Oxide Glass
Mostrando 13-24 de 112 artigos, teses e dissertações.
-
13. POLÍMERO BIODEGRADÁVEL ANTIMICROBIANO ATRAVÉS DA ADITIVAÇÃO COM COMPOSTOS À BASE DE ZINCO
Antimicrobial packaging is a promising type of active packaging, which has an antimicrobial agent incorporated into the polymer matrix, capable to eliminate or inhibit deteriorating and/or pathogenic microorganisms. The zinc compounds are antimicrobial agents commonly used to confer this feature. The objective of this work was to evaluate the antimicrobial a
Quím. Nova. Publicado em: 2018-04
-
14. Resistivity Reduction of Nanostructured Undoped Zinc Oxide thin Films for Ag/ZnO Bilayers Using APCVD and Sputtering Techniques
Nanostructured undoped zinc oxide (ZnO) thin films were deposited using atmospheric pressure chemical vapor deposition (APCVD) on glass substrates using zinc acetate dehydrate [C4H6O4Zn·2H2O, ZnAc] in less than 2 minutes for each sample. In order to reduce the resistivity of ZnO films, a very thin layer of Ag was deposited on top of the films via the sputte
Mat. Res.. Publicado em: 15/03/2018
-
15. Structural, optical and electrical properties of Ni-doped Co3O4 prepared via Sol-Gel technique
In this article, Nickel doped Cobalt oxide thin films and powders have been prepared on glass substrates using sol gel based dip coating process in order to investigate their optical, structural and electrical properties. The Ni concentration was changed from 0 to 9 wt(%).The synthesized samples were characterised by Ultraviolete visible analysis, X-ray diff
Mat. Res.. Publicado em: 07/02/2018
-
16. Sputtering Power Induced Physical Property Variation of Nickel Oxide Films by Radio Frequency Magnetron Sputtering
NiO thin films were deposited on Si and Corning 1737 glass substrates using radio frequency (rf) magnetron sputtering system. The physical properties of NiO films under different sputtering power were thoroughly studied. The XRD results indicated that as-prepared NiO films with the sputtering power above 100 W developed only (200) preferred orientation. The
Mat. Res.. Publicado em: 01/02/2018
-
17. Lead hazard evaluation for cathode ray tube monitors in Brazil
Abstract Cathode ray tube (CRT) monitors are electronic equipment mainly made of glass, polymers and metals. These devices became obsolete because of emerging technologies such as LCD, LED and plasma; thus generating a huge stockpile of e-waste worldwide. In this CRT study, a natural leaching simulation (NBR10005) was performed to determine the toxicity of t
Braz. J. Chem. Eng.. Publicado em: 2018-01
-
18. ITO Obtained by Spray Pyrolysis and Coating on Glass Substrate
Conductive thin films have various applications in different technological fields. Indium tin oxide (ITO) is a mixed oxide. In the film form, ITO has been widely employed as electrode in many optoelectronic devices. Methods like thermal evaporation, sputtering, chemical vapor deposition (CVD), electron beam, spray coating, and sol-gel synthesis give ITO thin
J. Braz. Chem. Soc.. Publicado em: 2017-12
-
19. Annealing effects on the structural and optical properties of vanadium oxide film obtained by the hot-filament metal oxide deposition technique (HFMOD)
ABSTRACT Vanadium oxide films amorphous, nonstoichiometric and highly absorbing in the optical region were deposited on ITO-coated glass and on silicon substrates, by the hot-filament metal oxide deposition technique (HFMOD) and oxidized by ex-situ annealing in a furnace at 200, 300, 400 and 500 ºC, under an atmosphere of argon and rarefied oxygen. X-ray di
Matéria (Rio J.). Publicado em: 11/05/2017
-
20. Crystallization of Anatase TiO2 in Niobium Potassium Phosphate Glasses
In this work, the glass forming ability was studied in potassium phosphate glasses with increasing amounts of TiO2 in order to obtain a glass-ceramic with photocatalytic properties. The first studied series has been the binary system (100-x) KPO3-xTiO2. Homogeneous and transparent glasses could be obtained with x varying from 10 to 30 mole%. Since the photoc
Mat. Res.. Publicado em: 16/02/2017
-
21. Preparation of novel magnetic polyurethane foam nanocomposites by using core-shell nanoparticles
Abstract Iron oxide magnetic nanoparticles (NP's) converted to the core- shell structres by reacting with by n-(2-aminoethyl)-3-aminopropyl trimethoxysilane (AEAP) incorporated in polyurethane flexible (PUF) foam formulations. Fourier transform spectra, thermal gravimetric analysis, scanning electron images, thermo-mechanical analysis and magnetic properties
Polímeros. Publicado em: 08/12/2016
-
22. Electrical and Optical Transport Characterizations of Electron Beam Evaporated V Doped In2O3 Thin Films
Vanadium (5 at. %) doped Indium Oxide (V: In2O3) thin films with different thicknesses (50 nm, 100 nm and 150 nm) were prepared onto glass substrate by electron beam evaporation technique in a vacuum of about 4×10-3 Pa. X-ray diffraction (XRD) pattern revealed that the prepared films of thickness 50 nm are amorphous in nature. Temperature dependence of elec
Mat. Res.. Publicado em: 08/12/2016
-
23. Paralavas in the Cretaceous Paraná volcanic province, Brazil - A genetic interpretation of the volcanic rocks containing phenocrysts and glass
ABSTRACT The occurrences of glassy rocks containing long and curved phenocrysts in the Paraná volcanic province, South America, are here interpreted as paralavas. The large number of thin (0.1-0.5 m) dikes and sills of glassy volcanic rocks with hopper, hollow or curved, large crystals of clinopyroxene (up to 10 cm), plagioclase (up to 1 cm), magnetite and
An. Acad. Bras. Ciênc.. Publicado em: 2016-12
-
24. Morphological, Structural and Optical Properties of ZnO Thin Films Deposited by Dip Coating Method
Zinc oxide (ZnO) thin films were deposited on glass substrat by dip coating technique. The effects of sol aging time on the deposition of ZnO films was studied by using the field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), and optical transmission techniques. The morphology of the films strongly dep
Mat. Res.. Publicado em: 28/11/2016