Particles Method
Mostrando 1-12 de 827 artigos, teses e dissertações.
-
1. Evaluation of the Properties of LaNiO3 Material Prepared by the Modified Proteic Method for Adsorption of Environmental Contaminants
LaNiO3 material was synthesized by modified proteic method, calcined at 900 °C/2 h in air atmosphere and was applied to remove environmental contaminants. LaNiO3 phase with a perovskite structure was formed in the calcined material, which has a surface area of 22 m2 g-1 and is formed by fine particles agglomerated, with pH of the zero charge point of 7.44.
Journal of the Brazilian Chemical Society. Publicado em: 2023
-
2. Thermostimulated crystal structure transformation of the polymineral clay submicron particles
Abstract Changes in the structure of phyllosilicate microparticles of submicron fractions of polymineral clay with an average size of 290 nm, as well as changes in the positions of impurity ions of transition metals in the crystal lattice, were studied by X-ray diffraction analysis, Fourier transform infrared spectroscopy, and high-resolution electron parama
Cerâmica. Publicado em: 2022
-
3. Thermal, structural and optical properties of magnetic BiFeO3 micron-particles synthesized by coprecipitation method: heterogeneous photocatalysis study under white LED irradiation
Abstract Bismuth ferrite, BiFeO3 (BFO) prepared via a coprecipitation method, was used as an effective photocatalyst for the degradation of methylene blue (MB) using a white light-emitting diode (LED-50 W) lamp. The as-prepared material was characterized by TGA, XRD, SEM-EDX, FTIR, and UV-vis-DRS techniques. The effects of experimental key parameters such as
Cerâmica. Publicado em: 2022
-
4. A Novel In Silico Monte Carlo Approach to Optimize a PSD Estimation Problem. Generation of Data Fusion Experiment Rules
ABSTRACT This article analyzes the performance of combining information from Scanning Electron Microscopy (SEM) micrographs with Static Light Scattering (SLS) measurements for retrieving the so-called Particle Size Distribution (PSD) in terms of experimental features. The corresponding data fusion is implemented using a novel Monte Carlo-based method consist
Trends in Computational and Applied Mathematics. Publicado em: 2022
-
5. Analytical method validation for the identification and quantification of dissolved gold and gold nanoparticles in cosmetics products by single particle inductively coupled plasma mass spectrometry
Nanoparticle (NP) applications have recently gained more space in the development of many products, especially in cosmetology. The aim of the present study was to validate a single particle inductively coupled plasma mass spectrometry technique for the detection and quantification of gold nanoparticles (AuNPs) and gold ions (Au (i)) in different cosmetics cu
Quím. Nova. Publicado em: 2021-06
-
6. Effect of pH level and calcination on the production of calcium phosphates by acidic route of wet precipitation
Abstract Multiphasic calcium phosphate powders were synthesized by the acidic route, using lactic acid as a chelating agent that allows the production of a stable and rich solution of calcium and phosphate ions at room temperature. After pH adjusting, without varying the concentrations of precursor solution, XRD and FTIR analyses showed different CaP phases
Cerâmica. Publicado em: 2021-06
-
7. Magnetic and Mesoporous Silica-Niobia Material as Modifier of Carbon Paste Electrode for p-Nitrophenol Electrochemical Determination
In the present work, the sol-gel synthesis method was employed as strategy to obtain a magnetic and mesoporous silica-niobia material. The planned synthesis was based on the hetero-condensation of niobium and silicon alkoxide precursors, in the presence of spherical magnetite particles. The resulting material presented interesting characteristics such as mag
J. Braz. Chem. Soc.. Publicado em: 2021-03
-
8. Properties of Cu-Co Composite Catalysts for Synthesis of Aliphatic Alcohols
Cu-Co-containing cellulose-based carbon composite materials (Cu-Co/Cel) were formed by a matrix isolation method. Using X-ray diffraction (XRD), transmission electron microscopy (TEM), infrared-Fourier spectroscopy (IR-Fourier spectroscopy), and non-isothermal research methods, the physicochemical properties of the composites were established. The catalysts
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
9. Discrete element modeling of non-spherical particles using a spherical shape
Abstract Real non-spherical particles can be modeled using the Discrete Element Method (DEM) with sphere clusters, superquadrics, or polyhedral particles. However, in applications involving a considerable number of particles, the analysis can become impracticable. The goal of this study is to demonstrate how well spherical particles can reproduce the flow of
REM, Int. Eng. J.. Publicado em: 2020-09
-
10. Tear down academic paywall during pandemic
Zinc hexacyanoferrate (ZnHCF) is a Prussian Blue analog and can be intercalated by both monovalent and divalent ions. ZnHCF/multi-walled carbon nanotube (MWCNT) film could be used as a cathode for zinc ions battery. Carbon nanotubes improved significantly the electrochemical performance of the electrode. It is described the preparation of ZnHCF/MWCNT films b
Braz. J. Biol.. Publicado em: 2020-09
-
11. Zinc Hexacyanoferrate/Multi-Walled Carbon Nanotubes Films for Rechargeable Aqueous Batteries
Zinc hexacyanoferrate (ZnHCF) is a Prussian Blue analog and can be intercalated by both monovalent and divalent ions. ZnHCF/multi-walled carbon nanotube (MWCNT) film could be used as a cathode for zinc ions battery. Carbon nanotubes improved significantly the electrochemical performance of the electrode. It is described the preparation of ZnHCF/MWCNT films b
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
12. Dielectric and Magnetic Properties of Epoxy with Dispersed Iron Phosphate Glass Particles by Microwave Measurement
Abstract This paper investigates the dielectric properties and magnetic properties of epoxy composites with different amount of powdered iron phosphate glass (IPG) at 8.2 GHz to 12.4 GHz using microwave technique. IPG composed of 60P2O5-40Fe2O3 (mol%) was produced by conventional melt and quenching method and crushed into powder. The IPG powder was character
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-06