Polyamide 6 6
Mostrando 13-24 de 66 artigos, teses e dissertações.
-
13. Effect of compatibilization in situ on PA/SEBS blends
Abstract This paper presents the mechanical, thermal and rheological properties of polymer blends of polyamide 6 (PA) and styrene-butylene-styrene (SEBS) using SEBS-g-MA as a coupling agent. The increase in the interfacial interaction of PA/SEBS blends with the addition of SEBS-g-MA was observed to enhance the mechanical properties studied (excellent elongat
Polímeros. Publicado em: 16/06/2016
-
14. Mechanical and thermomechanical properties of polyamide 6/Brazilian organoclay nanocomposites
Abstract Polymer/clay nanocomposites are a new class of composites with polymer matrices where the disperse phase is a silicate with elementary particles that have at least one of dimensions in nanometer order. Polyamide 6/Brazilian organoclay nanocomposites were prepared by melt intercalation, and the mechanical, thermal and thermomechanical properties were
Polímeros. Publicado em: 15/03/2016
-
15. Studies on the Thermal, Mechanical and Chemical Resistance Properties of Natural Resource Derived Polymers
Cardanol-based epoxidized resole resins (ERCF) were synthesized by reacting resole type phenolic resin (RCF) and epichlorohydrin in basic medium, at 120 °C. Resole type phenolic resins were synthesized by reacting cardanol (C) and formaldehyde (F) in the presence of sodium hydroxide, as catalyst, at five different temperatures ranging between 60-80 °C with
Mat. Res.. Publicado em: 03/11/2015
-
16. Pituitary Adenylate Cyclase Activating Peptide (1-38) and its analog (Acetyl-[Ala15, Ala20] PACAP 38-polyamide) reverse methacholine airway hyperresponsiveness in rats
O objetivo deste estudo foi investigar funcionalmente e estruturalmente efeito broncodilatador do peptídeo ativador da adenilato ciclase pituitária (PACAP1-38) e da acetil-[Ala15, Ala20]PACAP 38-poliamida, potente análogo do PACAP-38, nos ratos desafiados pelo metacolina (MeCh). Ratos Wistar machos foram aleatoriamente divididos em cinco grupos. Grupos 1
Braz. J. Pharm. Sci.. Publicado em: 2015-09
-
17. Improving the mechanical properties of polyamide 6-nanosilica nanocomposites by combining masterbatch technique with in situ polymerization
Um masterbatch (MA) reativo de poliamida 6 (PA6)/SiO2 contendo 20% (fração de massa) de nano-SiO2 foi preparado. Posteriormente, o MA reativo preparado foi usado como carga no preparo de nanocompósitos PA6/SiO2 (RA). A estrutura do RA foi analisada por espectrometria no infravermelho por transformada de Fourier (FTIR), microscopia eletrônica de transmiss
J. Braz. Chem. Soc.. Publicado em: 2014-07
-
18. Development of Polyamide 6/Compound by Recycled Rubber Blends Using Graphitized Polyethylene or Polypropylene with Maleic Anhydride as Compatibilizer Agent
ABSTRACT: The toughening of polyamide 6 is desirable for many applications and may be obtained by adding a phase to the elastomeric matrix. However, this leads to a loss in its rigidity characteristics. Therefore, this study aimed at developing blends of polyamide 6/compound by recycled rubber (SBR-R), with the addition of compatibilizer graphitized polyethy
J. Aerosp. Technol. Manag.. Publicado em: 2013-06
-
19. Influência da geometria da nanocarga na estruturação, orientação e propriedades de filmes tubulares de nanocompósitos de PA6 / Influence of the nanoparticles shape on the structure, orientation and properties of pa6 nanocomposites blown films
The structure and morphology of polymers and consequently their properties are dependent on the processing conditions. During the blown film process, high shear and elongational flows can induce a preferred orientation of the polymer chains; controlling the process conditions, it is possible to obtain films with anisotropic properties. Polymeric nanocomposit
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/06/2012
-
20. Qualidade e vida de prateleira de patê elaborado com subprodutos comestíveis do abate de ovinos. / Quality and shelf life of pâté made with edible by-products from slaughtered lamb.
Many edible meat by-products, produced from the lamb slaughter, are often wasted, although they represent excellent sources of many nutrients. The preparation of pâté may be an alternative to the use of this raw material, and contribute to the development of lamb sector by the offer of new products to the consumer market. The objective of this work was to
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/04/2012
-
21. Desenvolvimento de nanocompósitos de nylon 6 em um reator de bancada em batelada : polimerização in situ em unidade experimental / Development of nylon 6 nanocomposites in a batch reactor : in situ polymerization in experimental unit
Este projeto envolve o estudo e desenvolvimento de materiais compósitos (polímero/carga) nanoestruturados (nanocompósitos), produzidos em uma unidade experimental de polimerização, destinada ao desenvolvimento de Nylon -6 (Poliamida-6 ou PA-6) para novas aplicações como plástico de engenharia. O estudo envolve o processo de polimerização de PA-6 e
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/03/2012
-
22. Nanocomposites of polyamide 6/residual monomer with organic-modified montmorillonite and their nanofibers produced by electrospinning
Nanocomposites of an organic-modified montmorillonite (MMT) and polyamide 6 (PA6) with a residual monomer were produced by melt mixing in a torque rheometer. By wide angle X-rays diffraction (WAXD), intercalated/exfoliated structures were observed in the PA6/MMT nanocomposites with 3 and 5 wt. (%) of MMT; on the other hand, when 7 wt. (%) of MMT was added, a
Materials Research. Publicado em: 07/08/2012
-
23. Evaluation of impact strength of polyamide 6/bentonite clay nanocomposites
Nanocomposites of polymer/clay have had much attention in recent years, particularly those developed with layered silicates due to the need of engineering materials more efficient than pure polymers for certain applications. The level of exfoliation of layered silicates in crystalline structure of polymer matrices has been studied and has been observed that
Materials Research. Publicado em: 26/06/2012
-
24. Polyamide worm gear: manufacturing and performance
The focus of this paper is to establish a characterisation method for seven polyamide (PA) grades to determine the major material to manufacture an automotive worm gear. The composite properties were measured according to the worm gear loadings: tensile strength, Young's modulus, abrasion and impact resistance. They were also correlated to the PA moisture ab
Materials Research. Publicado em: 07/06/2012