Pmma
Mostrando 13-24 de 243 artigos, teses e dissertações.
-
13. Biomechanical Test after Hip Cannulated Screw Removal (in vitro Analysis)
Resumo Objetivo Avaliar, pormeio de ensaio biomecânico, a resistência e a energia necessária para ocorrência de fratura do fêmur proximal em osso sintético após retirada de parafusos canulados em forma de triângulo invertido e comparar os resultados obtidos com técnica de reforço utilizando polimetilmetacrilato (PMMA). Métodos Foramutilizados
Rev. bras. ortop.. Publicado em: 07/10/2019
-
14. Influência da incorporação da HAp e β-TCP no cimento ósseo wollastonita/brushita
RESUMO O elevado número de pacientes com problemas de saúde por doenças ósseas ou traumas tem promovido o desenvolvimento de pesquisas em biomateriais de modo a garantir uma melhor qualidade de vida. Dentre os diversos biomateriais, os cimentos ósseos poliméricos (PMMA) ou cerâmicos (fosfatos e silicatos de cálcio) destacam-se para aplicações em ci
Matéria (Rio J.). Publicado em: 16/09/2019
-
15. RADIOACTIVE CEMENT OF PMMA AND HAP-Sm-153, Ho-166, OR RE-188 FOR BONE METASTASIS TREATMENT
RESUMO Polymethylmetacrylte (PMMA) é um composto utilizado na indústria e desde os anos 80's também tem sido empregado nas áreas odontológica e biomédica como constituinte de cimentos ósseos. A hydroxyapatite (HAp) é uma biocerâmica produzida naturalmente nos ossos. Esses dois componentes são constituintes fundamentais no preparo de cimentos ósseo
Acta ortop. bras.. Publicado em: 2019-02
-
16. Poly (Methyl Methacrylate)-SiC Nanocomposites Prepared Through in Situ Polymerization
In this study, polymeric nanocomposites based on poly(methyl methacrylate) (PMMA) and silicon carbide (SiC) nanoparticles were prepared by radical mass polymerization in the presence of filler. Nanoparticles of SiC with and without surface treatment with organosilane were obtained .The nanocomposites were characterized by X-ray fluorescence (XRF), infrared s
Mat. Res.. Publicado em: 03/09/2018
-
17. Cytotoxicity Assessment of a Poly(methyl methacrylate) Synthesized for the Direct Fabrication of Bone Tissues
ABSTRACT A cytotoxicity study is performed on a poly(methyl methacrylate) polymer (PMMA) to be used for the fabrication of bone tissue by Rapid Prototyping (RP). The solution polymerization is conducted in a pilot plant reactor using more appropriated reagents in consideration of the medical application. Moreover, the polymer is efficiently handled to avoid
Braz. arch. biol. technol.. Publicado em: 28/06/2018
-
18. Long-term microwaving of denture base materials: effects on dimensional, color and translucency stability
Abstract While the combined effect of microwave irradiation with cleansing solutions on denture base materials has been investigated, the effects of only using microwave irradiation and, more importantly, in a long-term basis, was not studied yet. Objective The purpose of this study was to evaluate the effect of a long-term repeated microwaving on the dime
J. Appl. Oral Sci.. Publicado em: 18/06/2018
-
19. Complications with PMMA compared with other materials used in cranioplasty: a systematic review and meta-analysis
Abstract Polymethyl methacrylate (PMMA) has been considered a suitable material for cranioplasty. However, no consensus has been reached concerning the best material for cranioplasty with regard to minimizing complications. Thus, this systematic review and meta-analysis aimed to compare the complication rates of PMMA with those of autologous bone and titaniu
Braz. oral res.. Publicado em: 07/06/2018
-
20. Ensaio biomecânico para determinação do diâmetro de barra conectora de polimetilmetacrilato em fixador esquelético externo tipo Ia no úmero de suínos
RESUMO Fraturas ósseas podem ser corrigidas com a utilização de fixadores esqueléticos externos (FEE), método de estabilização bastante comum. Para tanto, têm-se utilizado barras conectoras de polimetilmetacrilato (PMMA) sem critério de diâmetro, as quais podem quebrar, se ficarem muito delgadas, ou ocasionar incômodo, quando muito pesadas e volum
Arq. Bras. Med. Vet. Zootec.. Publicado em: 2018-06
-
21. Photoluminescence of Solvent-Selected Fluorescent Moieties in MEH-PPV Solutions and Films
In this work, we examined how photoluminescence in poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) is affected by morphology, dictated by the mode of preparation. For that, MEH-PPV dilute solutions in good and non-solvents, thick cast films with poly[methylmethacrylate] (PMMA) as inert matrix and spin-coated thin films were prepared. Thes
J. Braz. Chem. Soc.. Publicado em: 2018-03
-
22. AVALIAÇÃO DE UMA TÉCNICA DE REFORÇO ÓSSEO COM O MÉTODO DE ELEMENTOS FINITOS
RESUMO Objetivos: Avaliar, com o método de elementos finitos (EF), os resultados obtidos com a simulação de queda sobre o trocanter maior, usando a porção proximal de um fêmur sintético, com a finalidade de comparar os valores obtidos antes e após técnica de reforço femoral com cimento de fosfato tricálcico (FT) e polimetilmetacrilato (PMMA). M�
Acta ortop. bras.. Publicado em: 2018-02
-
23. Effect of solvents on the morphology of PMMA films fabricated by spin-coating
Abstract A method to produce thin layer of PMMA (poly (methyl methacrylate) films by spin coating is reported. PMMA is dissolved in xylene, a mixture of MIBK-xylene and chloroform. Varying the PMMA concentration and spin-coating speeds controls the thickness of the PMMA films. Using chloroform as solvent evidenced thickness around 10 μm. This thickness is s
Polímeros. Publicado em: 21/09/2017
-
24. Chemical resistance of core-shell particles (PS/PMMA) polymerized by seeded suspension
Abstract Core-shell particles were produced on seeded suspension polymerization by using polystyrene (PS) as polymer core, or seed, and methyl methacrylate (MMA) as the shell forming monomer. Two synthesis routes were evaluated by varying the PS seed conversion before MMA addition. The main purpose of this work was to investigate the influence of synthesis r
Polímeros. Publicado em: 21/09/2017