The Effects of Spoilers on Jet Mixing of Lobed Nozzles

AUTOR(ES)

Dawei, Liu, Jun, Huang, Zhiqiang, Sheng, Jinzu, Ji

FONTE

J. Aerosp. Technol. Manag.

DATA DE PUBLICAÇÃO

2016-12

RESUMO

ABSTRACT In this study, spoilers were installed on the lobed nozzle principal model. Keeping axial position unchanged, the different widths of spoilers were mounted along the circumferential direction of a mixer tube. The effects of spoilers on the jet mixing of lobed nozzle were investigated by numerical method, and the results showed that, before or after the installation, the flow ratio did not change significantly. The value of thermal mixing efficiency and total pressure recovery coefficient had a corresponding improvement. The spoilers increased the borderline area of the primary and secondary streams, thus the mixing was accelerated. Spoilers can avoid high-temperature primary stream impinging the wall of the tube, and the temperature of mixing tube wall decreased significantly.

Documentos Relacionados

• The Effects of Scalloping Width and Position on Jet Mixing of Lobed Nozzles
• Use of jet mixing devices with an oxygen concentrator.
• Effects of Jet Fuel Spills on the Microbial Community of Soil †
• Effects of Jet-Fuel Microbial Isolates on a Polyurethane Foam
• An experimental investigation of the effects of nozzle ellipticity on the flow structure of co-flow jet diffusion flames