Microalloying
Mostrando 1-7 de 7 artigos, teses e dissertações.
-
1. Influence of Small Content Elements Additions on the Glass Forming Ability of Zr-based Bulk Metallic Glasses Alloys
The present work reports investigation on the Glass Forming Ability (GFA) of Zr-based Bulk Metallic Glasses (BMG’s) by microalloying with early transition metals. GFA was measured as the amorphous fraction formed in samples with different diameters using optical microscopy (OM) and image analysis techniques. Samples with the highest GFA had their oxygen co
Mat. Res.. Publicado em: 06/09/2018
-
2. Evolución microestructural in-situ a alta temperatura de depósitos de soldadura de aceros 9Cr con diferentes contenidos de boro
ABSTRACT New alloys have been developed for enhancing the performance of the equipment used in thermoelectric power generation industry. With the objective of increasing the creep resistance of these materials, changes in the content of some microalloying elements were carried out. Boron bearing in creep strength enhanced 9Cr steel (CSE9Cr) welds improved ma
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. Desenvolvimento do aço microligado para rodas ferroviárias / Development of microalloyed steel for railway wheels
In this work it was developed a microalloyed steel with 0.7% carbon to manufacture railway wheels. It was taken as basis a steel class C of standard AAR M-107 and added niobium and molybdenum. The research was conducted in two stages. The first step was studied the effect of the addition of niobium and molybdenum on 0.7% C steel before and after deformation
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/07/2010
-
4. Caracterização da resistência à deformação a quente do aço baixo carbono microligado ao vanádio / Carachterization of the hot deformation resistance of a low carbon steel microalloyed with vanadium
Este trabalho, realizado em cooperação com a Gerdau Riograndense, tem por finalidade avaliar o comportamento do aço GG1013-M, um aço baixo teor de carbono microligado com vanádio e manganês, na laminação a quente no que tange a sua resistência à deformação, possibilitando assim a tomada de decisão em relação a modificações no processo. Foram
Publicado em: 2010
-
5. The effect of alloying on the resistance of carbon steel for oilfield applications to CO2 corrosion
A systematic study has been conducted to investigate the influence of a wide range of alloying elements and different processing conditions on the resistance of low-carbon steels to CO2 corrosion. Strong carbide-forming microalloying elements such as Ti, Nb and V, along with Cr additions, and different levels of Mn, Si, Cu, Mo and Ni, have been explored, alo
Materials Research. Publicado em: 2005-12
-
6. Surface processing to improve the fatigue resistance of advanced bar steels for automotive applications
With the development of new steels and processing techniques, there have been corresponding advances in the fatigue performance of automotive components. These advances have led to increased component life and smaller power transfer systems. New processing approaches to enhance the fatigue performance of steels are reviewed with an emphasis on carburizing an
Materials Research. Publicado em: 2005-12
-
7. Efeitos da adição de niobio na estrutura e propriedades dos aços com medio e alto teor de carbono
Medium and high carbon steels containing microalloying additions of niobium have, in recent years, been used for the manufacture of forged components in the automotive industry, rails and high strength concrete reinforcing bars. However, optimization of the strength and toughness properties of these materials has largely been empirical. The present work was
Publicado em: 1983