Numerical And Experimental Characterization
Mostrando 1-12 de 42 artigos, teses e dissertações.
-
1. Three-dimensional numerical simulation of flow in vertical slot fishways: validation of the model and characterization of the flow
RESUMO As escadas para peixes com ranhuras verticais permitem que ocorra a dissipação da energia do escoamento em função da forma da bacia, dos defletores, da declividade longitudinal e da largura da ranhura vertical. Estas estruturas devem apresentar padrões médios e turbulentos do escoamento compatíveis com os peixes que irão transpô-la. Tipicame
RBRH. Publicado em: 11/04/2019
-
2. Electromagnetic Characterization of Aircraft Composite Materials and its Effects on the Antenna Performance
Abstract This paper presents an electromagnetic characterization of aircraft composite materials, as well as numerical and experimental analyses of its effects on the antenna performance. Two uncalibrated S-parameters characterization methods have been applied for retrieving the complex electrical permittivity in the L- and C-band, namely: Air-region method
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-03
-
3. The use of Gauss-Hermite quadrature in the determination of the molecular weight distribution of linear polymers by rheometry
The molecular weight distribution (MWD) and its parameters are of the fundamental importance in the characterization of polymers. Therefore, the development of techniques for faster MWD determination is a relevant issue. This paper aims at implementing one of the relaxation models from double reptation theory proposed in the literature and analyzing the nume
Braz. J. Chem. Eng.. Publicado em: 2013-12
-
4. Characterization of the Al-3wt.%Si alloy in unsteady-state horizontal directional solidification
The main purpose of this paper is to investigate both the columnar to equiaxed transition and primary dendritic arm spacings of Al-3wt.%Si alloy during the horizontal directional solidification. The transient heat transfer coefficient at the metal-mold interface is calculated based on comparisons between the experimental thermal profiles in castings and the
Mat. Res.. Publicado em: 14/05/2013
-
5. A swirler stabilized combustion chamber for a micro-gas turbine fuelled with natural gas
Micro-gas turbines are a good alternative for on-site power generation, since their operation is very reliable. The possibility of operating with various fuels increases versatility and, as a result, the usage of these devices. Focusing on a performance improvement of a tri-fuel low-cost micro-gas turbine, this work presents investigations of the inner flow
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012-12
-
6. A characterization for the flow behavior of as-extruded 7075 aluminum alloy by the improved Arrhenius model with variable parameters
In order to perform the numerical simulations of forging response and establish the processing parameters for as-extruded 7075 aluminum alloy, the compressive deformation behavior of as-extruded 7075 aluminum alloy were investigated at the temperatures of 573 K, 623 K, 673 K and 723 K and the strain rates of 0.01 s-1, 0.1 s-1, 1 s-1 and 10 s-1 on a Gleeble15
Mat. Res.. Publicado em: 13/11/2012
-
7. Investigação experimental e analítica do escoamento ao redor de cilindro circular com supressores de VIV. / Experimental and analytical investigation of the flow around circular cylinder with VIV suppressors.
The fluid flow around bluff bodies is one of the main problems in fluid mechanics. The investigations of this phenomenon are based on analytical, numerical and experimental techniques. Each technique presents advantages and disadvantages, being impossible the comprehensive characterization of the flow though only one technique for the majority of body geomet
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/09/2011
-
8. Experimental measurements and numerical simulation of permittivity and permeability of Teflon in X band
Abstract Recognizing the importance of an adequate characterization of radar absorbing materials, and consequently their development, the present study aims to contribute for the establishment and validation of experimental determination and numerical simulation of electromagnetic materials complex permittivity and permeability, using a Teflon® sample. The
J. Aerosp. Technol. Manag.. Publicado em: 2011-04
-
9. Estudo de VIM - Movimentos Induzidos por Vórtices em plataformas do tipo monocoluna: abordagem numérico-experimental e impactos no sistema de amarração. / VIM study - Vortex Induced Motions in monocolumn type platforms: numeric-experimental approach and impact on mooring system.
The vortex induced vibration VIV is a main subject studied in the offshore engineering, having its name adapted to VIM by the occurrence in Spar platforms in the Gulf of México. As the first monocolumn unit, the Sevan Piranema, was in Northeast Brazil in 2007, VIM occurrence in cylindrical units like this was questioned, having the mooring lines design dime
Publicado em: 2011
-
10. Uma proposta de FSS fractal com geometria simplificada
As Superfícies Seletivas de Frequência (FSS) são estruturas periódicas em uma ou duas dimensões que atuam como filtros espaciais, podendo ser formadas por elementos do tipo patches condutores ou aberturas, funcionando como filtros rejeita-faixa ou passa-faixa, respectivamente. O interesse no estudo das FSS tem crescido através dos anos, pois tais estru
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/12/2010
-
11. Liquid rocket combustion chamber acoustic characterization
Abstract: Over the last 40 years, many solid and liquid rocket motors have experienced combustion instabilities. Among other causes, there is the interaction of acoustic modes with the combustion and/or fluid dynamic processes inside the combustion chamber. Studies have been showing that, even if less than 1% of the available energy is diverted to an acousti
J. Aerosp. Technol. Manag.. Publicado em: 2010-12
-
12. Analysis of creep and shrinkage and its utilization in health monitoring of reinforced concrete column. / Análise da deformabilidade por fluência e retração e sua utilização na monitoração de pilares de concreto.
This thesis presents the study of the time dependent deformation of concrete structures due to creep and shrinkage. Creep, shrinkage, compressive strength, splitting tensile strength and modulus of elasticity tests were performed in mixtures commonly used in construction. Experimental parameters were obtained from these mechanical characterizations and creep
Publicado em: 2010