Design of conformal cooling for plastic injection moulding by heat transfer simulation

AUTOR(ES)

Marques, Sabrina, Souza, Adriano Fagali de, Miranda, Jackson, Yadroitsau, Ihar

FONTE

Polímeros

DATA DE PUBLICAÇÃO

2015-12

RESUMO

The cooling channels of a mold for plastic injection have to be as close as possible to the part geometry in order to ensure fast and homogeneous cooling. However, conventional methods to manufacture cooling channels (drilling) can only produce linear holes. Selective laser melting (SLM) is an additive manufacturing technique capable to manufacture complex cooling channels (known as conformal cooling). Nevertheless, because of the high costs of SLM the benefits of conformal collings are still not clear. The current work investigates two designs of conformal coolings: i) parallel circuit; ii) serial circuit. Both coolings are evaluated against to traditional cooling circuits (linear channels) by CAE simulation to produce parts of polypropylene. The results show that if the conformal cooling is not properly designed it cannot provide reasonable results. The deformation of the product can be reduced significantly after injection but the cycle time reduced not more than 6%.

Documentos Relacionados

• Influences of the mesh in the CAE simulation for plastic injection molding
• Simplified engine/nacelle heat transfer case analysis via CFD modeling for supporting the preliminary design of nacelle cooling/ventilation system.
• A New Approach to Multidisciplinary Design Optimization of Solid Propulsion System Including Heat Transfer and Ablative Cooling
• Infiltration condition and mouldability diagram in resin injection moulding
• Design of the austempering heat treatment of a ductile iron differential case aided by computer simulation