Micro Injection
Mostrando 1-12 de 215 artigos, teses e dissertações.
-
1. Design and analysis of different models of microfluidic devices evaluated in Enhanced Oil Recovery (EOR) assays
ABSTRACT Microfluidic devices are a new platform for Enhanced Oil Recovery (EOR) assays. The application of Colloidad Dispersion Gels (CDG) injection method has been proposed in recent years. However, the mechanism of oil recovery enhancement has not been completely elucidated. Its purpose is to mobilize oil by decreasing the permeability of channeled zones.
Matéria (Rio J.). Publicado em: 19/07/2018
-
2. NLRP3 inflammasome signaling as an early molecular response is negatively controlled by miR-186 in CFA-induced prosopalgia mice
The NOD-like receptor family pyrin domain containing 3 (NLRP3) inflammasome is the most frequently studied in the central nervous system and has been linked to neuropathic pain. In this study, a post-translational mechanism of microRNA (miR)-186 via regulating the expression of NLRP3 in the complete Freund's adjuvant (CFA)-treated mice was investigated. The
Braz J Med Biol Res. Publicado em: 16/07/2018
-
3. A fully validated microbiological assay for daptomycin injection and comparison to HPLC method
resumo A daptomicina (DPT) é o primeiro lipopeptídeo cíclico disponível para comercialização. Possui atividade frente a bactérias gram-positivas, incluindo cepas resistentes. O objetivo deste trabalho foi desenvolver e validar um ensaio microbiológico turbidimétrico para quantificar a daptomicina na forma injetável. Empregou-se delineamento 3x3, na
Braz. J. Pharm. Sci.. Publicado em: 2015-12
-
4. The Influence of Twist Drill Main Cutting Edge Preparation in Drilling Process
In order to improve the performance of a twist drill, one must understand some aspects involved in drilling process that are not commonly addressed, such as the micro geometry employed in the tool’s tip sharpening and the protection of the main cutting edge. The edge of the twist drill can be protected by rounding, chamfering or the combination of both. Th
Mat. Res.. Publicado em: 17/11/2015
-
5. Minimally traumatic alveolar ridge augmentation with a tunnel injectable thermo-sensitive alginate scaffold
Injectable bone substitutes and techniques have been developed for use in minimally invasive procedures for bone augmentation. Objective : To develop a novel injectable thermo-sensitive alginate hydrogel (TSAH) as a scaffold to induce bone regeneration, using a minimally invasive tunnelling technique. Material and Methods : An injectable TSAH was prepared fr
J. Appl. Oral Sci.. Publicado em: 2015-04
-
6. Micro and nanometric wear evaluation of metal discs used on determination of biodiesel fuel lubricity
The contact of diesel fuel with engine subsystems demands a good wear resistance. Lubricity is an important feature for integrity of injection system and the sulphur composites are primarily responsible for lubrication of the injector nozzle. Biodiesel is responsible for partially restoring the lubricity of diesel fuel that presents low levels of sulphur com
Mat. Res.. Publicado em: 04/07/2014
-
7. Microdissection Testicular Sperm Extraction (micro-TESE) as a Sperm Acquisition Method for Men with Nonobstructive Azoospermia Seeking Fertility: Operative and Laboratory Aspects
Introduction Rare foci of sperm production may be found in up to 60% of men with nonobstructive azoospermia (NOA). Sperm production, if present, is minimal for sperm appearance in the ejaculate. Given that there are no treatment options to restore fertility, sperm retrieval is the only alternative to find testicular sperm than then can be used for in vitro
Int. braz j urol.. Publicado em: 2013-06
-
8. Exogenous normal lymph alleviates microcirculation disturbances and abnormal hemorheological properties in rats with disseminated intravascular coagulation
Disturbances of the microcirculation and abnormal hemorheological properties are important factors that play an important role in disseminated intravascular coagulation (DIC) and result in organ dysfunction or failure. In the present study, we established an animal model of DIC using intravenous Dextran 500 in rats, and used exogenous normal lymph correspond
Braz J Med Biol Res. Publicado em: 01/02/2013
-
9. Cryopreservation of testicular and epididymal sperm: techniques and clinical outcomes of assisted conception
The introduction of the technique of intracytoplasmic sperm injection to achieve fertilization, especially using surgically retrieved testicular or epididymal sperm from men with obstructive or non-obstructive azoospermia, has revolutionized the field of assisted reproduction. The techniques for the retrieval of spermatozoa vary from relatively simple percut
Clinics. Publicado em: 2013
-
10. Projeto e desenvolvimento de um sensor MAP de pressão e temperatura em LTCC para aplicações automotivas. / Design and development of a MAP pressure and temperature sensor for automotive applications.
Este trabalho apresenta um módulo sensor de pressão absoluta do duto de admissão (MAP) para aplicações automotivas desenvolvido em substrato cerâmico LTCC. Em um veículo com sistema de injeção eletrônica de combustível, o sensor MAP informa a unidade de controle do motor sobre a pressão no duto de admissão permitindo o cálculo da vazão de ar e
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/06/2011
-
11. Sperm retrieval techniques for assisted reproduction
Different surgical methods such as PESA, MESA, TESA, TESE and micro-TESE have been developed to retrieve spermatozoa from either the epididymis or the testis according to the type of azoospermia, i.e., obstructive or non-obstructive. Laboratory techniques are used to remove contaminants, cellular debris, and red blood cells following collection of the epidid
International braz j urol. Publicado em: 2011-10
-
12. Moldagem por injeção de microcomponentes ópticos poliméricos gerados em insertos usinados por torneamento de ultraprecisão / Injection molding of polymer micro-optical components generated in inserts by ultra-precision turning
Este trabalho analisou o processo de moldagem por injeção de micro elementos ópticos difrativos usinados em insertos de cobre eletrolítico com ferramenta de diamante com ponta única. Quatro tipos de microestruturas características foram selecionados neste estudo, a saber: lente anesférica, lente de Fresnel, grade de difração (blaze grating) e sensor
Publicado em: 2010