Path Testing
Mostrando 1-12 de 27 artigos, teses e dissertações.
-
1. Symptomatic Aortic Valve Mass - Cardiac Work-Up Challenges and Role of Computed Tomography Angiography: A Case Report
Abstract Cardiac papillary fibroelastoma are rare, benign cardiac tumors that may lead to lethal complications from embolization or valvular dysfunction if left untreated. When working up symptomatic tumors with concomitant angina, traditional diagnostic studies such as cardiac catheterization may predispose the patient to embolic complications if the mass i
Braz. J. Cardiovasc. Surg.. Publicado em: 26/08/2019
-
2. Evaluation of DPP® and SNAP® Rapid Tests for diagnosis of Leishmania infantum canine infections
Abstract INTRODUCTION: Visceral leishmaniasis is a disease that affects humans, wildlife, and domestic species. Since dogs play a key role in urban Leishmania spp. transmission, the Brazilian government maintains the Monitoring and Control Program of Visceral Leishmaniasis (VLMCP) in endemic regions, which promotes awareness campaigns aiming to enhance the
Rev. Soc. Bras. Med. Trop.. Publicado em: 18/07/2019
-
3. Improving the reference standard for the diagnosis of canine visceral leishmaniasis: a challenge for current and future tests
BACKGROUND Studies aimed at validating canine visceral leishmaniasis diagnostic tests present heterogeneous results regarding test accuracy, partly due to divergences in reference standards used and different infection evolution periods in animals. OBJECTIVE This study aimed to evaluate the accuracy of the rapid test-dual path platform (TR-DPP) (Biomangu
Mem. Inst. Oswaldo Cruz. Publicado em: 31/01/2019
-
4. PCR-RFLP assay as an option for primary HPV test
Persistent human papillomavirus (HPV) infection is an essential factor of cervical cancer. This study evaluated the analytical performance of restriction fragment length polymorphism polymerase chain reaction (PCR-RFLP) assay compared to PapilloCheck® microarray to identify human papilloma virus (HPV) in cervical cells. Three hundred and twenty-five women w
Braz J Med Biol Res. Publicado em: 26/03/2018
-
5. Comportamiento bi-modal de una fundición gris y un acero estructural al carbono en corrosión atmosférica marina acelerada
ABSTRACT According to data gathered in the last Metal Foundry Industrial Production Survey [1], approximately 46% of the industrial production of ferrous alloys is gray-iron. In this context the study of the atmospheric corrosion resistance of gray-iron becomes interesting to asset its useful life when subject to weathering conditions. The studies of gray-ir
Matéria (Rio J.). Publicado em: 22/06/2017
-
6. Effects of processing parameters on microstructure and ultimate tensile strength of thixoformed AM60B magnesium alloy
The effects of processing parameters, such as the punch speed, reheating duration and reheating temperature, on microstructure and ultimate tensile strength (UTS) of thixoformed AM60B magnesium alloy have been investigated. The results indicate that low punch speed, short reheating duration or low reheating temperature often produces the defect of cold shuts
Materials Research. Publicado em: 17/07/2012
-
7. Mathematical modeling for digestible protein in animal feeds for tilapia
The objective of this study was to formulate mathematical models to estimate digestible protein in some animal feeds for tilapia. Literature results of the proximate composition of crude protein, ether extract, and mineral matter, as well as digestible protein obtained in biological assays, were used. The data were subjected to multiple linear stepwise backw
Revista Brasileira de Zootecnia. Publicado em: 2012-06
-
8. Desenvolvimento de união de multimateriais através de rebitagem por injeção (Injection Clinching Joining) / Development of multimaterial joints through injection clinching joining
Multimaterial structures are currently a technologically attractive field of research. The growing use of polymer composites replacing metals in structures aiming for weight and emission reduction is part of the motivation of this study. The currently used techniques adhesive bonding and mechanical fastening are limited in certain aspects, opening a path for
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 22/06/2011
-
9. Constraint-driven test scheduling for NoC-based systems
On-chip integrated network, the so-called networkon- chip (NoC), is becoming a promising communication paradigm for the next-generation embedded core-based system chips. The reuse of the on-chip network as test access mechanism has been recently proposed to handle the growing complexity of testing NoC-based systems. However, the NoC reuse is limited by the o
Publicado em: 2011
-
10. Colapsibilidade com sucção controlada de um solo coluvionar e laterítico de Campinas/SP / Collapsibility with controlled suction of a colluvial and lateritic soil from Campinas/SP
This study aims at investigating the collapsibility of coluvionar and lateritic soil by oedometer tests with controlled suction, performed in the laboratory, and by the interpretation of the soilimpregnated thin plates before and after the tests, so as to take into account the differences between natural and "after collapse" structures. The undisturbed soil
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/05/2010
-
11. Infraestrutura e produtividade no Brasil
Infrastructure and productivity in Brazil. This article analyses the relationship between infrastructure and total factor productivity (TFP) in Brazil during the second half of the twenty century. Public capital is used as a proxy for infrastructure capital. The hypothesis to be tested is that an increase in infrastructure - more than than a rise in the priv
Brazilian Journal of Political Economy. Publicado em: 2010-12
-
12. Estudo do encruamento dos aços AISI 304 e AISI 409 com uso da técnica de cisalhamento planar simples
This research analyzed the effect of successive changes in the strain path of AISI 304 (type 304N) and AISI 409 stainless steel sheets on their work hardening behavior. Plastic deformation was imposed on these materials employing successive simple planar shear, tension or plane strain. These steels were chosen because of their contrasting work hardening beha
Publicado em: 2009