Monitoring Of Structures
Mostrando 13-24 de 132 artigos, teses e dissertações.
-
13. Finite element evaluation of the effects of curvature in Lamb waves for composites structural health monitoring
Abstract This work presents the effect of the high curvature to thickness ratio on the characteristics of Lamb Waves propagating over the skins of composite structures. It is accessed how the curvature on composite skins affects the group velocity of the symmetrical (S0) and asymmetrical (A0) wave modes. It is also accessed the gradient of curvature effect,
Lat. Am. j. solids struct.. Publicado em: 11/10/2018
-
14. Monitoring structures with optical fibers: infiltration detection
ABSTRACT The use of sensors and optical fibers for monitoring structures is continuously growing. Strains, displacements, accelerations, temperatures are just a few of the monitoring possibilities. In the case of dam structures, concrete face rockfill dams constitute a type of structures where the monitoring of water infiltrations is of particular interest.
An. Acad. Bras. Ciênc.. Publicado em: 2018-04
-
15. Yeast fermentation of sugarcane for ethanol production: Can it be monitored by using in situ microscopy?
ABSTRACT This paper addresses some key issues related to the automation of fermentation process analysis in the context of industrial-scale ethanol production from sugarcane substrates. As the current methods for the determination of cell density and viability are time consuming and laborious, high resolution in situ microscopy (0.5µm) is proposed as a prom
Braz. J. Chem. Eng.. Publicado em: 2017-10
-
16. CONTROL PROPOSAL FOR A HIGH PURITY COLUMN BASED ON THE SEPARATION OF VARIABLES BY THE INDEPENDENT COMPONENT ANALYSIS METHOD
Abstract Many industries are complex when it comes to operation mode. In order to reduce the problems related to strong coupling in these processes, the search for the incorporation of artificial intelligence devices has shown an increasing trend in recent years. Due to this complexity and control in multivariable processes, diagnosis and fault monitoring in
Braz. J. Chem. Eng.. Publicado em: 2017-01
-
17. Recent Developments in Damage Identification of Structures Using Data Mining
Abstract Civil structures are usually prone to damage during their service life and it leads them to loss their serviceability and safety. Thus, damage assessment can guarantee the integrity of structures. As a result, a structural damage detection approach including two main components, a set of accelerometers to record the response data and a data mining (
Lat. Am. j. solids struct.. Publicado em: 2017
-
18. TLP Structural Health Monitoring Based on Vibration Signal of Energy Harvesting System
Abstract Structural Health Monitoring (SHM) of Tension Leg Platform (TLP) is very crucial for preventing catastrophic and sudden collapse of the structures. One of the methods of monitoring these structures is implementing SHM sensors. Supplying energy for these sensors for a long period is a challenging problem. So, one of the new methods of supplying energ
Lat. Am. j. solids struct.. Publicado em: 2016-05
-
19. Electromechanical Impedance - Based Structural Health Monitoring Instrumentation System Applied to Aircraft Structures and Employing a Multiplexed Sensor Array
ABSTRACT: The electromechanical impedance method has been seen as a promising tool for structural health monitoring regarding different types of structures and purposes. Most importantly, this method can be used in real-time applications. Frequently, massive, high-cost, single-channel impedance analyzers are used to process the time domain data, aiming at ob
J. Aerosp. Technol. Manag.. Publicado em: 2015-09
-
20. Photonic Imaging with Optical Coherence Tomography for Quality Monitoring in the Poultry Industry: a Preliminary Study
ABSTRACTA photonic imaging method that gives the possibility to measure egg quality was applied. Since the method is non-contact and non-destructive we believe that this photonic imaging method may be successfully integrated in the automated inspection systems in the poultry industry. The method involves scanning an invisible infrared light beam over the egg
Rev. Bras. Cienc. Avic.. Publicado em: 2015-09
-
21. Characterization of Siloxane-poly(methyl methacrylate) Hybrid Films Obtained on a Tinplate Substrate Modified by the Addition of Organic and Inorganic Acids
Tinplate is used to food packaging and other types of packages. The corrosion resistance of the tinplate has been study due the necessity of an alternative to high environmental impact of chromatization process. Therefore protective coatings as hybrid films base elaborations with different acids are studied to improve the barrier effect against corrosion. Th
Mat. Res.. Publicado em: 2015-02
-
22. Simulation and manufacturing of a miniaturized exponential UWB TEM horn antenna for UWB radar applications
This paper presents the parameterization of the structure of a miniaturized exponential UWB TEM horn antenna and its effect on the matching impedance and directivity. In addition, a microstrip balun that feeds the antenna was proposed in order to improve the balance, and the return loss for low frequencies. Both the antenna and the microstrip balun were simu
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2013-12
-
23. Distribuição de combustíveis no estado de São Paulo : estruturas de governança e oportunismo / Distribuição de combustíveis no estado de São Paulo : estruturas de governança e oportunismo
This work is directed to the study of transactions governance adopted by fuel distributors in the State of Sao Paulo with retail market sellers or gas stations. The applied theoretical approach lies on studies of New Institutional Economics, favoring the study of Transaction Costs Economics, using attributes of transactions defined by Williansom (1979) and o
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/10/2012
-
24. Estudo da corrosão e corrosão-fadiga em ligas de Al e Al - Li de alta resistência para aplicação aeronáutica / Study behaviour of corrosion and corrosion fatigue in high strength Al and Al - Li alloys for aeronautic application
The aircraft industry is constantly looking for improved materials which offer benefits in terms of performance, weight and cost savings. Corrosion and fatigue of aluminium alloys are major issues in the service life assessment of aircraft structures and in the management of aging air fleets. The aim of this study was to evaluate the corrosion and corrosion
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/09/2012