INFLUENCE OF INTERFACIAL FORCES ON THE MIXTURE PREDICTION OF AN ANAEROBIC SEQUENCING BATCH REACTOR (ASBR)
AUTOR(ES)
Rosa, L. M., Maurina, G. Z., Beal, L. L., Baldasso, C., Torres, A. P., Sousa, M. P.
FONTE
Braz. J. Chem. Eng.
DATA DE PUBLICAÇÃO
2015-06
RESUMO
AbstractIn the operation of bioreactors, the fluid movement promotes mixing between sludge and substrate. The dynamics of this system are complex, and the interaction between the phases is difficult to evaluate accurately. In this work, Computational Fluid Dynamics is applied to simulate a pilot-scale anaerobic sequencing batch reactor, using a three-dimensional, transient and multiphase modeling. Several correlations were applied to estimate the interfacial forces. Results indicate that the use of different coefficients for the drag and lift forces strongly affects the predicted turbulent kinetic energy, and thus the mixture estimation in the bioreactor. The use of the drag as the only interfacial force provided an average turbulent kinetic energy close to the value found using a more complete model. However, the absence of lift and virtual mass forces had a significant impact on the resulting turbulence distribution.
Documentos Relacionados
- Effect of internal recirculation velocity in an anaerobic sequencing batch reactor (ASBR)
- Microbial succession within an anaerobic sequencing batch biofilm reactor (ASBBR) treating cane vinasse at 55ºC
- Enhancement of the performance of an anaerobic sequencing batch reactor treating low-strength wastewater through implementation of a variable stirring rate program
- Methanogenesis in an Upflow Anaerobic Sludge Blanket Reactor at pH 6 on an Acetate-Propionate Mixture
- Characterization of immobilized biomass by amplified rDNA restriction analysis (ARDRA) in an anaerobic sequencing-batch biofilm reactor (ASBBR) for the treatment of industrial wastewater