Numerical Analytical Method
Mostrando 13-24 de 192 artigos, teses e dissertações.
-
13. Esquema Explícito Semi-Analítico para a Solução da Equação da Onda Unidimensional com Condições de Contorno Naturais
RESUMO Este artigo aborda o desenvolvimento de um esquema explícito semi-analítico destinado à solução da equação da onda unidimensional não homogênea. Uma malha espaço-tempo foi construída através da relação incremental c Δ t = Δ x, de tal modo que volumes de controle foram formados a partir das retas características da referida equação
TEMA (São Carlos). Publicado em: 03/06/2019
-
14. Physical and geometric non-linear analysis using the finite difference method for one-dimensional consolidation problem
Abstract This article presents a numerical model based on the finite difference method for the physical and geometric non-linear analysis of a one-dimensional consolidation problem regarding a saturated, homogeneous and isotropic soil layer with low permeability and high compressibility. The problem is formulated by adopting the void ratio as the primary var
REM, Int. Eng. J.. Publicado em: 2019-06
-
15. New hybrid approach for free vibration and stability analyses of axially functionally graded Euler-Bernoulli beams with variable cross-section resting on uniform Winkler-Pasternak foundation
Abstract In this paper, a new hybrid approach is presented based on the combination of the power series expansions and the Rayleigh-Ritz method for stability and free vibration analyses of axially functionally graded non-uniform beams resting on constant Winkler-Pasternak elastic foundation. In the proposed novel technique, the power series approximation is
Lat. Am. j. solids struct.. Publicado em: 08/04/2019
-
16. Reduced-order strategy for meshless solution of plate bending problems with the generalized finite difference method
Abstract This paper presents some recent advances on the numerical solution of the classical Germain-Lagrange equation for plate bending of thin elastic plates. A meshless strategy using the Generalized Finite Difference Method (GFDM) is proposed upon substitution of the original fourth-order differential equation by a system composed of two second-order par
Lat. Am. j. solids struct.. Publicado em: 04/02/2019
-
17. Analytical determination of the critical impact location for wing leading edge under birdstrike
Abstract The wing leading edge is one of the aircraft structures which are vulnerable to birdstrike. Therefore, Federal Aviation Regulation has clear requirements of anti-birdstrike performance for wing leading edge. However, the impact location is not specified in aviation regulation. The forefront of the wing leading edge is selected as a critical location
Lat. Am. j. solids struct.. Publicado em: 04/02/2019
-
18. Buckling Analysis of Laminated Anisotropic Kirchhoff’s Plates via The Boundary Element Method
Abstract A new fundamental solution for laminated anisotropic Kirchhoff’s plates with out-of-plane and in-plane compressive loads is derived here. The multicompressed solution for both isotropic and anisotropic cases is obtained via the Radon Transform. Some fundamental kernels of the integral equations are described in detail. BEM results of displacements
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
19. Sensitivity analysis of 3D frictional contact with BEM using complex-step differentiation
Abstract This paper presents a study of the complex step differentiation method applied to a parameter sensitivity analysis for 3D elastic contact problem. The analysis is performed with the Boundary Element Method (BEM) using discontinuous elements and the Generalized Newton Method with line search (GNMls). A standard BEM implementation is used and the cont
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
20. An interface element for numerical analysis of flat plate/shell elements with deformable connection
Abstract The use of numerical methods such as the finite elements method for solving structural analysis problems is becoming ever more efficient. An interface element capable of associating flat plate/shell element in three different combinations has been developed. In a structural analysis, when only the flat plate/shell’s finite elements are used in th
Lat. Am. j. solids struct.. Publicado em: 26/04/2018
-
21. A Hybrid Approach for Assessments of Equivalent Emission Sources and Electromagnetic Environments
Abstract This paper presents a method for equivalent emission source determination by application of LLAs (Large Loop Antennas). A review of different types of LLAs is carried out and their characteristics regarding emission source evaluation are emphasized. A hybrid technic is applied for obtaining the electric fields based on previous measurement of magnet
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2018-03
-
22. Free Vibration Analysis of Functionally Graded Nanocomposite Beams on Elastic Foundation Using a Mesh-Free Method
Abstract The use of Carbon Nanotubes as the reinforcing constituent for polymer matrix composites in place of conventional fibers has led to the emergence of a new generation of advanced composite materials. In this paper, the free vibration of functionally graded nanocomposite beams on elastic foundations are studied. Three different types of Carbon Nanotub
Lat. Am. j. solids struct.. Publicado em: 2017-12
-
23. MATHEMATICAL MODEL OF CATALYTIC PROCESSES AT MODIFIED ELECTRODES
A mathematical modeling of electrocatalytic processes taking place at modified electrodes is discussed. In this paper we obtained the approximate analytical solutions for the nonlinear equations under non steady state conditions using homotopy perturbation method. Simple and approximate polynomial expressions for the concentration of reactant, product and ch
Quím. Nova. Publicado em: 2017-09
-
24. Imposition of Dirichlet Boundary Conditions in Element Free Galerkin Method through an Object-Oriented Implementation
Abstract One of the main drawbacks of Element Free Galerkin (EFG) method is its dependence on moving least square shape functions which don’t satisfy the Kronecker Delta property, so in this method it’s not possible to apply Dirichlet boundary conditions directly. The aim of the present paper is to discuss different aspects of three widely used methods o
Lat. Am. j. solids struct.. Publicado em: 2017-06