Numerical Simulation
Mostrando 25-36 de 813 artigos, teses e dissertações.
-
25. Numerical Simulation of Atom-Transfer Radical Polymerization of tert-butyl Methacrylate
Block copolymers based on tert-butyl methacrylate (tBMA) have many uses, such as thermo‐responsive polymers, amphiphilic copolymers, and many applications in the medical field. Atom-transfer radical polymerization (ATRP) is the main technique to produce these controlled macromolecular architectures. This paper provides a simplified kinetic modeling and com
Mat. Res.. Publicado em: 02/09/2019
-
26. Numerical Study on Response Characteristics of Solid Rocket Pintle Motor
ABSTRACT: Pintle technology is currently a versatile technology used in a solid rocket motor (SRM) to control the desired thrust by changing the nozzle throat area, while effectively controlling the chamber pressure at the same time. The sudden movement of the pintle can induce rapid changes in the flow field and the occurrence of pressure oscillations insid
J. Aerosp. Technol. Manag.. Publicado em: 26/08/2019
-
27. A Note on Parameter Identification of the AISI 304 Stainless Steel Using Micromechanical-Based Phenomenological Approaches
Austenitic stainless steels have largely been used in industrial equipment, architectural components and consumer items amongst others. Numerical simulation of manufacturing processes of such components and parts requires adequate hardening descriptions and accurate inelastic parameters. This work addresses these issues for the AISI 304 stainless steels base
Mat. Res.. Publicado em: 19/08/2019
-
28. Study of natural ventilation in a Gothic multi-tunnel greenhouse designed to produce rose (Rosa spp.) in the high-Andean tropic
Resumo Nas regiões tropicais, a produção de plantas ornamentais é desenvolvida exclusivamente em estufas plásticas ventiladas de forma natural, o que significa que em algumas ocasiões microclimas inadequados são gerados com altas temperaturas e umidade que limitam o desenvolvimento produtivo das plantas. O objetivo deste trabalho foi estudar os fluxos
Ornam. Hortic.. Publicado em: 12/08/2019
-
29. SIMULATION OF THERMAL DECOMPOSITION IN AN OPEN CAVITY: ENTROPY ANALYSIS
ABSTRACT This paper presents a numerical analysis of entropy generation in a two-dimensional rectangular channel where the inlet flow undergoes thermal decomposition resulting from a chemical reaction. The model considered viscosity and thermal conductivity to be dependent of temperature. Irreversibility due to mass transport was included in the entropy gene
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
30. Deforestation impact on discharge regime in the Doce River Basin
Resumo A resposta hidrológica em bacias hidrográficas devido às mudanças do uso do solo pode ser avaliada por meio da construção de cenários, usando modelos hidrológicos. Nesse contexto, o objetivo desse trabalho foi analisar as consequências do desmatamento no comportamento hidrológico da bacia hidrográfica do rio Doce, que possui uma área de dr
Rev. Ambient. Água. Publicado em: 15/07/2019
-
31. Mechanical Mechanism Analysis and Influencing Factors of Subway Cross Passage Construction
Abstract The construction of the cross passage changes the main tunnels segment from a complete cylindrical structure to a notched unstable stressed structure. Thus, the overall force (bending and shearing) performance of the main tunnels is considerably decreased. The excavation of the cross passage also destroys the stability of the original soil layer and
Lat. Am. j. solids struct.. Publicado em: 01/07/2019
-
32. Numerical Investigation of Tension Reinforcement Lap Length of Eurocode 2 Using a Four-Point Beam Loading System
Abstract This report presents a computational research on Eurocode 2 (EC2) tension lap lengths (lo) design in a normally reinforced concrete beam, using ANSYS Workbench simulation software program by simulating a laboratory 4-point beam loading test system under static loading(discrete model approach). A typical 4-point laboratory setup loading system was mo
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
33. Numerical approach of the steel-concrete bond behavior using pull-out models
ABSTRACT This paper deals with the analysis of monotonic loading behavior in pull-out tests. The main objective is to obtain a reliable numerical model to represent the steel-concrete bond behavior using previously obtained experimental results. The tests were performed in RILEM pull-out specimen using 10 mm steel bar and concrete with compressive strength o
Matéria (Rio J.). Publicado em: 10/06/2019
-
34. Longitudinal Aerodynamic and Stability Characteristics of High-Aspect-Ratio Unmanned Aerial Vehicles in Gust Response
ABSTRACT The aim of this work is to propose an accurate and reliable numerical simulation method of gust response, so as to analyze longitudinal stability characteristics of high-aspect-ratio unmanned aerial vehicles (UAVs) under gust response. Based on the dual-time stepping method, the unsteady Navies-Stokes equation was solved. By introducing grid velocit
J. Aerosp. Technol. Manag.. Publicado em: 03/06/2019
-
35. Effect of surface roughness and lubrication on the friction coefficient in deep drawing processes of aluminum alloy aa1100 with fem analysis 1
ABSTRACT Friction between the interface workpiece and tooling has considerable importance in sheet metal forming operations; an accurate description of the friction is necessary to analyze and design new workpieces and tooling. This work suggests a methodology to determine and evaluate the mean coefficient of friction (COF) using the Finite Element Method (F
Matéria (Rio J.). Publicado em: 20/05/2019
-
36. An efficient mechanical-probabilistic approach for the collapse modelling of RC structures
Resumo As estruturas em concreto armado são largamente utilizadas ao redor do mundo. Entretanto, a modelagem de seu complexo comportamento mecânico por formulações numéricas eficientes tem sido marginalmente apresentada na literatura. As formulações eficientes possibilitam a precisa e realista representação dos fenômenos mecânicos envolvidos e sã
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019