Nonlinear Control
Mostrando 1-12 de 400 artigos, teses e dissertações.
-
1. Sulfonylurea resistance in Amaranthus hybridus from southern Brazil
ABSTRACT Amaranthus hybridus is a C4 broadleaf species widely spread across Brazilian agricultural territory. Recently, several herbicide resistance reports have been documented in southern Brazil, including the reports for enolpyruvilshikymate-3-phosphate (EPSPS)- and acetolactate-synthase (ALS)- inhibitors. The objective of this study was to confirm the ex
Revista Ceres. Publicado em: 2022
-
2. Dynamic anisotropy and non-linear geostatistics supporting short term modelling of structurally complex gold mineralization
Abstract Non-linear geostatistical methods are known to deal appropriately with the geological and geometrical complexity of gold deposits. This article reports the results related to an investigation to improve the gold content estimate based on restricted ore modeling to honor the structural aspects that control the mineralization. The grade domains are de
REM, Int. Eng. J.. Publicado em: 2021-06
-
3. A METHODOLOGY TO OBTAIN ANALYTICAL MODELS THAT REDUCE THE COMPUTATIONAL COMPLEXITY FACED IN REAL TIME IMPLEMENTATION OF NMPC CONTROLLERS
Abstract Model Predictive Control, MPC and NMPC, and real-time optimization, RTO and D-RTO, are known to help plant operability through the mitigation of impacts caused by external disturbances. However, the usage of these tools in industry requires overcoming some challenges, for instance: accurate models of the process, particularly in regard to nonlineari
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
4. Uma abordagem experimental e numérica para determinação de curvas de compressão para concreto simples e reforçados com fibras de aço
RESUMO A curva tensão-deformação do concreto é importante para o dimensionamento de estruturas, pois por meio dela é possível obter sua resistência à compressão, sua deformação de pico, o módulo de elasticidade e a tenacidade do concreto. Entretanto, essa é uma propriedade que não é comumente determinada nos ensaios de controle de qualidade do
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Enhancement the Fatigue Life of Floating Breakwater Mooring System Using Tuned Liquid Column Damper
Abstract Safety is a key design criterion for floating structures. A high rate of mooring accidents has been reported over the past decades. Preventing mooring line failure is a key design objective for floating breakwater systems. The mooring system comprises sets of mooring lines anchored to the seabed. These components are exposed to highly cyclic nonline
Lat. Am. j. solids struct.. Publicado em: 22/08/2019
-
6. A Regional Legacy Soil Dataset for Prediction of Sand and Clay Content with Vis-Nir-Swir, in Southern Brazil
ABSTRACT The success of soil prediction by VIS-NIR-SWIR spectroscopy has led to considerable investment in large soil spectral libraries. The aims of this study were 1) to develop a soil VIS-NIR-SWIR spectroscopy approach using legacy soil samples to improve spectral soil information in a regional scale; (2) to compare six spectral preprocessing techniques;
Rev. Bras. Ciênc. Solo. Publicado em: 15/08/2019
-
7. Preliminary investigation of Terahertz spectroscopy to predict pork freshness non-destructively
Abstract Freshness, a very important criterion for pork quality control, is normally assessed by the index of K value. In this paper, Terahertz (THz) spectroscopy was employed to predict K value of pork nondestructively. The THz spectra (0.2~2.0THz) of 80 pork samples with different freshness in the attenuated total reflectance (ATR) mode were acquired. Simu
Food Sci. Technol. Publicado em: 22/07/2019
-
8. STATE ESTIMATION AND TRAJECTORY TRACKING CONTROL FOR A NONLINEAR AND MULTIVARIABLE BIOETHANOL PRODUCTION SYSTEM
ABSTRACT In this paper a controller is proposed based on linear algebra for a fed-batch bioethanol production process. It involves finding feed rate profiles (control actions obtained as a solution of a linear equations system) in order to make the system follow predefined concentration profiles. A neural network states estimation is designed in order to kno
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
9. ESTIMATIVAS DE PARÂMETROS GENÉTICOS E DE AMBIENTE PARA MEDIDAS REPETIDAS DE PRODUÇÃO LEITEIRA EM CAPRINOS
Resumo Objetivou-se com este estudo comparar funções matemáticas no ajuste da curva de lactação média e individual de caprinos e estimar parâmetros genéticos e ambientais para medidas repetidas de produção de leite. Foram utilizadas 183 lactações, sendo 121 de cabras Saanen e 62 de cabras Alpinas, de animais pertencentes ao Laboratório de Caprin
Ciênc. anim. bras.. Publicado em: 10/06/2019
-
10. Nonlinear H∞ control scheme for a flying robot
Abstract In this paper, a nonlinear H∞ state feedback control is designed for both orientation and altitude of a flying robot system in the presence of external disturbance. An analytical solution is proposed for Hamilton-Jacobi-Isaac (HJI) equation. According to the quadrotor's orientation and altitude, a suitable storage function is considered and the ap
Lat. Am. j. solids struct.. Publicado em: 13/05/2019
-
11. Growth and Development of Ipomoea Weeds
RESUMO: A presença de plantas daninhas reduz o potencial agrícola das culturas. Plantas do gênero Ipomoea, além de competirem por água, luz, espaço e nutrientes, criam problemas na colheita de culturas devido aos seus caules volúveis. O objetivo deste trabalho foi analisar o crescimento e desenvolvimento de cinco plantas daninhas do gênero Ipomoea du
Planta daninha. Publicado em: 06/05/2019
-
12. Sistema computadorizado para deslocamento de amostra com motor de passo utilizando o L298: aplicação na técnica de varredura-Z
Resumo Neste trabalho vamos abordar uma nova tecnologia, de baixo custo, de controle de motor de passo via computador, a qual pode ser utilizada para movimentação de amostras. Mais especificamente, desenvolvemos um sistema de controle usando o módulo eletrônico comercial L298, que evita o uso de um circuito eletrônico tradicional complexo de múltiplos
Rev. Bras. Ensino Fís.. Publicado em: 18/04/2019