Oxide Glass
Mostrando 1-12 de 112 artigos, teses e dissertações.
-
1. Synthesis of TiO2/ZnO photoanodes on FTO conductive glass for photovoltaic applications
Abstract For oxide semiconductors for application in dye-sensitized solar cells (DSSCs), titanium dioxide conjugated with zinc oxide thin films was synthesized and characterized. The UV (ultraviolet) spectrum characterization showed a peak of absorbance at around 355 nm, with a band gap of 3.25 eV and reflectance around 85%. Such characteristics allowed the
Cerâmica. Publicado em: 2023
-
2. Study of electrophoretic deposition of ZnO photoanodes on fluorine-doped tin oxide (FTO) glass for dye-sensitized solar cells (DSSCs)
Abstract Semiconductors, such as zinc oxide (ZnO), are used in different scientific fields, including energy. This study applied ZnO thin films on a photovoltaic cell, specifically a dye-sensitized solar cell (DSSC). ZnO was used in solar cells due to its characteristics such as electronic mobility. Electrophoretic deposition (EPD) is an efficient method to
Cerâmica. Publicado em: 2022
-
3. Biogenic synthesis of silver nanoparticles from thyme extract for functionalization of a bioactive glass produced from rice husk ash
Abstract The rice husk, agro-industrial residue, stands out for having silica, the main oxide former of the bioactive glass. To avoid contamination in this biomaterial, substances with bactericidal properties, like silver can be incorporated. Thus, the objective of this work is the synthesis of silver nanoparticles to functionalize a bioactive glass synthesi
Cerâmica. Publicado em: 2022
-
4. Designing and fabrication of a low-cost dip-coater for rapid production of uniform thin films
In this work, a self-made dip-coater equipment was developed for the fabrication of thin films. The assembly of the apparatus was carried out using simple mechanical and electronic pieces, recycle parts, and spending an inexpensive budget suitably. The production, software design, and features of the device were focused on the sol-gel dip-coating method, whi
Química Nova. Publicado em: 2022
-
5. Determination of 3,4,5-Trihydroxybenzoic Acid Exploiting a Visible-Light-Driven Photoelectrochemical Platform: Application in Wine and Tea Samples
The present work is based on the development and application of a photoelectrochemical method for the amperometric determination of 3,4,5-trihydroxybenzoic acid in different samples. The method is based on the use of a photoelectrochemical platform based on a glass slide coated with fluorine-doped tin oxide, which has been modified with cadmium sulfide and p
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
6. Device for Streptavidin Detection Using LSPR and Electrochemical Transductions on the same Platform
Research in biosensing currently occupies an important role among biomolecular detection techniques, especially with respect to medical diagnoses. Is this sense, the development of biosensors based on the localized surface plasmon resonance (an optical transducer) or electrochemical transductions have been highlighted. However, optical and electrochemical de
J. Braz. Chem. Soc.. Publicado em: 2021-04
-
7. Dendritic Gold Nanoparticles Towards Transparent and Electroactive Electrodes
Abstract: The combination of UV-visible absorption and electrochemical experiments (spectroelectrochemistry) enables to obtain highly specific spectroscopic information (in situ and operando) from modified surfaces. However, such application can be limited by the self-absorbance, for example, when metallic nanoparticles are present on modified surfaces. Indi
An. Acad. Bras. Ciênc.. Publicado em: 28/11/2019
-
8. Graduate and Undergraduate Teaching of Primary Tooth Pulpectomy: A Comparison among Brazilian Dental Schools
Abstract Objective: To compare the teaching of the pulpectomy in primary teeth among graduate and undergraduate Brazilian dental schools. Material and Methods: From August 2015 to July 2016, an 11-question survey was sent to 44 graduate and 207 undergraduate dental schools. Data obtained were summarized using descriptive statistics. Results: The response
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 02/09/2019
-
9. Al-doping and Properties of AZO Thin Films Grown at Room Temperature: Sputtering Pressure Effect
Aluminum zinc oxide (AZO) thin films were synthesized on glass substrates by radio frequency (rf) magnetron sputtering from a metallic Zn-Al (5 at. %) target at room temperature. The morphological, structural, electrical and optical properties of the films were studied as a function of the sputtering pressure, which was varied from 0.1 to 6.7 Pa. X-ray diffr
Mat. Res.. Publicado em: 09/05/2019
-
10. Recombination Study of Dye Sensitized Solar Cells with Natural Extracts
Natural dyes can be used in dye sensitized solar cells (DSSCs) to generate low-cost devices, although with low light harvesting because of energy losses from the recombination process. This study investigates recombination reactions in DSSCs with natural dyes extracted from eggplants, plums, and hibiscus flowers. Titanium dioxide films were coated on a fluor
J. Braz. Chem. Soc.. Publicado em: 2019-02
-
11. Nb-doped Ti2O3 Films Deposited Through Grid-Assisted Magnetron Sputtering on Glass Substrate: Electrical and Optical Analysis
Abstract Niobium doped dititanium trioxide (Ti2O3:Nb) films were deposited on glass substrates, through grid-assisted magnetron sputtering. The Ti2O3:Nb films were characterized by X-ray diffraction (XRD), electrical conductivity and optical properties. Film deposition was carried out in two different substrate bias modes: DC and unipolar pulsed. Results sho
Mat. Res.. Publicado em: 24/01/2019
-
12. Physical Properties of Sputtered Indium-doped ZnO Films Deposited on Flexible Transparent Substrates
Indium-doped zinc oxide (IZO) polycrystalline thin films were grown on polyethylene terephthalate (PET), polyethylene naphthalate (PEN), and as reference on 7059 Corning glass substrates at room temperature by radio frequency magnetron sputtering from a target prepared with a mixture of ZnO and In2O3 powders. The structural, optical, and electrical propertie
Mat. Res.. Publicado em: 06/09/2018