Phbv
Mostrando 1-12 de 54 artigos, teses e dissertações.
-
1. In vitro Evaluation of PHBV/PCL Blends for Bone Tissue Engineering
The objective of this study was to evaluate Vero cells in in vitro biocompatibility tests with pure PHBV and PCL and 75/25 and 50/50 blends developed for bone tissue bioengineering in dense or porous forms. The biomaterials were characterized morphologically by scanning electron microscopy, (SEM) stereoscopic imaging (SI), and micrometer measurement. Cellula
Mat. Res.. Publicado em: 25/11/2019
-
2. The influence of natural clay and organoclay vermiculite on the formation process of bionanocomposites with poly (3-hydroxybutyrate-co-3-hydroxyvalerate)
ABSTRACT During the last decades, a lot of research work focused on several biodegradable and biosourced polyesters for the purpose of reducing the non-degradable polymer wastes. These polyesters are particularly considered to be promising polymers for biomedical applications and short life-time products like packaging. As these packagings are rapidly discar
Matéria (Rio J.). Publicado em: 02/10/2017
-
3. PHBV/cellulose nanofibrils composites obtained by solution casting and electrospinning process
ABSTRACT In this work, nanobiocomposites of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) reinforced with cellulose nanofibrils (CNFs) were produced by electrospinning and solution casting process. CNFs were obtained by sulfuric acid hydrolysis from Imperata brasiliensis fibers. Nanocomposites loaded with 1 (wt. %) of CNFs were prepared using a mixtur
Matéria (Rio J.). Publicado em: 20/07/2017
-
4. Serum microRNA-30c levels are correlated with disease progression in Xinjiang Uygur patients with chronic hepatitis B
We aimed to investigate the potential role and mechanism of microRNA-30c (miR-30c) in the pathological development of chronic hepatitis B (CHB). The serum levels of miR-30c in hepatitis B virus (HBV) carrier Xinjiang Uygur patients with inactive, low-replicative, high-replicative and HBe antigen-positive CHB were investigated. HepG2 cells were co-transfected
Braz J Med Biol Res. Publicado em: 04/05/2017
-
5. Biodegradation of additive PHBV/PP-co-PE films buried in soil
Abstract There is considerable concern about the impact plastic materials have on the environment due to their durability and resistance to degradation. The use of pro-oxidant additives in the polymer films could be a viable way to decrease the harmful effects of these discarded materials. In this study, films of PHBV/PP-co-PE (80/20 w/w) and PHBV/PP-co-PE/a
Polímeros. Publicado em: 14/06/2016
-
6. Preparation and Characterization of Maleic Anhydride Grafted Poly(Hydroxybutirate-CO-Hydroxyvalerate) – PHBV-g-MA
A compatibilizer agent was successfully produced by grafting maleic anhydride (MA) to poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) chains on a reactive processing by mechanical mixing, using a mixture of PHBV, MA and dicumyl peroxide (DCP) as initiator. The resulting PHBV grafted MA (PHBV-g-MA) was characterized by Fourier transform infrared (FTIR) spectr
Mat. Res.. Publicado em: 12/02/2016
-
7. Caracterização de nanopartículas blenda poliméricas biodegradáveis contendo progesterona
RESUMO: A encapsulação de progesterona em nanopartículas de poli(hidroxibutirato-co-hidroxivalerato) (PHBV), poli (ε-caprolactona) (PCL), poli (L-ácido lático) (PLLA) e em nanopartículas blenda de PHBV/PCL e PHBV/PLLA foi investigada neste trabalho. As nanopartículas foram produzidas pela técnica de miniemulsificação/evaporação do solvente com l
Cienc. Rural. Publicado em: 2015-11
-
8. Biodegradation of films of low density polyethylene (LDPE), poly(hydroxibutyrate-co-valerate) (PHBV), and LDPE/PHBV (70/30) blend with Paecilomyces variotii
The increased consumption of plastics in the world has been a subject of great concern and special attention by the scientific community. The aim is to promote development of materials that are biodegradable in a shorter time upon disposal in the environment. The most used synthetic plastics are difficult to biodegrade because they are made of long hydrocarb
Polímeros. Publicado em: 2015-02
-
9. Natural additives for poly (hydroxybutyrate - CO - hydroxyvalerate) - PHBV: effect on mechanical properties and biodegradation
In this work, the improvement of mechanical properties in biodegradable materials was obtained through the incorporation of natural and also biodegradable plasticizers and nucleation agents into the PHBV copolymer. PHBV production with different quantities of additives was obtained by extrusion followed by injection. The additives in the copolymer were effic
Mat. Res.. Publicado em: 21/10/2014
-
10. Efeito do tratamento alcalino de fibras de Curauá sobre as propriedades de compósitos de matriz biodegradável
Neste trabalho avaliou-se a influência do tratamento alcalino das fibras de curauá, nas concentrações de 1, 5 e 10%(m/v) de NaOH, nas propriedades dos compósitos com matriz de PHBV e 20% m/m de fibras de curauá. Os compósitos foram moldados por extrusão e injeção e avaliadas suas as propriedades morfológicas, térmicas e mecânicas. Os resultados
Polímeros. Publicado em: 20/05/2014
-
11. Nanopartículas de poli-hidroxibutirato-co-valerato como suporte para a imobilização da lipase de Candida antarctica fração B
This work evaluates the immobilization of Candida antarctica lipase (Fraction B) using poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) nanoparticles as support. The effects of immobilization time (30-150 min) and pH (5-10) on lipase loading were evaluated. The stability of the immobilized enzyme towards temperature (40, 60, and 80 ºC), reuse and storage (at
Quím. Nova. Publicado em: 2014-04
-
12. Influence of poly(ethylene grycol) - (PEG) on the properties of influence of poly(3-hydroxybutyrate-CO-3-hydroxyvalerate) - PHBV
Films of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) - PHBV with polyethylene glycol (PEG) were prepared by casting solvent evaporation. The thermal behavior, morphology, crystallinity and molecular weight of these films were studied by the following techniques: differential scanning calorimetry (DSC), scanning electron microscopy (SEM), X-ray diffraction (
Polímeros. Publicado em: 11/06/2013