Mixer
Mostrando 13-24 de 129 artigos, teses e dissertações.
-
13. The Effects of Spoilers on Jet Mixing of Lobed Nozzles
ABSTRACT In this study, spoilers were installed on the lobed nozzle principal model. Keeping axial position unchanged, the different widths of spoilers were mounted along the circumferential direction of a mixer tube. The effects of spoilers on the jet mixing of lobed nozzle were investigated by numerical method, and the results showed that, before or after
J. Aerosp. Technol. Manag.. Publicado em: 2016-12
-
14. Effects of polypropylene methyl polyhedral oligomeric silsesquioxanes and polypropylene-grafted maleic anhydride compatibilizers on the properties of palm kernel shell reinforced polypropylene biocomposites
Abstract The effects of the polypropylene-grafted maleic anhydride (PP-g-MAH) and polypropylene methyl polyhedral oligomeric silsesquioxane (PP-POSS) compatibilizers on the mechanical, thermal and physical properties of palm kernel shell (PKS) reinforced polypropylene (PP) were investigated. The production of PP/PKS biocomposites was performed by melt mixing
Polímeros. Publicado em: 04/08/2016
-
15. Effect of Fiber Treatment Condition and Coupling Agent on the Mechanical and Thermal Properties in Highly Filled Composites of Sugarcane Bagasse Fiber/PP
Abstract This paper reports on a study of highly filled composites of polypropylene (PP) and 75% by weight sugarcane bagasse fiber with and without alkali treatment and with and without coupling agent (SEBS-g-MA). Composites were prepared using a Rheomix600 mixer connected to a HAAKE torque rheometer. The thermal and mechanical behavior of these composites w
Mat. Res.. Publicado em: 10/05/2016
-
16. Influence of different fillers on the properties of an experimental vinyl polysiloxane
Abstract The aim of the study was to evaluate the effect of the incorporation of different fillers on an experimental vinyl polysiloxane (VPS) at two different concentrations, 20% and 40%. Different fillers were added to an experimental VPS. The study was developed in two stages: (i) incorporation of fillers in different concentrations: (a) 20 wt% fillers, a
Braz. oral res.. Publicado em: 28/03/2016
-
17. Antimicrobial action of calcium hydroxide-based endodontic sealers after setting, against E. faecalis biofilm
Abstract Enterococcus faecalis are gram positive bacteria that can mostly resist endodontic therapy, inducing persistent infection in the root canal system. Endodontic sealers with antimicrobial activity may help eliminate residual microorganisms that survive endodontic treatment. The present study aimed at comparing the antimicrobial activity of Acroseal, S
Braz. oral res.. Publicado em: 08/03/2016
-
18. The Recycling of Sugarcane Fiber/Polypropylene Composites
Mechanical recycling is utilized to reuse waste and obtain other plastic products via the reprocessing of a material in industrial equipment. Natural fiber composites have become more popular in recent years; however, these composites' mechanical behavior remains less well-understood than single polymers’ behavior after recycling. Therefore, the objective
Mat. Res.. Publicado em: 2015-08
-
19. CFD modeling of two immiscible fluids mixing in a commercial scale static mixer
A Computational Fluid Dynamics model based on the Eulerian formulation for multiphase flow was developed to model the mixing hydrodynamics of two immiscible fluids in a commercial scale static mixer. The two immiscible liquids were condensate and caustic solutions and were considered as two phases that are interpenetrating each other. The aim of this study w
Braz. J. Chem. Eng.. Publicado em: 2014-12
-
20. Sugarcane bagasse ash: new filler to natural rubber composite
Waste recycling has been the subject of numerous scientific researches regarding the environmental care. This paper reports the redirecting of sugarcane bagasse ash (SBA) as new filler to natural rubber (NR/SBA). The NR/SBA composites were prepared using an opened cylinder mixer to incorporate the vulcanization agents and different proportions of residue (SB
Polímeros. Publicado em: 2014-12
-
21. Effect of polystyrene on poly(ethylene terephthalate) crystallization
Blends of poly(ethylene terephthalate) (PET) and polystyrene (PS) with PS content ranging from 0% to 60% by weight, were compounded in a laboratory internal mixer, followed by quenching into iced water, resulting in substantially amorphous compounds. Blend morphology was analyzed by scanning electron microscopy (SEM). Standard differential scanning calorimet
Mat. Res.. Publicado em: 2014-12
-
22. Impact of particle size, thermal processing, fat inclusion, and moisture addition on starch gelatinization of broiler feeds
The present study evaluated the effect of feed particle size, thermal processing different levels of fat inclusion and of moisture addition on the amount of gelatinized starch in a corn-soybean broiler diet. The different processing factors were combined in a 2 x 4 x 4 x 2 factorial arrangement in a three randomized block design consisting of three productio
Rev. Bras. Cienc. Avic.. Publicado em: 2014-12
-
23. Comparação entre os métodos de extração de metacercárias de Ascocotyle sp (Trematoda: Digenea) dos tecidos de Mugil liza Valenciennes, 1836 (Teleostei: Mugilidae)
Nos últimos anos notou-se considerável aumento na procura e consumo de pescado, além de seus derivados. Contudo, os peixes são hospedeiros ideais de inúmeros parasitas, evidenciando a necessidade de desenvolvimento de novas metodologias de pesquisa para sua detecção. O objetivo do presente trabalho foi comparar a eficácia da extração de metacercár
Ciênc. anim. bras.. Publicado em: 2014-09
-
24. Mejoramiento de las propiedades de tensión en WPC de LDPE: HIPS/fibra natural mediante entrecruzamiento con DCP
Straight Retamo Fiber (telinemonspessulana) was mixed in a polymer matrix formed by low density polyethylene (LDPE) and high impact polystyrene (HIPS) in a 70:30 ratio. The natural fiber was subjected to size reduction between 1700 and 850 µm; surface treatment mercerization was performed; the moisture content was 0.17%. The thermo gravimetric analysis (TGA
Polímeros. Publicado em: 09/05/2014