Estimating the reduction of the firing temperature produced by the addition of energetic fluxes in porcelain tiles through the Fluegel’s model

AUTOR(ES)
FONTE

Cerâmica

DATA DE PUBLICAÇÃO

14/11/2019

RESUMO

Resumo Reduzir a temperatura de queima e acelerar o processo de densificação implicam em benefícios econômicos e ambientais. Este estudo utilizou o modelo de viscosidade de Fluegel, desenvolvido para vidros, para estimar a diminuição da temperatura de queima produzida pela introdução de fundentes enérgicos em porcelanatos. Os resultados experimentais confirmaram a predição do modelo para a adição de wollastonita, uma redução de 30 °C na temperatura. No entanto, para a adição de espodumênio, a redução foi ligeiramente maior do que a prevista. Estes resultados sugeriram que o modelo de Fluegel pode ser usado para estimar os efeitos da introdução de fundentes enérgicos em composições de porcelanato. No entanto, as previsões devem ser vistas como uma orientação geral. Entre as limitações do modelo estão a extrapolação dos valores limites estabelecidos pelo modelo para a composição e, sobretudo, a hipótese inicial de que a composição química da fase vítrea em porcelanato é constante.Abstract Reducing the firing temperature and accelerating the densification process bring economic and environmental benefits. This study used Fluegel’s viscosity model, developed for glasses, to estimate the decrease of the firing temperature produced by the introduction of energetic fluxes in a porcelain body. The experimental results confirmed the prediction of the model, a 30 ºC reduction in the temperature, for the addition of wollastonite. However, for the addition of spodumene, the reduction was slightly higher than the predicted. These results suggested that Fluegel’s model may be used to estimate the effects of the introduction of energetic fluxes in porcelain tile compositions. However, the predictions should be seen as a general orientation. Among the limitations of the model were the extrapolation of limit values established by the model for the composition and, above all, the initial hypothesis that the chemical composition of the vitreous phase in porcelain tiles is constant.

Documentos Relacionados