Analysis of creep and shrinkage and its utilization in health monitoring of reinforced concrete column. / Análise da deformabilidade por fluência e retração e sua utilização na monitoração de pilares de concreto.

AUTOR(ES)

Luciana Tiemi Kataoka

DATA DE PUBLICAÇÃO

2010

RESUMO

This thesis presents the study of the time dependent deformation of concrete structures due to creep and shrinkage. Creep, shrinkage, compressive strength, splitting tensile strength and modulus of elasticity tests were performed in mixtures commonly used in construction. Experimental parameters were obtained from these mechanical characterizations and creep and shrinkage models were evaluated. Nine short reinforced and non reinforced columns were long term loaded and monitored for 91 days. The tests were performed in a temperature and relative humidity controlled ambient. The redistribution of internal stresses from concrete to reinforcement due to creep and shrinkage were investigated. In order to analyze the redistribution of internal stresses Finite Element Method simulations were performed. Creep and shrinkage models and experimental data were considered in simulations. Other formulations were also applied to examine the experimental data from columns. One of the creep models which best fit the experimental data of the column mixture characterization was adjusted and the model results were used in these formulations. Numerical results and experimental data were evaluated. In this context, the characterization of creep and shrinkage of concrete and statistical evaluation of models contribute to know the behaviour of present-day construction materials and makes possible the use of efficiency models. Besides the study of creep and shrinkage in columns enhance the knowledge of internal stresses redistribution. Finally, an updating creep model was successfully applied to concrete experimental data.

ASSUNTO(S)

pilar mechanical proprieties monitoração propriedades mecânicas retração shrinkage column concrete concreto creep fluência healthy monitoring

Documentos Relacionados

• Concreto auto-adensável: caracterização da evolução das propriedades mecânicas e estudo da sua deformabilidade por solicitação mecânica, retração e fluência.
• RETRAÇÃO, FLUÊNCIA E FRATURA EM COMPÓSITOS CIMENTÍCIOS REFORÇADOS COM POLPA DE BAMBU
• Análise dos efeitos da retração e fluência em vigas mistas
• Tensões originadas pela retração em elementos de concreto com deformação restringida considerando-se o efeito da fluência.
• Deformações por fluência em pilares de concreto armado