Physical And Mechanical Properties
Mostrando 13-24 de 539 artigos, teses e dissertações.
-
13. USE OF RESIDUES FROM THE CELLULOSE INDUSTRY AND SUGARCANE BAGASSE IN PARTICLEBOARDS
ABSTRACT The use of alternative materials such as lignocellulosic residues in the production of particleboards has increased considering that these residues are produced in large volumes and often do not have an appropriate destination. This research studied the use of residues from cellulose industries, sugarcane bagasse, and castor oil-based polyurethane r
Eng. Agríc.. Publicado em: 2021-02
-
14. CARACTERIZAÇÃO FÍSICA E QUÍMICA DA BIOMASSA USADA COMO COMBUSTÍVEL SÓLIDO EM UMA CALDEIRA
Biomass is a renewable energy source most used in the world, however, depending on the chemical properties and origin of the material used as biofuel, the amount of ash generated during combustion can be high, harming the energetic harnessing. The objective of this study was to characterize chemically and physically biomass: bark, sawdust, and urban pruning;
Quím. Nova. Publicado em: 2021-01
-
15. MECHANICAL AND PHYSICAL PROPERTIES OF WOOD/POLYETHYLENE COMPOSITE REINFORCED WITH TIO2 NANOPARTICLES
ABSTRACT Wood plastic composite was fabricated using high density polyethylene and pine wood fiber. The effect of addition of TiO2 nanoparticles at different weight fractions (0%, 1%, 3%, and 5%) on some properties of the composite was examined. The experimental composites were tested for bending strength, tensile strength, Izod impact strength, thickness sw
CERNE. Publicado em: 2020-12
-
16. BEHAVIOR OF THERMALLY MODIFIED WOOD TO BIODETERIORATION BY XYLOPHAGE FUNGI
ABSTRACT Thermally modified wood undergoes chemical, physical, and mechanical modifications, resulting in changes in resistance to wood biodegrading agents. The objective of this study was to evaluate the resistance to biodeterioration of thermally modified wood by the industrial process VAP HolzSysteme® of Eucalyptus grandis, Pinus taeda and Tectona grandi
CERNE. Publicado em: 2020-09
-
17. PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLEBOARD FROM Eucalyptus grandis PRODUCED BY UREA FORMALDEHYDE RESIN WITH SiO2 NANOPARTICLES
ABSTRACT The use of nanoparticles appears to be a feasible option for improving the quality of a range of wood-based products. Studies show that they can improve both the physical and mechanical properties of wood and wood-based products. This preliminary study aimed to analyze the influence of SiO2 nanoparticles on the physical and mechanical properties of
Eng. Agríc.. Publicado em: 2020-06
-
18. Geomechanical characterization of carbonates of the Sete Lagoas Formation (Bambuí Group)
Abstract The geomechanical properties of rock masses must be identified to assess their quality and employability; however, the methodologies may differ depending on the lithotype and analytical purposes. The present study aimed to estimate the not-well-known physical-mechanical properties of three types of carbonate rocks (calcarenite, calcilutite, and marb
REM, Int. Eng. J.. Publicado em: 2020-03
-
19. Polyurethane/poly (Ionic Liquids) Cellulosic Composites and their Evaluation for Separation of CO2 from Natural Gas
The development of both versatile and inexpensive sorbents for CO2/CH4 separation has become one of the greatest challenges to the environment and natural gas processing. This study reports the preparation and characterization of polyurethane (PU)/ cellulose based poly(ionic liquid)(CPIL) composites for CO2/CH4 separation. PU matrix was reinforced with CPIL
Mat. Res.. Publicado em: 20/01/2020
-
20. Influence of treatment with water-soluble CCB preservative on the physical-mechanical properties of brazilian tropical timber
This aim of this work is to present an analysis of the influence of impregnation against biological demand, realized with saline solution of CCB (Chromated Copper Borate preservative) by vacuum-pressure process, on physical-mechanical properties of tropical wood species Simarouba sp., Cedrelinga catenaeformis and Erisma uncinatum Warm. In theory, such proces
Mat. Res.. Publicado em: 13/01/2020
-
21. Study about concrete with recycled expanded polystyrene
Resumo O concreto leve obtido com adição de partículas de poliestireno expandido (EPS) é conhecido como concreto com EPS. Estudaram-se neste trabalho as propriedades de concretos com adição de EPS para uso em paredes estruturais. O EPS por ser um material produzido em larga escala e possuir baixa densidade, produz um grande volume de resíduos. Esses r
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
22. EVALUATION OF THE Peltophorum vogelianum Benth. WOOD SPECIES FOR STRUCTURAL USE
ABSTRACT Wood is a material used for various purposes since ancient times and is mainly used in civil and rural construction and industry. Due to the predatory exploitation of known trees, it is necessary to characterize new species for use in urban and rural structures as alternatives of species commonly used. This study aimed to determine the physical and
Eng. Agríc.. Publicado em: 09/12/2019
-
23. PHYSICAL, MECHANICAL AND THERMAL BEHAVIOUR OF ADOBE STABILIZED WITH THE SLUDGE OF WASTEWATER TREATMENT PLANTS
ABSTRACT The need for treated water is essential for life. With the constant increase in population, the most common way to purify surface water is through conventional water treatment plants (WTPs). The high volume of residue (sludge) generated in this process is most often returned to the catchment site, negatively affecting the ecosystem. The sludge of WT
Eng. Agríc.. Publicado em: 09/12/2019
-
24. Mineral deposition promoted by resin-based sealants with different calcium phosphate additions
Abstract The aim of this study was to evaluate the influence of different calcium phosphates (CaPs) on the physical, biological, and remineralizing properties of experimental resin-based sealants (RBSs). Triethylene-glycol dimethacrylate (90wt%) and bisphenol A-glycidyl methacrylate (10wt%) were used to produce resin-based sealants. Hydroxyapatite (SHAp), α
Braz. oral res.. Publicado em: 25/11/2019