Plla
Mostrando 13-24 de 73 artigos, teses e dissertações.
-
13. Nanofibrous Scaffolds for Tissue Engineering Applications
The discipline of tissue engineering opens up the ways for repair and regenerate damaged organs and tissues. In the current work biomimetic nanofibrous scaffolds were fabricated by electrospinning. Poly-L-lactic acid (PLLA) was blended with collagen and gelatin to fabricate PLLLA-collagen and PLLA-gelatin fibrous scaffolds respectively. Pure PLLA and gelatin
Braz. arch. biol. technol.. Publicado em: 06/05/2016
-
14. Biomechanical performance of Bio Cross-Pin and EndoButton for ACL reconstruction at femoral side: a porcine model
Abstract Introduction The method of graft fixation is critical in anterior cruciate ligament (ACL) reconstruction surgery. Success of surgery is totally dependent on the ability of the implant to secure the graft inside the bone tunnel until complete graft integration. The principle of EndoButton is based on the cortical suspension of the graft. The Cross-P
Res. Biomed. Eng.. Publicado em: 04/03/2016
-
15. Caracterização de nanopartículas blenda poliméricas biodegradáveis contendo progesterona
RESUMO: A encapsulação de progesterona em nanopartículas de poli(hidroxibutirato-co-hidroxivalerato) (PHBV), poli (ε-caprolactona) (PCL), poli (L-ácido lático) (PLLA) e em nanopartículas blenda de PHBV/PCL e PHBV/PLLA foi investigada neste trabalho. As nanopartículas foram produzidas pela técnica de miniemulsificação/evaporação do solvente com l
Cienc. Rural. Publicado em: 2015-11
-
16. CARACTERIZAÇÃO E AVALIAÇÃO IN VITRO DE NANOCOMPÓSITOS DE POLI (L-ÁCIDO LÁTICO) E NANOTUBOS DE CARBONO DE PAREDES MÚLTIPLAS PURIFICADOS
Carbon nanotubes (CNT) have been studied for biomedical applications due to their unique properties. However, pristine CNT have structural features and impurities that can cause toxicity to biological systems. In this work, we describe a method to purify multiwalled carbon nanotubes (MWCNT) by chemical modification and subsequent attachment of hydroxyl and c
Quím. Nova. Publicado em: 2015-11
-
17. HYDROLYTIC DEGRADATION BEHAVIOR OF PLLA NANOCOMPOSITES REINFORCED WITH MODIFIED CELLULOSE NANOCRYSTALS
Bionanocomposites derived from poly(L-Lactide) (PLLA) were reinforced with chemically modified cellulose nanocrystals (m-CNCs). The effects of these modified cellulose nanoparticles on the mechanical and hydrolytic degradation behavior of polylactide were studied. The m-CNCs were prepared by a method in which hydrolysis of cellulose chains is performed simul
Quím. Nova. Publicado em: 2015-09
-
18. Influence of Poly-L-Lactic Acid Scaffold's Pore Size on the Proliferation and Differentiation of Dental Pulp Stem Cells
O objetivo desse estudo foi avaliar a influência do tamanho dos poros de um scaffold à base de poli ácido láctico (PLLA) sobre a proliferação e diferenciação de células tronco da polpa dental (dental pulp stem cells - DPSC). Os scaffolds foram preparados dentro da câmara pulpar de discos de terceiros molares (1 mm), utilizando sal como porógeno (1
Braz. Dent. J.. Publicado em: 2015-04
-
19. Graft tendon slippage with metallic and bioabsorbable interference screws under cyclic load: a biomechanical study in a porcine model
Introduction The rupture of the anterior cruciate ligament (ACL) is the most common type of knee injury. Reconstructive surgery is the ‘gold standard’ treatment. During the immediate post-operative period, the fixation of the graft is entirely dependent on the ability of the grafted implant to be secured inside the bone tunnel under the cyclical loads a
Res. Biomed. Eng.. Publicado em: 2015-03
-
20. Preparation of PLLA/PMMA and PLLA/PS binary blend nanoparticles by incorporation of PLLA in methyl methacrylate or styrene miniemulsion homopolymerization
Miniemulsion homopolymerization reactions of methyl methacrylate (MMA) and styrene (STY) using poly(L-lactide) as co-stabilizer were carried out in order to prepare poly(L-lactide)/poly(methyl methacrylate) (PLLA/PMMA) and poly(L-lactide)/polystyrene (PLLA/PS) binary blend nanoparticles. The effect of PLLA concentration on methyl methacrylate (MMA) and styre
Polímeros. Publicado em: 2015-02
-
21. Estudo das células Neuro2A sobre os biomateriais PCL e PLLA
Os biomateriais poli L-ácido lático (PLLA) e o poli caprolactona (PCL) são os polímeros mais estudadas na área dos materiais bioreabsorvíveis. Dentre as suas principais características que contribuem para a interação celular, temos a especificidade química da superfície, elétrica, hidrofobicidade e topografia. Ainda, observa-se o tempo de degrada
Polímeros. Publicado em: 2014-12
-
22. Propriedades mecânicas, tribológicas e térmicas de nanocompósitos de PLLA com nanotubos de carbono de paredes múltiplas
Neste trabalho são estudados os efeitos da adição de nanotubos de carbono de parede múltipla (NCPM) em uma matriz de Poli(L-ácido láctico) (PLLA). Foras avaliadas duas rotas distintas de dispersão dos NCPM, uma utilizando agitação mecânica em solvente e a outra utilizando sonificação de alta energia em solvente. As propriedades mecânicas destes
Polímeros. Publicado em: 2014-08
-
23. The effect of additives interaction on the miscibility and crystal structure of two immiscible biodegradable polymers
Poly lactic acid (PLLA) is a promising biopolymer, obtained from polymerization of lactic acid that is derived from renewable resources through fermentation. The characteristic brittleness of PLLA is attributed to slow crystallization rates, which results in the formation of the large spherulites. Its glass temperature is relative high, above room temperatur
Polímeros. Publicado em: 2014
-
24. Estudo da biocompatibilidade da blenda de poli(L-ácido láctico)/policaprolactona-triol
Polímeros biorreabsorvíveis têm sido estudados para aplicações médicas especialmente nas áreas de ortopedia e traumatologia. Dentre os mais promissores destaca-se o poli(L- ácido láctico), devido a sua elevada resistência e boa biocompatibilidade. Apesar dessas características os dispositivos obtidos a partir do PLLA têm baixa elongação e um ca
Polímeros. Publicado em: 19/04/2013