Multiphase Model
Mostrando 1-12 de 52 artigos, teses e dissertações.
-
1. SIMULATION AND EXPERIMENTAL INVESTIGATION OF POWER CONSUMPTION, GAS DISPERSION AND MASS TRANSFER COEFFICIENT IN A MULTI-PHASE STIRRED BIOREACTOR
Abstract Bio-oxidation leaching of refractory gold concentrate was carried out in a typical gas-liquid-solid three-phase stirred bioreactor. The bacteria, which adhered to solid particle surfaces and spread over the liquid phase, require sufficient oxygen and nutrient of carbon and nitrogen, and then the mass transfer rate should be considered. However, the
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
2. Shaping stem cell therapies in Argentina: regulation, risk management and innovation policies
Resumo Este artigo visa analisar as vias de inovação da tecnologia de células-tronco na Argentina. Primeiramente, apresentamos um panorama teórico sobre a construção concomitante da regulação e do desenvolvimento tecnológico, postulando quatro principais tensões subjacentes à construção regulatória e à formulação de estratégias nacionais pa
Sociologias. Publicado em: 2019-04
-
3. Simulación matemática para la optimización del patrón de flujo entregado por una buza para el molde de colada continua de planchón delgado
ABSTRACT Understanding the behavior of the oscillations of the jets into the mold of thin slab funnel is essential to ensure a constant supply of liquid steel, improve control of the flow patterns and consequently increase plant productivity and the final product quality. To achieve this, we conducted a study of the effect of the internal design of the nozzl
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Mathematical modeling of the shaft furnace process for producing DRI based on the multiphase theory
Abstract A numerical model based on transport equations for momentum, energy and chemical species for the gas and solid phases is proposed to simulate the inner phenomena in the direct reduction of the shaft furnace process for producing directly reduced iron (DRI). The model is verified using industrial data for productivity, raw materials and final composi
REM, Int. Eng. J.. Publicado em: 2018-03
-
5. Numerical Predictions for the Thermal History, Microstructure and Hardness Distributions at the HAZ during Welding of Low Alloy Steels
A phenomenological model to predict the multiphase diffusional decomposition of the austenite in low-alloy hypoeutectoid steels was adapted for welding conditions. The kinetics of phase transformations coupled with the heat transfer phenomena was numerically implemented using the Finite Volume Method (FVM) in a computational code. The model was applied to si
Mat. Res.. Publicado em: 05/04/2016
-
6. INFLUENCE OF INTERFACIAL FORCES ON THE MIXTURE PREDICTION OF AN ANAEROBIC SEQUENCING BATCH REACTOR (ASBR)
AbstractIn the operation of bioreactors, the fluid movement promotes mixing between sludge and substrate. The dynamics of this system are complex, and the interaction between the phases is difficult to evaluate accurately. In this work, Computational Fluid Dynamics is applied to simulate a pilot-scale anaerobic sequencing batch reactor, using a three-dimensi
Braz. J. Chem. Eng.. Publicado em: 2015-06
-
7. CFD modeling of two immiscible fluids mixing in a commercial scale static mixer
A Computational Fluid Dynamics model based on the Eulerian formulation for multiphase flow was developed to model the mixing hydrodynamics of two immiscible fluids in a commercial scale static mixer. The two immiscible liquids were condensate and caustic solutions and were considered as two phases that are interpenetrating each other. The aim of this study w
Braz. J. Chem. Eng.. Publicado em: 2014-12
-
8. Hydrodynamic Simulation of Gas - Particle Injection Into Molten Lead
A multiphase- hydrodynamic model was solved with the phase field method and the Cahn-Hilliard equation to simulate the behavior of particle injection with nitrogen as conveying gas through a submerged lance into a lead bath in two dimensions. The residence and mixing time were obtained for different operating parameters like gas flow rate, lance depth, and d
Mat. Res.. Publicado em: 01/07/2014
-
9. Metodologia para aplicar LES ao craqueamento catalítico fluido em um reator riser industrial / Large eddy simulation application methodology to a fluid catalytic cracking industry reactor
The main objective of this thesis is to propose a methodology in how to apply Large Eddy Simulation (LES) on a unit of catalytic cracking. In order to achieve this, it was proposed an alternative way of constructing the computational mesh, by using quasi-uniform meshes. The proposed meshes were implemented to minimize the computational effort and procedure f
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/09/2012
-
10. Simulação de Reações de craqueamento catalítico e térmico em riser industrial / Simulation catalytic and thermal cracking reactions at industrial riser
The dynamic behavior of a FCC (Fluidized Catalytic Cracking) industrial reactor was simulated employing 3D gas-solid ow models and applying the ten-lumps kinetic model developed by JACOB et al.(1976). The uid-dynamic and the chemical reactions predicted were validated with a set of plant data publicated in literature. Besides, there were added thermal cracki
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/01/2012
-
11. Three dimensional mathematical model of the iron ore sintering process based on multiphase theory
In the integrated steel industries the sintering process plays an important role furnishing raw material to the blast furnace. In this work, a computational simulation of the sinter process is developed that is able to predict the most important phenomena within the sintering bed. The model is based on the multi phase concept with multiple components describ
Mat. Res.. Publicado em: 04/09/2012
-
12. Evaluation of mathematical models to describe growth of grazing young bulls
The objective of this study was to evaluate the use of different mathematical models to describe growth of grazing beef cattle. Data of 20 Nellore bulls with initial weight of 129±28.1 kg and final weight of 405±62.0 kg were used. The animals were randomly divided into four plots and placed on B. decumbens Stapf pastures. Three plots received concentrate s
Revista Brasileira de Zootecnia. Publicado em: 2012-02