Parametric Design
Mostrando 49-60 de 119 artigos, teses e dissertações.
-
49. Simulação do processo de adsorção psa para separação da mistura etanol-água / Simulation of the adsorption process psa for separation of ethanol-water mixtures
One of the problems with ethanol production is the high energy cost which is associated with the separation of ethanol due to of excess water and the existence of an azeotrope in the mixture ethanol-water, by conventional distillation the mixture can be separated up to 95% weight. Currently, there is great interest in the development of technological process
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/07/2011
-
50. Análise paramétrica e dimensionamento de poços de infiltração para fins de drenagem urbana / Parametric analysis and design of infiltration wells for urban drainage
A combinação entre a falta de planejamento urbano e o crescimento indiscriminado de áreas impermeáveis é responsável pela ocorrência de enchentes em centros urbanos. O emprego de dispositivos de controle do escoamento superficial na fonte geradora, como poços e trincheiras de infiltração, pavimentos permeáveis e jardins de infiltração (rain gard
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/04/2011
-
51. Methodology for the Design of Cover Systems Based on the Case Study Conducted at Site Rio Paracatu Mineração (RPM) in Paracatu, Minas Gerais / Metodologia para Dimensionamento de Sistemas de Cobertura com Base em Estudo de Caso Realizado na Mina da Empresa Rio Paracatu Mineração (RPM) em Paracatu, Minas Gerais
Nearly four years ago, two experimental cover systems of the evapotranspirative type, have been designed and built in Rio Paracatu Mineração (RPM), Paracatu, Minas Gerais (Amorim, 2008). One cover system was made with a hydraulic barrier layer and the other with a capillary barrier layer, both with monitoring systems consisting of a runoff meter, lysimeter
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/01/2011
-
52. µ-synthesis for unmanned underwater vehicles current disturbance rejection
This note focuses attention on a novel approach to disturbance rejection when the µ-synthesis control procedure is applied to Unmanned Underwater Vehicles (UUVs). Environmental external disturbances simplify to ocean current for a totally submerged vehicle and greatly contributes for hydrodynamical loads and the tether cable disturbance. Our case scenario d
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-09
-
53. A Procedure for the Parametric Identification of Viscoelastic Dampers Accounting for Preload
Passive vibration isolators are usually made of viscoelastic materials. These materials have non-linear characteristics that change their dynamical properties with temperature, frequency and strain level. The vibration isolator’s mathematical modeling and optimal design requires the prior knowledge of the stiffness and damping of the applied viscoelastic m
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-09
-
54. Otimização da forma para captação da radiação solar sobre superfícies de edifícios : um exercício de integração entre os programas Rhinoceros e Ecotect
Este trabalho tem como objetivo explorar a forma de planos de fachada vinculados à incidência solar, potencializando a aplicação de sistemas fotovoltaicos. A identificação e parametrização de formas segundo os princípios geométricos de captação fotovoltaica, sugerem a aplicação de uma metodologia de projeto para superfícies de fachadas fotovol
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2011
-
55. Wideband dual-layer patch antenna fed by a modified L-strip
A wideband patch antenna is proposed. By using the dual-layer patch configuration and modified L-strip feed technique, the impedance bandwidth of the patch antenna for VSWR<1.2 is broadened to 22% with respect to 900 MHz, which is superior to the other available patch antennas. In addition, by means of the modified L-shaped strip, the high cross polarization
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2010-12
-
56. Behavior analysis of bar gaps in welded YT-joints for rolled-steel circular hollow sections
We present a parametric analysis of gap variation between the lap brace and through brace of YT welded joints for rolled-steel circular hollow sections on plane steel structures. Our aim is to investigate the collapse behavior of YT-joints under lap brace axial compression. In particular, we focus on e/d0 ratios above 0.25 so bending moments can be taken int
Latin American Journal of Solids and Structures. Publicado em: 2010
-
57. Projeto e construção de um amplificador paramétrico óptico operando no infravermelho médio / Design and construction of an optical parametric amplifier operating in the mid-infrared
Um Amplificador Paramétrico Óptico (optical parametric amplifier - OPA) é uma fonte de luz coerente, de alta qualidade e sintonizável, baseada em processos ópticos não-lineares de segunda ordem. Alguns modelos possuem largura de banda estreita e um amplo intervalo de sintonia, podendo alcançar regiões que vão desde o ultravioleta até o infravermelh
Publicado em: 2010
-
58. Desenvolvimento de um método de controle de distorções para aplicação em problemas de design de superfície de formas tridimensionais não planificáveis
Este trabalho tem por objetivo desenvolver um método de controle de distorção adequado ao design de superfície de produto industrial, com forma tridimensional não planificável, produzido em larga escala, de modo a minimizar as distorções gráficas procedentes da aplicação de uma imagem bidimensional em um objeto tridimensional com superfície não
Publicado em: 2010
-
59. DESENVOLVIMENTO, OTIMIZAÇÃO E VALIDAÇÃO DE METODOLOGIAS POR ELETROFORESE CAPILAR PARA ANÁLISE DE FÁRMACOS UTILIZADOS NO TRATAMENTO DA TUBERCULOSE
The main focus of this thesis was the development, optimization and validation of analytical methodologies for analysis of pharmaceutical preparations used for tuberculosis treatment, which contain as active ingredients, ethambutol (ETB), isoniazid (ISO), rifampicin (RIF) and pyrazinamide (PYR) isolated or in association. Two analytical methodologies for ETB
Publicado em: 2010
-
60. Observation versus mothers and teachers reports about social competence and problematic behaviors in preschooler / Observação versus relato de mães e professoras sobre competência social e comportamentos problemáticos em pré-escolares
The literature has produced evidence that: (a) the early assessment and intervention in social skills can prevent and overcome problematic behaviors; (b) in the case of assessment, there are limits and advantages to different procedures generally used as well as a consensus about the importance of the multimodal design; (c) studies that investigate the relat
Publicado em: 2010