at RSKGM FKG Universitas Indonesia. Impres
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 13/01/2020
-
2. Analysis of enamel and material wear by digital microscope: an in-vitro study
Abstract: The objective of the study was to analyze the surface area (SA) of the wear caused by simulated chewing on human enamel and opposing restorative material, namely: composite resin (CR), porcelain fused to metal (PFM), lithium disilicate (LD), or monolithic zirconia (MZr). Forty-eight premolars were selected as enamel specimens and divided randomly i
Braz. oral res.. Publicado em: 10/01/2020
-
3. Light Activation and Thermocycling Methods on the Shear Bond Strength of Brackets Bonded to Porcelain Surfaces
Resumo No presente estudo foi avaliado o efeito de diferentes métodos de fotoativação e ciclagem térmica na resistência da união ao cisalhamento (RUC) e no índice de remanescente adesivo (IRA) de braquetes metálicos colados à cerâmica feldspática. Cem braquetes metálicos foram colados em 20 cilindros de porcelana, divididos em 4 grupos (n=25) de
Braz. Dent. J.. Publicado em: 2020-01
-
4. Estimating the reduction of the firing temperature produced by the addition of energetic fluxes in porcelain tiles through the Fluegel’s model
Resumo Reduzir a temperatura de queima e acelerar o processo de densificação implicam em benefícios econômicos e ambientais. Este estudo utilizou o modelo de viscosidade de Fluegel, desenvolvido para vidros, para estimar a diminuição da temperatura de queima produzida pela introdução de fundentes enérgicos em porcelanatos. Os resultados experimentai
Cerâmica. Publicado em: 14/11/2019
-
5. Characterization of Brazilian Northeastern plastic clays
Resumo Argilas plásticas são uma das principais matérias-primas usadas em tecnologia cerâmica. No entanto, há uma escassez dessas argilas no mundo para o uso em tecnologia de porcelanas. O objetivo deste trabalho foi caracterizar argilas plásticas do nordeste brasileiro. Composições química e mineralógica, distribuição do tamanho de partículas,
Cerâmica. Publicado em: 14/11/2019
-
6. Influence of activation mode, fatigue, and ceramic interposition on resin cements’ diametral tensile strength
Abstract This study evaluated the influence of activation modes, on Diametral Tensile Strength (DTS) of dual cured resin cements subjected to a Mechanical Fatigue test (MF). Four dual-cured resin cements (RelyX UNICEM [U], RelyX ARC [A], ENFORCE [E] and Nexus 2 [N]) were activated by three different curing modes as follows: Self-Curing (SC), Dual Cure activa
Braz. oral res.. Publicado em: 26/08/2019
-
7. Use of Firewood Ash Waste in Electrical Siliceous Porcelain
The use of firewood ash waste for the production of electric porcelain can represent an important technological and environmental alternative for the final disposal of this abundant solid waste material. This work aims to study the effect of replacing of sodium feldspar (albite) for firewood ash waste in electrical siliceous porcelain formulation. The firewo
Mat. Res.. Publicado em: 05/08/2019
-
8. Fire exposure behavior of epoxy reinforced with jute fiber applied to ceramic tiles for a ventilated facade system
Civil construction seeks to increase the useful life of the facades of buildings. Installing a ventilated facade is one way to accomplish this due to aesthetic and technical advantages. Ceramic tiles are the main products used as the covering. To the back face of a tile, a bidirectional screen of glass fiber is adhered using epoxy resin. This set forms a com
Mat. Res.. Publicado em: 18/07/2019
-
9. Characterization of Algerian kaolins for utilization as a raw material in electrical insulators
Resumo O objetivo desta investigação foi caracterizar três amostras de caulim (DD1, DD2 e DD3) coletadas do depósito de Djebel Debbagh (leste da Argélia) para serem utilizadas em isoladores elétricos de porcelana. Análise granulométrica, fluorescência de raios X, difração de raios X, microscopia eletrônica de varredura e análise térmica (TG-ATD
Cerâmica. Publicado em: 06/06/2019
-
10. Um sistema comercial-cultural de importação de porcelanas de mesa francesas no Brasil do século XIX
Resumo O presente artigo propõe uma incursão pelos meandros do comércio de porcelanas de mesa francesas no Brasil do século XIX. Trabalhando na perspectiva da cultura material, busca compreender as características e valores que presidem a produção de porcelanas na França e apreender os mecanismos que se estabelecem, por meio do comércio de exportaç
Varia hist.. Publicado em: 2019-04
-
11. Use of Experimental Design to Evaluate the Effect of the Incorporation of Quartzite Residues in Ceramic Mass for Porcelain Tile Production
The potential of using quartzite residues in the composition of an industrial ceramic mass for porcelain tile production was investigated through experimental design. Chemical, physical and microstructural analyses were accomplished to understand how the incorporation of quartzite residues affects the material, before and after sintering. Central composite d
Mat. Res.. Publicado em: 29/10/2018
-
12. Análisis de la forma de onda de señales de Emisión Acústica producida en ensayos de interfaces ceramo-metálicas
ABSTRACT The study of ceramic-metal interface is of special importance in odontology area by the current demand about dental prostheses, so it is very important to be more and more similar to natural teeth and with a long service life. With the aim of assessing in detail the behavior of ceramic-metal interface used in dental restorations systems, in this wor
Matéria (Rio J.). Publicado em: 19/07/2018