Metallurgy
Mostrando 1-12 de 159 artigos, teses e dissertações.
-
1. Obtainment of a new metal matrix composite from the recycling of UNS S31803 duplex stainless steel by powder metallurgy
Abstract The purpose of circular economy is to maximize resources efficiency. With the increase in consumption of raw materials, energy and waste generation, recycling is necessary for environmental and industrial reasons. Thus, the powder metallurgy, together with mechanical milling, stands as a new method for scraps recycling. This study aimed to produce U
REM - International Engineering Journal. Publicado em: 2022
-
2. A Sustainable Methodology to Extract Bismuth from Secondary Sources
Bismuth is a critical metal broadly used in cosmetic, medicine and metallurgy. However, its scarcity in Earth’s crust may impair further applications. An alternative is to recover bismuth from secondary sources. In this work, a methodology to extract bismuth from safety valves of discharged gas cylinders is proposed. Extraction and purification of bismuth
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
3. Obtaining Composites Powders of Al2 O3 / Ni and Al2 O3 / Nb by Mechanical Alloying
Mechanical alloying (MA) can be highlighted among the various methods and powder processing forms, which consists of producing homogeneous materials from elementary powders. This process is of paramount importance as it has the ability to reduce the particle size of the powders and can often promote bonding between elements which have low interaction and wet
Mat. Res.. Publicado em: 14/10/2019
-
4. Characterization of Ti-35Nb alloy surface modified by controlled chemical oxidation for surgical implant applications
ABSTRACT Titanium-Niobium alloys have been studied for biomedical applications due to their satisfactory biocompatibility. In order to improve the long-term implantation, surface modification techniques have been developed to generate suitable topography, roughness, chemical composition, surface energy, etc. Considering this approach, the present work aimed
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Comparison of Aluminum Based Alloys Reinforced with Intermetallic Developed by Powder Metallurgy and Arc Melting Routes
Abstract In this work, Al-Ti alloys were prepared using metallic powders of Al and Ti via Powder Metallurgy (PM) and Arc Melting (AM) route. Four chemical compositions including pure aluminum were studied. Metallic powders were mixed with three compositions, Al-5Ti, Al-10Ti and Al-10Ti-2SiC. All the compositions were in atomic percentage. In case of PM, samp
Soldag. insp.. Publicado em: 29/08/2019
-
6. LASER INDUCED-BREAKDOWN SPECTROSCOPY (LIBS): HISTÓRICO, FUNDAMENTOS, APLICAÇÕES E POTENCIALIDADES
This review attempts to present a broad view of the technique laser-induced breakdown spectroscopy (LIBS), since its origin, fundamentals, sample preparation strategies, use of chemometric tools for data processing, the advantages and limitations with regard to qualitative and quantitative analysis, aplications and future trends as an analytical technique th
Quím. Nova. Publicado em: 18/07/2019
-
7. Notificações de violência relacionadas ao trabalho e vigilância em saúde do trabalhador: rompendo a invisibilidade
Resumo Introdução: a Política Nacional de Saúde do Trabalhador e da Trabalhadora prevê o replanejamento de ações em saúde do trabalhador a partir do reconhecimento das violências relacionadas ao trabalho. Objetivos: descrever o processo de notificação de violências relacionadas ao trabalho como ferramenta para investigação e intervenção e
Rev. bras. saúde ocup.. Publicado em: 18/07/2019
-
8. Analysis of the densification of a composite obtained by sintering process of aluminum bronze powders with different carbides
Abstract Aluminum bronze alloy is applied in environments that require materials of high mechanical resistance and wear, such as marine, oil & gas and aerospace ones. This study analyzes the densification of composites based on aluminum bronze with additions of the vanadium (VC) and niobium (NbC) carbides, and the influence of these carbides in the milling e
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
9. Semi-solid Sintering of Ti6Al4V/CoCrMo Composites for Biomedical Applications
A composite of Ti6Al4V reinforced with CoCrMo particles is fabricated by conventional powder metallurgy and semi-solid sintering. Composites are fabricated by mixing 20% wt. of CoCrMo reinforcing particles into the Ti6Al4V matrix. Sintering is studied by dilatometry tests between 1050 and 1130 °C and compact characterization is performed by SEM and XRD. Mic
Mat. Res.. Publicado em: 31/01/2019
-
10. Development of a microwave absorbing material based on molybdenum-doped niobium pentoxide
Abstract This work aimed to perform the characterization of electrical properties of niobium pentoxide, Nb2O5, pure and doped with molybdenum, prepared by powder metallurgy route and to do a comparative analysis of the influence of this material when sintered in a muffle or in a microwave oven. The results showed that the doping of the niobium pentoxide with
Cerâmica. Publicado em: 2019-01
-
11. Study on Effect of EAFD Particulate Reinforcement in AA7075 Aluminum Matrix Composites
Eletric arc furnace dust is dangerous solid waste that is generated in steel manufacturing processes. The utilization of the dust from these industries avoids disposing it into industrial waste landfills and saves costs. In this study, an attempt has been made to fabricate aluminum matrix composites reinforced with EAFD particulate, throught the conventional
Mat. Res.. Publicado em: 13/09/2018
-
12. XVI International Congress of Metallurgy and Materials SAM-CONAMET 2016 and Symposium Materials and Technologies for the Metalmechanic and Aerospace Industry
Matéria (Rio J.). Publicado em: 19/07/2018