Mineralogical Composition
Mostrando 1-12 de 91 artigos, teses e dissertações.
-
1. MLA and optical microscopy as complementary techniques to the iron ore geometallurgical studies
Abstract Mineral liberation is an important variable to be considered in the iron ore geometallurgical studies, especially since it provides information leading to the understanding of the ore’s behaviour in the beneficiation process, mainly when harder ores are concerned. Nowadays, the professionals and researchers in the mineral industry have been using
REM - International Engineering Journal. Publicado em: 2022
-
2. Ultrafine quartz flocculation: Part I. System characterization and variables selection
Abstract A characterization study was performed to verify the more relevant physicochemical properties for quartz flocculation with polyacrylamide, as well as to define which variables should be further investigated regarding this flocculation system. Polyacrylamide was evaluated through molecular weight, radius of gyration, and infrared spectrometry. A natu
REM - International Engineering Journal. Publicado em: 2022
-
3. Microbial activity and studies on excavated megalithic micaceous potsherds from Peninsular India
Abstract The abundantly available mica flakes were added in raw materials to manufacture pottery in Central Peninsular India during the early Iron Age (700-300 BCE) for storage and glittering. The micaceous potsherds from the excavated megalithic site of Nagpur were studied for their composition, manufacturing techniques, microstructural features, microbial
Cerâmica. Publicado em: 2021-06
-
4. Characterization of sugarcane bagasse ash (SBA) and its evaluation for use in alkali-activated slag mixtures
Abstract This work proposed to incorporate the sugarcane bagasse ash (SBA) with a high content of organic matter (loss on ignition of 35.87%) in alkali-activated mixtures with blast furnace slag. After grinding SBA, replacement ratios of 10%, 20%, and 30% of the ground ash were used for the flowability evaluation. The mixtures containing 20% and 30% showed a
Cerâmica. Publicado em: 2021-03
-
5. Utilization of ferronickel slag in hot mix asphalt
Abstract The growing concern in minimizing the disorderly disposal of waste in nature has been influencing measures that seek to give new environmentally sustainable and economically viable purposes for these materials. The use of steel slag aggregate in road paving emerges as an alternative for reducing the storage of this material in industrial yards, as w
REM, Int. Eng. J.. Publicado em: 2021-01
-
6. Geological - geotechnical characterization of different lithotypes in an underground mine
Abstract A mineralogical, geological and geotechnical characterization of several rock types (phyllite, dolomite, breccia and marl) from an underground mine site aimed, among other things, to identify its mineral composition and to provide parameters to support the understanding of rock mass behavior. For this purpose, it was possible to perform laboratory a
REM, Int. Eng. J.. Publicado em: 2021-01
-
7. Using static, kinetic and metal mobility procedures to evaluate possibilities of coal waste land disposal at Moatize Mine, Mozambique
Abstract Coal mine waste rocks produced during mining and beneficiation can affect the environment due to land degradation and acid mine drainage generation. However, proper characterization and treatment of mineral processing wastes creates options for safe disposal, enhancing the environmental performance. The aim of this study was to use static and kineti
REM, Int. Eng. J.. Publicado em: 2020-12
-
8. Argamassas de cal e metacaulim: influência das condições de cura
RESUMO Nesse estudo analisou-se a influência das condições de cura de argamassas de cal aérea com dois tipos de metacaulim, utilizados como substituto parcial da massa de cal (10%). Para a análise, foram realizados ensaios de resistência mecânica à flexão e à compressão e, de composição mineralógica por difração de Raio-X (DRX), em corpos de
Matéria (Rio J.). Publicado em: 25/11/2019
-
9. Simulação de condição de fluxo em duto circular transportando polpa de bauxita de Paragominas (PA) na presença de aditivo modificador de viscosidade
RESUMO Sistemas de bombeamento de minérios por dutos tem atraído o interesse de mineradoras pois se tornam uma alternativa de transporte muito eficiente. Dentre os maiores desafios no projeto de bombeamento por dutos está a estimativa do fator de atrito, já que são muitas as variáveis que afetam este parâmetro. Uma amostra de polpa de bauxita de Parag
Matéria (Rio J.). Publicado em: 25/11/2019
-
10. Análises de dosagens de concreto asfáltico do tipo Pré Misturado a Frio (PMF) utilizando Resíduos da Construção e Demolição de obras (RCD)
RESUMO Na construção civil, um problema ambiental recorrente é a geração e disposição de Resíduos de Construção e Demolição (RCD) de obras. A utilização do RCD como agregados na composição de concreto asfáltico, do tipo Pré Misturado a Frio (PMF), torna possível a execução de pavimentos rodoviários de baixo tráfego. Diante desses fatos
Matéria (Rio J.). Publicado em: 25/11/2019
-
11. Characterization of Brazilian Northeastern plastic clays
Resumo Argilas plásticas são uma das principais matérias-primas usadas em tecnologia cerâmica. No entanto, há uma escassez dessas argilas no mundo para o uso em tecnologia de porcelanas. O objetivo deste trabalho foi caracterizar argilas plásticas do nordeste brasileiro. Composições química e mineralógica, distribuição do tamanho de partículas,
Cerâmica. Publicado em: 14/11/2019
-
12. Preparation of low-cost ceramic membranes for microfiltration using sugarcane bagasse ash as a pore-forming agent
Resumo Membranas cerâmicas são de grande interesse industrial em processos de separação. Elas são caracterizadas por elevada estabilidade química/térmica e capacidade de filtração em temperaturas acima de 500 °C em uma larga faixa de valores de pH. Entretanto, a grande desvantagem das membranas cerâmicas é o elevado custo de produção envolvendo
Cerâmica. Publicado em: 14/11/2019