Polymeric Thin Films
Mostrando 1-12 de 38 artigos, teses e dissertações.
-
1. Evaluation of Carbon Nanotubes/Polyaniline Thin Films for Development of Electrochemical Sensors
Thin films of multiwalled carbon nanotubes/polyaniline nanocomposites (CNT/PAni) were synthesized through the liquid/liquid (L/L) interfacial route, deposited over glass substrates, and evaluated through cyclic voltammetry and amperometry as electrochemical sensor, using L-ascorbic acid as probe. Films with three different CNT/PAni ratios have been prepared.
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
2. Effect of solvents on the morphology of PMMA films fabricated by spin-coating
Abstract A method to produce thin layer of PMMA (poly (methyl methacrylate) films by spin coating is reported. PMMA is dissolved in xylene, a mixture of MIBK-xylene and chloroform. Varying the PMMA concentration and spin-coating speeds controls the thickness of the PMMA films. Using chloroform as solvent evidenced thickness around 10 μm. This thickness is s
Polímeros. Publicado em: 21/09/2017
-
3. Effects from Gold Electrodes on the Electron-Phonon Coupling of Poly(p-phenylenevinylene) Films
Interface effects between metal electrodes and organic films are crucial for the overall performance of organic electronics devices. We investigate effects from gold electrodes deposited on spin-coated films of poly(p-phenylene vinylene) (PPV). While a thin Au layer (16 nm) did not affect the absorption and emission spectra of PPV, a 64 nm thick Au layer ind
J. Braz. Chem. Soc.. Publicado em: 2015-09
-
4. Espectroscopia ultrarrápida do polímero semicondutor luminescente MEH-PPV com excitação no ultravioleta / Ultrafast spectroscopy of the luminescent semiconducting polymer MEH-PPV with ultraviolet excitation
The optoelectronics industry is currently undergoing a transition period in which inorganic materials are being replaced by organic materials, oligomers and polymers, in the fabrication of some types of devices. However, factors such as low efficiency and low lifetime prevent polymer based devices on entering the market definitely. The solution of these issu
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 17/08/2012
-
5. Caracterização térmica e estrutural de pós e filmes finos de BaTiO3 sintetizados via método Pechini / Thermal and structural characterization of powders and thin films of BaTiO3 synthesized by Pechini method
Amorphous oxides are chemical compositions whose atomic or molecular configuration does not follow a periodicity like it happens with crystals, which are essentially constituted by oxygen atoms, which has to be the most electronegative element, and other elements. The barium titanate (BaTiO3), amorphous oxide obtained through this work has tetragonal structu
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/02/2012
-
6. Ca1-xSrxSnO3 (x = 0; 0,25; 0,50; 0,75 e 1): filmes obtidos por métodos físicos e químicos e pós obtidos pelo método dos precursores poliméricos / Ca1-xSrxSnO3: films obtained by PLD and CSD and powders by polymeric precursor method
SrSnO3 e CaSnO3 apresentam estrutura perovskita ortorrômbica, proveniente das distorção e inclinações de seus octaedros. Estas distorções favorecem a obtenção de materiais com propriedades dielétricas e semicondutoras, levando a inúmeras aplicações no setor tecnológico. Neste trabalho, pós de SrSnO3 foram obtidos pelo método dos precursores p
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 06/05/2011
-
7. Radar absorbing materials based on titanium thin film obtained by sputtering technique
Abstract: Titanium thin films with nanometer thicknesses were deposited on polyethylene terephthalate (PET) substrate using the triode magnetron sputtering technique. It was observed that the titanium thin film-polymeric substrate set attenuates the energy of the incident electromagnetic wave in the frequency range of 8 to 12 GHz. This result allows to consi
J. Aerosp. Technol. Manag.. Publicado em: 2011-12
-
8. Study of the photoluminescent properties of MgTiO3 powder and thin films obtained by the polimeric precursor method / Estudo das propriedades fotoluminescentes de pós e filmes finos de MgTiO3 obtidos pelo método dos precursores poliméricos
In this study, MgTiO3 (MTO) powders and thin films that crystallize in a perovskite ilmenite crystalline structure were obtained and characterized. MTO were synthesized by the polymeric precursor method (PPM), which allows obtaining structurally ordered and disordered structures. In addiction, the photoluminescent properties were investigated as a function o
Publicado em: 2011
-
9. Análise estrutural de filmes finos de hematita produzidos por spin-coating para geração de hidrogênio / Structural analysis of hematite thin films produced by spin-coating for hidrogen generation
Water photolysis at semiconductors is a clean and renewable method for solar energy conversion into hydrogen fuel. Hematite (-Fe2O3) thin films have been presented as a promissory material for water photolysis due to its abundance, chemical stability, environmental compatibility and appropriate band gap energy to absorb a large part of the solar spec
Publicado em: 2010
-
10. DESENVOLVIMENTO DE SUBSTRATOS POLIMÉRICOS AVANÇADOS PARA APLICAÇÃO EM DISPOSITIVOS ORGÂNICOS FLEXÍVEIS / DEVELOPMENT OF ADVANCED POLYMERIC SUBSTRATES FOR APPLICATION IN FLEXIBLE ORGANIC DEVICES
Neste trabalho, desenvolveram-se dois tipos de substratos flexíveis para dispositivos orgânicos. Para tal, usou-se o termoplástico comercial de alto desempenho, poli(éter imida) (PEI), e a celulose bacteriana (CB), um polímero natural e biocompatível comumente utilizado como pele artificial. Os filmes de PEI foram fabricados com boa transparência ópt
Publicado em: 2010
-
11. Obtenção de filmes finos de TiO2 nanoestruturado pelo método dos precursores poliméricos
This work focuses in optimizing setup for obtaining TiO2 thin films by polymeric precursor route due to its advantages on stoichiometric and morphological control. Precursor stoichiometry, synthesis pH, solids concentration and rotation speed at deposition were optimized evaluating thin films morphology and thickness. Thermogravimetry and RMN were applied fo
Química Nova. Publicado em: 2008
-
12. Immobilization of proteins onto polysaccharide surfaces / Imobilização de proteínas sobre superfícies de polissacarídeos
This thesis presents the study on thin film formation and characterization of xyloglucans extracted from two different sources, Hymenaea courbaril (HXG) and Tamarindus indica (TXG) onto Si/SiO2 wafers or amino-terminated wafers, as well as the application of these films as substrates for the immobilization of the lectin concanavalin A (Con A) by means of ell
Publicado em: 2008