Particle Suspension
Mostrando 13-24 de 109 artigos, teses e dissertações.
-
13. Production, solubility and antioxidant activity of curcumin nanosuspension
Curcumin is a powerful bioactive agent and natural antioxidant, but it is practically water-insoluble and has low bioavailability; a possible solution to this obstacle would be formulations of curcumin nanoparticles. Surfactants such as tween 80 can be used to stabilize low-solubility molecules preventing particle aggregation. The objectives of this study we
Food Sci. Technol. Publicado em: 2015-03
-
14. Electrophoretic deposition of BaTi0.85Zr0.15O3 nanopowders
The present study reports the results of thick films (20-130 µm) produced through electrophoretic deposition of BaTi0.85Zr0.15O3 (BTZ) nanometric powders synthesized by the Pechini's method. The BTZ powderscalcined at 600°C/2h presented a single crystalline phase with an average particle size of ~20nm. To thick films deposition, a stable suspension of acet
Mat. Res.. Publicado em: 29/07/2013
-
15. Design and evaluation of famotidine mucoadhesive nanoparticles for aspirin induced ulcer treatment
The present study was performed to design and evaluate the famotidine loaded mucoadhesive nanosuspension for aspirin induced ulcer. A 3-factor, 3-level Box-Behnken design was applied to study the effects of amount of the beads (X1), PVPK-30(X2) and Tween-80 (X3) on the particle size (Y1), and cumulative percentage drug released after 1h (Y2). The optimizatio
Braz. arch. biol. technol.. Publicado em: 2013-04
-
16. Aqueous dispersion of red clay-based ceramic powder with the addition of starch
The optimum dispersion and rheological properties of red clay-based ceramic suspension loaded with unary and binary starch were investigated in aqueous medium. The aqueous ceramic suspension was prepared consisting of red clay, quartz, feldspar, and distilled water. Using a polyelectrolyte dispersant (Darvan 821A), the ternary ceramic powder was initially op
Mat. Res.. Publicado em: 22/01/2013
-
17. Otimização da separação sólido-líquido em hidrociclones mediante modificações geométricas
Because of advantages such as low cost, simple structure, large capacity of suspension processing and small dimensions, hydrocyclones are widely used for separating dispersed phase (liquid or solids) from continuous one. The shape and size of a hydrocyclone has a decisive effect on the internal flow structure of the continuous phase, and therefore, the separ
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/11/2012
-
18. Experimental study of micro-particle fouling under forced convective heat transfer
Particulate fouling studies of a hydrocarbon based suspension containing 2 µm alumina particles were performed in an annular heat exchanger having a hydraulic diameter of 14.7 mm. During fouling experiments, the classical asymptotical behavior was observed. It is shown that particle concentration, fluid velocity, and wall temperature have strong influences
Braz. J. Chem. Eng.. Publicado em: 2012-12
-
19. Otimização de parâmetros concentrados de suspensão para conforto e segurança veicular / Optimization of lumped parameters of suspension for vehicle comfort and safety
The present work evaluates the optimization of lumped parameters of suspension on vehicles and considers the importance of this process to minimize the rms vertical acceleration transmitted to ensure comfort and safety to the driver. Thus, this work aims to develop a model able to represent the whole vehicle and, then, optimize the parameters of stiffness an
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
20. Síntese e caracterização de beads acrílicos preparados por polimerização em suspensão visando aplicação como excipiente farmacêutico para compressão direta
One of the difficulties reported for the suspension polymerization is control the size and granulometry of beads. The purpose of this work was to evaluate the use of cellulose nanowhiskers and mesoporous silica as stabilizers to reduce the size and the particle distribution. To monitor polymerization process was used FTIR-ATR spectroscopy. The morphology was
Química Nova. Publicado em: 2012
-
21. Desenvolvimento de um sistema para detecção de dispersóides no ar
The amount of dust suspended in air can be harmful to human health if not complied with the limits previously established by the WHO (World Health Organisation). The air is polluted when it contains elements foreign to its natural composition: oxygen, nitrogen, noble gases and water vapor and even carbon dioxide. The most common forms of air pollution are ca
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/04/2011
-
22. A study of the initiator concentration’s effect on styrene-divinylbenzene polymerization with iron particles
This paper describes the preparation of magnetic copolymer obtained from suspension polymerization of styrene (Sty) and divinylbenzene (DVB) in the presence of iron particles treated and not treated with oleic acid. The magnetic copolymers were characterized according to their morphology, particle size distribution and magnetic properties. The results show t
Polímeros. Publicado em: 13/12/2011
-
23. Production of bone cement composites: effect of fillers, co-monomer and particles properties
Artificial bone cements (BCs) based on poly(methyl methacrylate) (PMMA) powders and methyl methacrylate (MMA) liquid monomer also present in their formulation small amounts of other substances, including a chemical initiator compound and radiopaque agents. Because inadequate mixing of the recipe components during the manufacture of the bone cement may compro
Brazilian Journal of Chemical Engineering. Publicado em: 2011-06
-
24. Influence of pH of colloidal suspension on the electrical conductivity of SnO2 thin films deposited via Sol-Gel-Dip-Coating
Tin dioxide (SnO2) thin films are deposited by the dip-coating technique from colloidal suspensions prepared with distinct pH through the sol-gel method. The decrease of the pH contributes to the destruction of an electrical layer adjacent to particles in solution, leading to a high degree of aggregation among these particles due to the generation of cross-l
Materials Research. Publicado em: 04/03/2011