Numerical Calculation
Mostrando 13-24 de 158 artigos, teses e dissertações.
-
13. Sensitivity analysis of 3D frictional contact with BEM using complex-step differentiation
Abstract This paper presents a study of the complex step differentiation method applied to a parameter sensitivity analysis for 3D elastic contact problem. The analysis is performed with the Boundary Element Method (BEM) using discontinuous elements and the Generalized Newton Method with line search (GNMls). A standard BEM implementation is used and the cont
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
14. Numerical Studies of Penetration in Light Armor, Concrete and Brick-Wall Targets
ABSTRACT The accurate numerical simulation of projectile penetration process is a complex challenge. Experimental investigation of these time-dependent non-linear events is expensive and time-consuming. In this paper, 3-D numerical simulations are carried out to estimate the penetration performance of designed penetrators against the double and triple brick-
Matéria (Rio J.). Publicado em: 18/10/2018
-
15. Dynamic crack propagation of granite subjected to biaxial confining pressure and blast loading
Abstract To great understanding the dynamic crack propagation of rock under in-situ stress and blasting, the static-dynamic loading experimental platform was built. With different confining pressure (0MPa, 2MPa, 4MPa, 6MPa, 8MPa) and different ratios (K) of horizontal-to-vertical pressure (0, 0.25, 0.5, 0.75, 1), nine texts have been carried out in quadrate
Lat. Am. j. solids struct.. Publicado em: 02/07/2018
-
16. Microstructure and Flight Behaviors of Droplet and its Solidification in Twin-Wire Arc Sprayed Ni-Al Composite Coatings
Droplet flight and solidification behaviors during twin-wire arc sprayed (TWAS) composite coatings were systematically investigated. Both theoretical model and numerical method were established for calculating the droplet deformation, breakup and solidification process in air flow based on the volume of fluid (VOF) dual-phase flow model jointed with the stan
Mat. Res.. Publicado em: 19/03/2018
-
17. A proposal for the evaluation of the bioeconomic efficiency of beef cattle production systems
ABSTRACT The objective of this study was to identify types of production system and their main indicators on bioeconomic efficiency, using qualitative and quantitative methods to evaluate beef cattle farms in the western region of the state of Rio Grande do Sul. A survey was carried out with 43 farmers operating in the western region of that state. All farms
R. Bras. Zootec.. Publicado em: 2017-01
-
18. Dynamic Response and Microstructure Evolution of Oxygen-Free High-Conductivity Copper Liner in Explosively Formed Projectile
Abstract The dynamic response and microstructure evolution of oxygen-free high-conductivity copper in a shaped charge liner are investigated through microstructural examination of a soft-recovery EFP. Adiabatic shear bands and voids which is the failure original of copper EFP can be observed in the rear part of the projectile. Numerical simulation results il
Lat. Am. j. solids struct.. Publicado em: 2017
-
19. A Classification for a Geostatistical Index of Spatial Dependence
ABSTRACT: In geostatistical studies, spatial dependence can generally be described by means of the semivariogram or, in complementary form, with a single index followed by its categorization to classify the degree of such dependence. The objective of this study was to construct a categorization for the spatial dependence index (SDI) proposed by Seidel and Ol
Rev. Bras. Ciênc. Solo. Publicado em: 15/12/2016
-
20. A New Displacement-based Approach to Calculate Stress Intensity Factors With the Boundary Element Method
Abstract The analysis of cracked brittle mechanical components considering linear elastic fracture mechanics is usually reduced to the evaluation of stress intensity factors (SIFs). The SIF calculation can be carried out experimentally, theoretically or numerically. Each methodology has its own advantages but the use of numerical methods has become very popu
Lat. Am. j. solids struct.. Publicado em: 2015-09
-
21. Fiber-matrix Contact Stress Analysis for Elastic 2D Composite Solids
AbstractThis paper presents a finite element formulation for the analysis of two dimensional reinforced elastic solids developing both small and large deformations without increasing the number of degrees of freedom. Fibers are spread inside the domain without the necessity of node coincidence. Contact stress analysis is carried out for both straight and cur
Lat. Am. j. solids struct.. Publicado em: 2015-03
-
22. AN EOS-BASED NUMERICAL SIMULATION OF THERMAL RECOVERY PROCESS USING UNSTRUCTURED MESHES
Abstract In the past thirty years, the development of compositional reservoir simulators using an equation of state (EOS) has been addressed in the literature. However, the development of compositional thermal simulators in conjunction with the EOS formulation, in particular, has not been addressed extensively. In this work, a fully implicit, thermal, compos
Braz. J. Chem. Eng.. Publicado em: 2015-03
-
23. Studying energy absorption in tapered thick walled tubes
In many engineering structures different energy absorption systems may be used to improve crashworthiness capability of the system and to control damages that may occur in a system during an accident. Therefore, extensive research has been done on the energy-absorbing cells. In this paper, energy absorption in tapered thick walled tubes has been investigated
Lat. Am. j. solids struct.. Publicado em: 2015-01
-
24. A New Coupled Free Wake-CFD Method for Calculation of Helicopter Rotor Flow-Field in Hover
ABSTRACT: This paper concerns a new coupled free wake-CFD method for proper calculation of aerodynamic loads on a two bladed helicopter rotor in hovering flight. Loading is computed by solving the three dimensional Euler equations in a rotating coordinate system. However, since direct simulation of the tip vortices and wake requires a very fine grid, the rot
J. Aerosp. Technol. Manag.. Publicado em: 2014-06