Plastic Mold
Mostrando 1-12 de 17 artigos, teses e dissertações.
-
1. Influences of the mesh in the CAE simulation for plastic injection molding
Abstract Although computer-aided engineering (CAE) software has been used for many years in the plastic industry, identifying the most appropriate mesh geometry and density remains a challenge. It can affect the accuracy of the simulation, the time and the costs. The evaluation of the most suitable mesh is not easy because the difficulties to obtain the real
Polímeros. Publicado em: 04/11/2019
-
2. Simulation of an Injection Process Using a CAE Tool: Assessment of Operational Conditions and Mold Design on the Process Efficiency
The present work developed an experimental and simulation study to evaluate the influence of some operational conditions and mold design on the efficiency of an injection process used to produce polystyrene parts. The software SolidWorks Plastic was used to simulate the injection process and assess the performance of the mold considering the absence and the
Mat. Res.. Publicado em: 17/01/2019
-
3. Influence of temperature and packaging type on quality parameters and antimicrobial properties during Yateí honey storage
Abstract Tetragonisca fiebrigi, is a bee of the subfamily Meliponidae traditionally known as Yateí. Its honey differs from the honey produced by Apis mellifera because it is less viscous, more acidic, has sweetness and particular aromas. It is important to know the behavior of yatei honey in different storage conditions, in order to preserve the characteris
Food Sci. Technol. Publicado em: 21/12/2017
-
4. Analysis and modeling of simulated residual stress of mold injected plastic parts by using robust correlations
ABSTRACT The injection molding process is the most widely used processing technique for polymers. The analysis of residual stresses generated during this process is crucial for the part quality assessment. The present study evaluates the residual stresses in a tensile strength specimen using the simulation software Moldex3D for two polymers, polypropylene an
Matéria (Rio J.). Publicado em: 02/10/2017
-
5. Development of a Material for Manufacturing a Mold for Plastic Injection
Injection molding is a process used to manufacture high volumes of plastic containers of complex geometric shapes. Although CuBe has always been used, there are currently some alternative alloys such as the CuNiSiCr alloy that has lower manufacturing cost and similar properties. The objective of this paper is to characterize, by techniques of microscopy, the
Mat. Res.. Publicado em: 07/08/2017
-
6. Effect of the presence of brood and fungus on the nest architecture and digging activity of Acromyrmex subterraneus Forel (Hymenoptera, Formicidae)
ABSTRACT This study investigated the stimuli that trigger digging behavior in Acromyrmex subterraneus during nest building. The hypothesis was that the presence of the fungus garden and/or brood triggers the excavation of tunnels and chambers. For the experiment, the excavation rate of individually marked workers kept in plastic cylinders filled with soil wa
Rev. Bras. entomol.. Publicado em: 2017-01
-
7. Design of conformal cooling for plastic injection moulding by heat transfer simulation
The cooling channels of a mold for plastic injection have to be as close as possible to the part geometry in order to ensure fast and homogeneous cooling. However, conventional methods to manufacture cooling channels (drilling) can only produce linear holes. Selective laser melting (SLM) is an additive manufacturing technique capable to manufacture complex c
Polímeros. Publicado em: 2015-12
-
8. Mechanical characterization of sisal fiber-reinforced recycled HDPE composites
The increasing awareness of the environment protection has contributed to concerns regarding alternative procedures for recycling of plastic wastes. Since chemical processes are high cost, energy and often environment harmful, thermo-mechanical techniques of recycling rises as a good alternative. This research deals with mechanical characterization of thermo
Mat. Res.. Publicado em: 02/08/2013
-
9. Contribuição para os usuários de sistemas CAD/CAM/CNC em operação de fresamento de topo em aço para moldes e matrizes / Contribution to the users of systems CAD/CAM/CNC in end milling operation in steel for molds and dies
The increased in the demand for plastic products and the need for reduction manufacturing times, and the growing dependence of man on the computer in present day, especially in manufacturing activities, has resulted in constant research of technological developments in order to supply these needs. In dies and molds manufacturing industry for plastic injectio
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/06/2011
-
10. Desenvolvimento de um novo aço para moldes de plástico
Uma nova liga a base de ferro (aço) para moldes plásticos foi obtida com características melhoradas quando comparada aos materiais usualmente utilizados no mercado. Os materiais, existentes no mercado, usados como referência neste trabalho, também não são indicados para utilização que necessitem acabamentos especiais. Para aplicações de uso restri
Publicado em: 2010
-
11. Avaliação da inflência da diferênça de temperatura entre as placas de um molde de injeção no empenamento de peças injetadas
Nowadays, warpage is one of the main concerns at the design stage and manufacturing of plastic components. Warpage hinders the achievement of specified tolerances in the project, resulting in financial losses due to manufacturing problems and consumer complaints. Usually, solution of such problems relies on the knowledge of the designer or process technician
Publicado em: 2008
-
12. Analysis of blowmold machine hydraulic system to reduce positioning time. / Análise do sistema hidráulico de uma sopradora para redução do tempo de posicionamento.
Many times, for some products classes, inputs as packaging may have an expressive weight in the final product cost structure. In the case of products packaged into plastic containers, this is an usual scenario that has as result, the increase of performance requirements of the blow mold machines that produce such containers. A point to be studied in the blow
Publicado em: 2007