Nial
Mostrando 1-12 de 38 artigos, teses e dissertações.
-
1. Atomization Characteristics of Droplet and Morphologies of Arc Sprayed Ni-Al Particles and Composition Coatings
Droplet atomization characteristics and its morphology in twin-wire arc sprayed (TWAS) Ni-Al were explored in depth. Both numerical model and theoretical method were built for calculating the process of the droplet deformation and breakup in air flow, which based on the standard k-ε model and the volume of fluid (VOF) dual-phase flow model. The atomization
Mat. Res.. Publicado em: 23/09/2019
-
2. Electrochemical corrosion characterization of nickel aluminides in acid rain
ABSTRACT Nickel aluminides have been extensively studied in recent decades to replace superalloys, in some components of aircraft turbines, because they have excellent corrosion resistance. Many industrial cities have the problem of air pollution, which has forced the study of the degradation of these alloys in the presence of acid rain. The aim of this work
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. Microstructure and Flight Behaviors of Droplet and its Solidification in Twin-Wire Arc Sprayed Ni-Al Composite Coatings
Droplet flight and solidification behaviors during twin-wire arc sprayed (TWAS) composite coatings were systematically investigated. Both theoretical model and numerical method were established for calculating the droplet deformation, breakup and solidification process in air flow based on the volume of fluid (VOF) dual-phase flow model jointed with the stan
Mat. Res.. Publicado em: 19/03/2018
-
4. New Alternative to Produce Colored Polymer Nanocomposites: Organophilic Ni/Al and Co/Al Layered Double Hydroxide as Fillers into Low-Density Polyethylene
Green (Ni2+/Al+3) and pink (Co2+/Al+3) layered double hydroxides (LDH) (molar ratio of 3:1) were intercalated with several organic anions and used as functional colored fillers into low density polyethylene (LDPE) by melt mixing in amounts of 0.2 to 7 wt.%. Scanning electron microscopic (SEM) results of LDPE nanocomposites indicated that with low percentage
J. Braz. Chem. Soc.. Publicado em: 2017-12
-
5. Elastoplastic Stability and Failure Analysis of FGM Plate with Temperature Dependent Material Properties under Thermomechanical Loading
Abstract The present paper explores the stability and failure response of elastoplastic Ni/Al2O3 functionally graded plate under thermomechanical load using non-linear finite element formulation based on first-order shear deformation theory and von-Karman’s nonlinear kinematics. The temperature dependent thermoelastic material properties of FGM plate are v
Lat. Am. j. solids struct.. Publicado em: 2017-08
-
6. Finite Element Modelling for Static and Free Vibration Response of Functionally Graded Beam
Abstract A 1D Finite Element model for static response and free vibration analysis of functionally graded material (FGM) beam is presented in this work. The FE model is based on efficient zig-zag theory (ZIGT) with two noded beam element having four degrees of freedom at each node. Linear interpolation is used for the axial displacement and cubic hermite int
Lat. Am. j. solids struct.. Publicado em: 2016-04
-
7. (Efeito do tratamento térmico na síntese do óxido espinélio NiAl2O4 usando quitosana como precursor)
Resumo Aluminato de níquel (NiAl2O4) foi preparado utilizando quitosana como precursor polimérico e uma solução amoniacal como um agente de precipitação. Além disso, sais de nitrato de níquel e de nitrato alumínio foram empregados como fontes de Ni e Al, em quantidades estequiométricas (razão molar Ni:Al = 1:2). Partículas de NiAl2O4 foram prepar
Cerâmica. Publicado em: 2015-12
-
8. Avaliação da Resistência à Oxidação de Camadas de Ligação de Revestimentos Utilizados em Barreiras Térmicas
Resumo Revestimentos são crescentemente utilizados como alternativa de engenharia em projetos avançados. Diversas técnicas e processos estão disponíveis para a aplicação de revestimentos, dependendo da condição específica a que se destinam. Revestimentos para barreira térmica, conhecidos como TBC, fazem parte de uma série especial de revestimento
Soldag. insp.. Publicado em: 2015-12
-
9. Cu and Ni Catalysts Supported on γ-Al2O3 and SiO2 Assessed in Glycerol Steam Reforming Reaction
Catalisadores de Cu e Ni suportados em γ-Al2O3 e SiO2 comerciais foram estudados frente a reforma a vapor de glicerol. Os catalisadores foram preparados pelo método da impregnação e caracterizados por espectrometria de emissão atômica por plasma acoplado indutivamente, fisissorção de nitr
J. Braz. Chem. Soc.. Publicado em: 2015-01
-
10. Plasma-assisted production of carbon black and carbon nanotubes from methane by thermal plasma reform
A reforma de fontes de carbono por plasma térmico de argônio de elevada capacidade calorífica é um dos métodos mais promissores na síntese de novos materiais. Um método para a obtenção de negro de carbono e nanotubos de carbono através da pirólise do metano por plasma térmico de corrente contínua é relatado no presente trabalho. A reforma foi r
J. Braz. Chem. Soc.. Publicado em: 2014-01
-
11. Desenvolvimento e caracterização de catalisadores de níquel suportados em matrizes CeO2-ZrO2-Al2O3, CeO2-La2O3-Al2O3 e ZrO2-La2O3-Al2O3 avaliados para as reações de reforma do metano / Development and characterization of nickel catalysts supported on CeO2-ZrO2-Al2O3, CeO2-La2O3-Al2O3 and ZrO2-La2O3-Al2O3 evaluated for the reactions of methane reforming
A reforma do metano é um processo de grande interesse industrial para a produção de hidrogênio e de gás de síntese. Entre as reações de reforma do metano, destacam-se as reações de reforma a vapor e a reação com dióxido de carbono. O catalisador comumente utilizado nos processos e Ni/Al2O3. Porém, durante este processo, ocorre uma indesejada fo
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 17/04/2012
-
12. Determination of mesalamine by spectrofluorometry in human serum after solid-phase extraction with Ni-Al layered double hydroxide as a nanosorbent
Hidróxido duplo lamelar de níquel-alumínio nanoestruturado foi sintetizado e o potencial do material obtido, foi avaliado como sorvente para extração em fase sólida (SPE), na separação e pré-concentração de quantidades traço de mesalazina (ácido 5-aminossalicílico) usando o método de coluna. O analito retido em Ni-Al LDH foi removido por solu�
Journal of the Brazilian Chemical Society. Publicado em: 2012-03