Numerical Analysis
Mostrando 25-36 de 1510 artigos, teses e dissertações.
-
25. Numerical Analysis of the Chebyshev Collocation Method for Functional Volterra Integral Equations
RESUMO O método de colocação baseado em funções de base de Chebyshev, acoplado com processo iterativo de Picard, é proposto para resolver uma equação integral funcional de Volterra do segundo tipo. Usando o Teorema do Ponto Fixo de Banach, provamos teoremas sobre a solução de existência e unicidade na norma L 2. Também fornecemos a análise de co
TEMA (São Carlos). Publicado em: 2020-12
-
26. Evaluation of stability of three different mini-implants, based on thread shape factor and numerical analysis of stress around mini-implants with different insertion angle, with relation to en-masse retraction force
RESUMO Objetivos: Avaliar a estabilidade de três diferentes tipos de mini-implantes, com base no fator formato da rosca (thread shape factor, TSF), e avaliar a tensão no local de inserção e no osso cortical ao redor dos mini-implantes inseridos com dois ângulos diferentes, durante a aplicação de força para retração. Métodos: Foram usados três d
Dental Press J. Orthod.. Publicado em: 2020-12
-
27. Error Analysis of the Numerical Method for Correcting the Propagation of EM waves in the Troposphere
Abstract Electromagnetic (EM) waves do not travel in straight lines in the troposphere due to refraction. This leads to errors in many engineering applications. In order to correct these errors, a numerical solution based on the difference method has been proposed, which can reveal the degree of EM wave bending owing to atmospheric refraction, moreover, it c
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-09
-
28. Should ethanol be considered a treatment for COVID-19?
Abstract This paper describes the analysis of the effects of a frequency selective surface (FSS) on the characteristics of a microstrip line fed antenna with a bow-tie slot in the ground plane for operation in the frequency range 1 to 10 GHz. The use of the FSS is proposed to miniaturize the antenna structure and increase the number of resonance frequencies
Rev. Assoc. Med. Bras.. Publicado em: 2020-09
-
29. Effects of an FSS Reflector on a Microstrip Line Fed Bow-Tie Slot Antenna
Abstract This paper describes the analysis of the effects of a frequency selective surface (FSS) on the characteristics of a microstrip line fed antenna with a bow-tie slot in the ground plane for operation in the frequency range 1 to 10 GHz. The use of the FSS is proposed to miniaturize the antenna structure and increase the number of resonance frequencies
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-09
-
30. Von Mises stresses on Mushroom-loop archwires for incisor retraction: a numerical study
RESUMO Objetivo: Realizar uma simulação numérica, por meio do Método dos Elementos Finitos (MEF), para obter as tensões de von Mises em arcos Mushroom. Métodos: Foram usados arcos com geometria Mushroom de titânio-molibdênio, com secção transversal 0,017” x 0,025”. Adotou-se valores de tensão de escoamento (σesc) de 1.240 MPa e módulo de
Dental Press J. Orthod.. Publicado em: 2020-08
-
31. Bearing failure in bolted sleeve connections with circular hollow sections under compression
Abstract This article analyzes sleeve connections between circular hollow sections. This type of connection is composed of two tubes connected by bolts to an inner tube with a smaller diameter, and explores the efficiency, aesthetics and resistance of hollow sections subjected to tension and compression. In previous researches, sleeve connections with aligne
REM, Int. Eng. J.. Publicado em: 2020-06
-
32. Effect of Plasma Arc Welding on Residual Stress and Distortion of Thin Titanium Sheet
In this research work, a finite element model is developed to predict the temperature field and residual stress during plasma arc welding of thin Ti-6Al-4V sheets. Dhinakaran’s heat source model which is based on Parabolic Gaussian distribution is used to predict the temperature field and Anand’s model is used to predict the residual stress. Numerical si
Mat. Res.. Publicado em: 20/01/2020
-
33. Structural reliability model considering mixed probabilistic and interval variables
Abstract Traditional probability-based structural reliability analysis method can only consider random uncertainties described by random distribution functions, which required sufficient experimental samples. On comparison, interval uncertainties can be more appropriate when lacking information. In realistic situations, several structural reliability models
Lat. Am. j. solids struct.. Publicado em: 17/01/2020
-
34. EXPERIMENTAL AND NUMERICAL ANALYSIS OF CHAOTIC ADVECTION AS AN EFFICIENT APPROACH TO MAXIMIZE HOMOGENEOUS LAMINAR MIXING IN A BATCH MIXER
Abstract In the present work, the impacts of effective parameters on the mixing of Stokes flows in a chaotic batch mixer are numerically and experimentally studied. The batch mixer consists of a container and two circular rotors where the rotors can rotate independently. To investigate the possibility of improving the mixing, the effect of non-constant speed
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
35. Large Displacement Static Analysis of Composite Elliptic Panels of Revolution having Variable Thickness and Resting on Winkler-Pasternak Elastic Foundation
Abstract Nonlinear static response of laminated composite Elliptic Panels of Revolution Structure(s) (EPRS) having variable thickness resting on Winkler-Pasternak (W-P) Elastic Foundation is investigated in this article. Generalized Differential Quadrature (GDQ) method is utilized to obtain the numerical solution of EPRS. The first-order shear deformation th
Lat. Am. j. solids struct.. Publicado em: 20/12/2019
-
36. Uma abordagem centrada no aluno para ensinar Química: estimulando a participação ativa e autônoma dos alunos
Resumo: Neste artigo, investigou-se um componente de Química em que o ensino é centrado no aluno. Assim, as aulas são organizadas por meio de períodos de estudo (PE) e grupos de discussão (GD), além da utilização de mapas conceituais e Histórias em Quadrinhos como recursos didáticos. Teve-se por objetivo verificar a percepção dos alunos (n=26) so
Ciênc. educ. (Bauru). Publicado em: 20/12/2019