Photoluminescence Spectroscopy
Mostrando 1-12 de 73 artigos, teses e dissertações.
-
1. Enhancement of Visible Light-Responsive Photocatalytic Efficiency by Using a Laccaic Acid-Modified Titanium Dioxide Photocatalyst
In this study, a laccaic acid-modified TiO2 photocatalyst (Lac-TiO2) was prepared via an impregnation method with 0.50, 1.00, 2.50, and 5.00 wt.% laccaic acid. The products’ physical properties were examined through X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), X-ray photoemission spectroscopy (XPS), UV-Vis diffused
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Synthesis and characterization of α-SnWO4 powders obtained by microwave-assisted hydrothermal method
Abstract The structural, morphological, and optical properties of α-SnWO4 synthesized by microwave-assisted hydrothermal method at 150 °C for different times were investigated. XRD revealed the formation of the orthorhombic phase, without the presence of a secondary phase. The sample processed for 64 min showed a reduction in unit cell volume, suggesting a
Cerâmica. Publicado em: 2022
-
3. Improving Photoluminescence Quantum Yield of CdTe Quantum Dots Using a Binary Solvent (Water + Glycerin) in the One-Pot Approach Synthesis
The present work describes the comparison of the optical and structural properties between CdTe quantum dots (QD) synthesized in water and in the binary solvent (water + glycerin) via one-pot approach synthesis. The optical properties of the nanocrystals obtained with different synthesis parameters were characterized by UV-visible and photoluminescence spect
J. Braz. Chem. Soc.. Publicado em: 2021-04
-
4. MÉTODO MANUAL PARA DEPOSIÇÃO DE TINTAS FOTOLUMINESCENTES BASEADAS EM LOFS MISTAS APLICADO A CODIFICAÇÃO DE DOCUMENTOS
In this work, the process of synthesis of Metal-Organic Frameworks containing lanthanide ions (LOFs), accelerated via a precipitating agent, capable of accelerating the process of nucleation of MOF crystals, in order to explore the optical properties of this precursor solution (SP_Gd/EU-MOF), as a quick-response photoluminescent material in the coding of off
Quím. Nova. Publicado em: 2020-12
-
5. Preparation of Fluorescent Carbon-Based Dots from Waste Tire Pyrolysis
The pyrolysis of waste tire has been proposed as an alternative route to its recycling producing residual oils that can be used as fuels. In this work, a physicochemical process to obtain carbon-based dots (CBD) from carbon black (CBL) derivatives of tires is described. For this, the CBL was treated with different acids to produce CBL1 and CBL2 particles sus
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
6. F-127-Assisted Sol-Gel Synthesis of Gd2O3:Eu3+ Powders and Films
In the current work, the influence of Pluronic F-127 (S = F-127) and temperature on the luminescent properties of Gd2O3:Eu3+ (Gd:S = 1:2) powders and films was studied. In order to synthesize the powders and films (by the dip-coating technique), Gd2O3: Eu3+ (5 mol%) ceramics were elaborated by the sol-gel route, using gadolinium and europium nitrates as prec
Mat. Res.. Publicado em: 08/04/2019
-
7. Structural and Optical Properties of GaN Thin Films Grown on Si (111) by Pulsed Laser Deposition
In this work we present results and analysis concerning the processing and characterization of Gallium Nitride (GaN) thin films (TF) grown on Si (111) substrates by pulsed laser deposition technique (PLD), which were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL) and Raman spectroscopy (RS). The GaN films show
Mat. Res.. Publicado em: 14/01/2019
-
8. Effect of thermal treatment on points defects of Al-N codoped ZnO films
ABSTRACT The effect of annealing temperature on the structural properties of Al-N codoped ZnO films were studied by X-ray diffraction, photoluminescence and Raman spectroscopy. ZnO films were deposited by sputtering technique on silicon substrates at 20 ºC, Al-concentration was kept constant and N-flow was changed to 6, 12 and 15 sccm. A thermal treatment w
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Effect of Different Synthesis Methods on the Textural Properties of Calcium Tungstate (CaWO4) and Its Catalytic Properties in the Toluene Oxidation
Calcium tungstate (CaWO4) crystals were prepared by microwave-assisted hydrothermal (MAH) and polymeric precursor methods (PPM). These crystals were structurally characterized by X-ray diffraction (XRD), N2 adsorption, X-ray absorption near edge spectroscopy (XANES) and extended X-ray absorption fine structure (EXAFS) measurements. The morphology and size of
Mat. Res.. Publicado em: 16/04/2018
-
10. Annealing Effects on the Structural and Optical Properties of ZnO Nanostructures
ZnO nanostructures were synthesized by a proteic sol-gel method, using zinc nitrate hexahydrate and gelatin as precursors. Size and shape evolution of ZnO nanostructures were achieved by annealing temperature in the range 250-1000 ºC. The crystalline structure, morphology and optical properties of the ZnO nanoparticles were characterized by X-Ray Diffractio
Mat. Res.. Publicado em: 05/03/2018
-
11. Photoluminescence of Solvent-Selected Fluorescent Moieties in MEH-PPV Solutions and Films
In this work, we examined how photoluminescence in poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) is affected by morphology, dictated by the mode of preparation. For that, MEH-PPV dilute solutions in good and non-solvents, thick cast films with poly[methylmethacrylate] (PMMA) as inert matrix and spin-coated thin films were prepared. Thes
J. Braz. Chem. Soc.. Publicado em: 2018-03
-
12. Characterization of CBD-CdS Doped with Some Rare Earths III (Eu3+,Ce3+) as Function of Synthesis Time
Rare earths (Europium, cerium)-doped CdS nanofilms are prepared using the growth technique chemical bath deposition (CBD) at the reservoir temperature of 70±2°C varying the synthesis time in a wide range. For the rare earths doped CdS nanofilms the synthesis time was ranged from 80 to 135 min. The rare earths molar concentration was in the range 0.0≤x≤
Mat. Res.. Publicado em: 01/02/2018