Niti
Mostrando 13-24 de 160 artigos, teses e dissertações.
-
13. Pulp analysis of teeth submitted to different types of forces: a histological study in rats
Abstract Objective: The purpose of this study was to histologically evaluate pulp and dentin under induced tooth movement (ITM) with different types of forces. Material and Methods: The maxillary right first molars of rats were submitted to movement with continuous (CF), continuous interrupted (CIF) and intermittent (IF) forces during 5, 7 and 9 days with
J. Appl. Oral Sci.. Publicado em: 04/10/2018
-
14. Releasing systems for aerospace industry based upon Shape Memory Alloys: characterization of materials for actuators
ABSTRACT Releasing and deployment maneuvers carried out during space satellites launching are usually performed by utilizing pyrotechnics loads. However, it is considered convenient to replace this technique by others not requiring explosives (Non Explosive Actuators-NEA). This is mainly due to the necessity of reducing high-shock and vibrations induced leve
Matéria (Rio J.). Publicado em: 19/07/2018
-
15. Impact of Alloy Composition and Thermal Stabilization on Martensitic Phase Transformation Structures in CuAlMn Shape Memory Alloys
Alloys of CuAlMn are known as cheap, high strength shape memory alloys with an excellent damping capacity within their austenitic-martensitic phase transformation, compared to alloy systems like NiTi, CuZnAl or MnCu. But CuAlMn alloys have disadvantage due to generation of voids by a high shrinkage which further increases the existing proneness to stress cra
Mat. Res.. Publicado em: 19/07/2018
-
16. Synthesis of As-sintered 60NiTi Parts with a High Open Porosity Level
60NiTi, despite exhibiting attractive chemical and mechanical properties desirable for biomedical applications, has not yet been processed to a porous structure suitable for general bone replacement applications. In this research, elemental Ni and Ti powders were used to process and manufacture 60NiTi parts by employing conventional press-and-sinter method.
Mat. Res.. Publicado em: 10/07/2018
-
17. Welding strength of NiTi wires
RESUMO Objetivo: identificar a potência mais adequada para solda elétrica em três marcas comerciais de fios de níquel-titânio (NiTi). Métodos: noventa pares de fios ortodônticos de NiTi, de dimensões 0,018” e 0,017” × 0,025’’, foram soldados por resistência elétrica e distribuídos em três grupos: GI (Orthometric, Marília, São Paulo,
Dental Press J. Orthod.. Publicado em: 2018-06
-
18. The Wire Drawing Mechanics of Near-Equiatomic NiTi SMA
The wire drawing mechanic of Ti-49.82Ni (at. %) Shape Memory Alloy (SMA) was investigated through the true stress-strain curves and drawing stresses. The tensile tested solution treated wire presented a four steps elongation at temperatures below the austenite finish temperature (AF), and a conventional one-step behavior above the martensite deformation temp
Mat. Res.. Publicado em: 26/03/2018
-
19. Comparison of deflection forces of esthetic archwires combined with ceramic brackets
Abstract Coated archwires and ceramic brackets have been developed to improve facial esthetics during orthodontic treatment. However, their mechanical behavior has been shown to be different from metallic archwires and brackets. Therefore, the aim of this study was to compare the deflection forces in coated nickel-titanium (NiTi) and esthetic archwires combi
J. Appl. Oral Sci.. Publicado em: 08/02/2018
-
20. Apically extruded debris in filling removal of curved canals using 3 NiTi systems and hand files
Resumo O objetivo deste estudo foi avaliar a extrusão apical de debris durante a desobturação com WaveOne Gold (WOG), ProTaper Universal Retratamento (PTR), D-RaCe (DRR) ou limas manuais (HF), comparar o tempo de trabalho durante a desobturação, e descrever as falhas dos instrumentos de NiTi. Quarenta canais de raízes mésio-vestibulares de primeiros m
Braz. Dent. J.. Publicado em: 2018-02
-
21. Debris extrusion and foraminal deformation produced by reciprocating instruments made of thermally treated NiTi wires
Abstract Objective To evaluate the amount of apically extruded debris, percentage of foraminal enlargement and apical foramen (AF) deformation that occurred during root canal preparation with different reciprocation systems: Reciproc, WaveOne (M-Wire), and ProDesign R (Shape Memory Technology Wire) at two different working lengths (WLs): 0.0 and 1.0 mm beyo
J. Appl. Oral Sci.. Publicado em: 18/01/2018
-
22. Surface Characterization of NiTi Superelastic and Shape Memory Alloys After Electrolytic Polishing
For the biomedical application of NiTi alloys, an excellent surface finishing process is required to guarantee high corrosion resistance and biocompatibility, eliminating the allergenic and toxic effects associated with the release of nickel ions in the body. Electropolishing is a process that can reduce surface imperfections and form a thin protective layer
Mat. Res.. Publicado em: 09/11/2017
-
23. Recovery Mechanisms in a Compressed Ni-Ti Superelastic Alloy
The present work studied the influence of annealing on a Ni-Ti alloy submitted to uniaxial compression. The stress-strain curve under compression showed the absence of the Stress-Induced-Martensite (SIM) plateau and 42% of remaining austenitic phase (B2). identified by the Electron Backscattered Diffraction (EBSD) technique on a Scanning Electronic Microscop
Mat. Res.. Publicado em: 19/10/2017
-
24. Noncontact three-dimensional evaluation of surface alterations and wear in NiTi endodontic instruments
Abstract The aim of this study was to undertake a qualitative and quantitative assessment of nanoscale alterations and wear on the surfaces of nickel-titanium (NiTi) endodontic instruments, before and after use, through a high-resolution, noncontact, three-dimensional optical profiler, and to verify the accuracy of the evaluation method. Cutting blade surfac
Braz. oral res.. Publicado em: 09/10/2017