Multiphase Fluid
Mostrando 1-12 de 44 artigos, teses e dissertações.
-
1. Design and analysis of different models of microfluidic devices evaluated in Enhanced Oil Recovery (EOR) assays
ABSTRACT Microfluidic devices are a new platform for Enhanced Oil Recovery (EOR) assays. The application of Colloidad Dispersion Gels (CDG) injection method has been proposed in recent years. However, the mechanism of oil recovery enhancement has not been completely elucidated. Its purpose is to mobilize oil by decreasing the permeability of channeled zones.
Matéria (Rio J.). Publicado em: 19/07/2018
-
2. Simulación matemática para la optimización del patrón de flujo entregado por una buza para el molde de colada continua de planchón delgado
ABSTRACT Understanding the behavior of the oscillations of the jets into the mold of thin slab funnel is essential to ensure a constant supply of liquid steel, improve control of the flow patterns and consequently increase plant productivity and the final product quality. To achieve this, we conducted a study of the effect of the internal design of the nozzl
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. INFLUENCE OF INTERFACIAL FORCES ON THE MIXTURE PREDICTION OF AN ANAEROBIC SEQUENCING BATCH REACTOR (ASBR)
AbstractIn the operation of bioreactors, the fluid movement promotes mixing between sludge and substrate. The dynamics of this system are complex, and the interaction between the phases is difficult to evaluate accurately. In this work, Computational Fluid Dynamics is applied to simulate a pilot-scale anaerobic sequencing batch reactor, using a three-dimensi
Braz. J. Chem. Eng.. Publicado em: 2015-06
-
4. CFD modeling of two immiscible fluids mixing in a commercial scale static mixer
A Computational Fluid Dynamics model based on the Eulerian formulation for multiphase flow was developed to model the mixing hydrodynamics of two immiscible fluids in a commercial scale static mixer. The two immiscible liquids were condensate and caustic solutions and were considered as two phases that are interpenetrating each other. The aim of this study w
Braz. J. Chem. Eng.. Publicado em: 2014-12
-
5. Simulação trifásica por técnicas de CFD da combustão de carvão mineral em leito fluidizado circulante / Three-phase CFD simulation of coal combustion in a circulating fluidized bed reactor
A queima de carvão mineral em Leito Fluidizado Circulante (CFBC) tem interessado pesquisadores por várias décadas, tendo sido propostos inúmeros modelos matemáticos que visam descrever os complexos fenômenos de transferência de massa, energia e quantidade de movimento deste sistema gás-sólido. A fase sólida é uma mistura de materiais inertes, como
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/09/2012
-
6. Metodologia para aplicar LES ao craqueamento catalítico fluido em um reator riser industrial / Large eddy simulation application methodology to a fluid catalytic cracking industry reactor
The main objective of this thesis is to propose a methodology in how to apply Large Eddy Simulation (LES) on a unit of catalytic cracking. In order to achieve this, it was proposed an alternative way of constructing the computational mesh, by using quasi-uniform meshes. The proposed meshes were implemented to minimize the computational effort and procedure f
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/09/2012
-
7. Experimentação física do escoamento gás-líquido em uma coluna de bolhas retangular utilizando a técnica PIV e a técnica de sombras SHADOW / Gas- liquid experimentation in a rectangular bubble column using PIV and Shadow techniques
Bubble columns are multiphase contact devices for mass and heat transfer, wich are intensively used in different industrial areas. Flow and turbulence in these equipments are induced by the bubble rise motion. The hydrodynamics and bubble behavior in a homogeneous bubbly flow regime was analyzed in a rectangular laboratory-scale bubble column (50 x 20 x 220
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/07/2012
-
8. Simulação de Reações de craqueamento catalítico e térmico em riser industrial / Simulation catalytic and thermal cracking reactions at industrial riser
The dynamic behavior of a FCC (Fluidized Catalytic Cracking) industrial reactor was simulated employing 3D gas-solid ow models and applying the ten-lumps kinetic model developed by JACOB et al.(1976). The uid-dynamic and the chemical reactions predicted were validated with a set of plant data publicated in literature. Besides, there were added thermal cracki
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/01/2012
-
9. Estudo computacional da dinâmica do escoamento reativo em risers industriais de FCC / Computational study of the dynamics of the reactive flow in FCC industrial risers
O craqueamento catalítico fluido (FCC) é um dos processos de maior importância da indústria do refino de petróleo, já que converte as frações pesadas de baixo valor comercial provenientes de outros processos de refino, em produtos comercialmente mais importantes, como gasolina, GLP e diesel. Atualmente, com o aumento da demanda por combustíveis fós
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/01/2012
-
10. Investigação do escoamento bifásico gás-líquido em uma coluna de bolhas retangular por meio da técnica CFD / Investigation of two-phase gas-liquid flow in a rectangular bubble column using CFD technique
This study aims to evaluate the main forces which act in gas-liquid flow in a rectangular bubble column of dimensions 150cm x 26;4cm x 3;1cm (height (H) x width (W) x depth (D)), with centralized aeration, using CFD technique. The proposed case is based in a experimental study of an air-water system operating in homogeneous bubbly flow, with initial liquid h
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 12/12/2011
-
11. Simulation of coke combustion in FCC regenerators using computational fluid dynamics / Simulação da combustão de coque em regeneradores FCC usando fluidodinâmica computacional
Craqueamento Catalítico Fluidizado (FCC) é um processo amplamente utilizado para converter frações de hidrocarbonetos de óleos brutos de petróleo com elevado ponto de ebulição, a produtos mais valiosos tais como gasolina e gases olefínicos (alcenos). Durante as reações de craqueamento, o catalisador é desativado rapidamente devido à deposição
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/08/2011
-
12. Estudo numérico e experimental de uma coluna de bolhas operando em regime heterogêneo / Numerical and experimental study of a bubble column operating in heterogeneous regime
Os principais problemas da simulação da fluidodinâmica em sistemas gás-líquido por CFD são as simplificações do comportamento dinâmico das bolhas. Na maioria dos processos industriais com escoamento gás-líquido em colunas de bolhas, as bolhas estão em velocidades altas e a coluna opera em regime heterogêneo. Existe ainda a influência da geometr
Publicado em: 2011