Particle Density
Mostrando 1-12 de 640 artigos, teses e dissertações.
-
1. INTERFERENCE OF OPERATING SPEED AND PHYSICAL PROPERTIES OF GRANULATED FERTILIZERS WITH THEIR DEPOSITION
ABSTRACT Uniformity in the deposition of granulated fertilizers in the seed furrow is essential for crop development and productivity. Quantitative (dose and flow) and qualitative factors (segregation and formulation) influence granulated fertilizer distribution throughout its application. This experiment aimed to compare the deposition of two granulated fer
Engenharia Agrícola. Publicado em: 2022
-
2. Obtainment of a new metal matrix composite from the recycling of UNS S31803 duplex stainless steel by powder metallurgy
Abstract The purpose of circular economy is to maximize resources efficiency. With the increase in consumption of raw materials, energy and waste generation, recycling is necessary for environmental and industrial reasons. Thus, the powder metallurgy, together with mechanical milling, stands as a new method for scraps recycling. This study aimed to produce U
REM - International Engineering Journal. Publicado em: 2022
-
3. Influence of the addition of niobium oxide on the properties of fused aluminum oxide used in abrasive tools
Abstract Fused alumina is a material used in the manufacturing of abrasive tools, due to its high fusion point, great hardness, and mechanical toughness. In this context, this study addressed the influence of niobium addition on the properties of fused alumina for abrasive applications. A comparison was also made between this oxide and the brown fused alumin
Cerâmica. Publicado em: 2022
-
4. Microstructure and diametral fracture strength of spark plasma sintered WC-6Co-0.2B and WC-6Co-0.5B ceramic composites from nanosized and metastable WC powders
Abstract The present work aimed at evaluating the microstructures and mechanical properties of spark plasma sintered WC-6 wt% Co ceramic composites doped with boron (0.2 and 0.5 wt%). W-50 at% C (W-6.13 wt% C) powders produced under different milling times (20, 60, 180, and 600 min) were used as starting materials and subsequently mixed with Co (6 wt%) and B
Cerâmica. Publicado em: 2022
-
5. Influence of the physical characteristics of sand and the crushed filler content on the properties of self-leveling mortars
Abstract The properties of self-leveling mortars (SLMs) in the fresh and hardened state are strongly affected by their formulation. In this study, the influence of three different quartz sands (different physical characteristics) was investigated in SLMs, as well as the replacement of these sands by crushed basalt filler. The tests performed were: spreading,
Cerâmica. Publicado em: 2021-06
-
6. Effective density concentration in refractory gold ore for characterization purposes
Abstract This article evaluates the efficiency, benefits and limitations of pre-concentration by density separation for process mineralogy studies of low-grade gold ore. The pre-concentration by density aims to generate a product with a high content of gold and to maximize the number of gold-bearing particles characterized, thereby increasing the representat
REM, Int. Eng. J.. Publicado em: 2020-12
-
7. INFLUENCE OF ALBUMIN ON GUAVA PULP POWDER OBTAINED BY FOAM-MAT DRYING
ABSTRACT Guava is a fruit that stands out for its aroma, intense flavor, vitamins, and minerals. Its availability as a powdered food enhances its commercial applications. This study aimed to evaluate mathematical models for adsorption isotherms and determine the properties and flowability of guava pulp powder obtained by foam-mat drying. The models of GAB, B
Eng. Agríc.. Publicado em: 2020-06
-
8. A UTILIZAÇÃO DE FITOMASSA NA RECUPERAÇÃO DE SOLO DEGRADADO - VILA BURITI / MANAUS (AM)
Resumo Este trabalho teve como objetivo avaliar a recuperação de uma área degradada a partir do uso de fitomassa associada ao uso da Theobroma Grandiflorun Schum (cupuaçu). Soma-se a esse objetivo o monitoramento do crescimento dos indivíduos da espécie estudada; mensuração do acréscimo de nutrientes ao solo; comparação das propriedades físicas d
Mercator (Fortaleza). Publicado em: 09/12/2019
-
9. Effect of resin content and pressing temperature on banana pseudo-stem particle boards properties using full factorial design
Abstract: The volume of global gross banana exports reached a record of 117.9 million tonnes in 2015 (FAO 2017), which agro-industrial wastes derived as the pseudo-stem, rachis and leaves do not have an industrial application instead they are discarded. This research study applies full factorial design and response surface methodology to determine the effect
An. Acad. Bras. Ciênc.. Publicado em: 02/12/2019
-
10. PROPERTIES OF PARTICLEBOARD PANELS MADE OF SUGARCANE PARTICLES WITH AND WITHOUT HEAT TREATMENT
RESUMO O objetivo deste trabalho foi determinar as propriedades de painéis aglomerados confeccionados com partículas de bagaço de cana-de-açúcar in natura e aquecidas a 250 °C durante 5 minutos. Foram empregadas várias proporções de partículas na confecção dos painéis e as suas propriedades foram comparadas com as propriedades de um painel fabri
Rev. Árvore. Publicado em: 25/11/2019
-
11. Análise do desempenho de adensamento da massa refratária de sílica usada em fornos de indução
Resumo As indústrias de fundição de ferro fundido usam em seu processo grande quantidade de sucata zincada, o que tem contribuído para a redução da campanha do revestimento refratário de fornos de indução a cadinho já que o vapor de zinco formado no aquecimento migra para o centro do refratário, condensando em regiões externas do forno, próximo
Cerâmica. Publicado em: 14/11/2019
-
12. Characterization of arrowroot starch in different agronomic managements
ABSTRACT Arrowroot is a plant originated in Latin America that has aroused interest in the food industry due to its high starch content, with differentiated characteristics and high commercial value. However, information on the management of arrowroot are scarce, precluding its commercial competition with other similar species, being necessary further studie
Rev. Ceres. Publicado em: 11/11/2019