Metallic Substrate
Mostrando 25-36 de 63 artigos, teses e dissertações.
-
25. A dual tuned Complementary Structure Frequency Selective surface for WLAN applications
A single substrate layer double metallic plane frequency selective surface (FSS) is designed with miniaturized electrical elements and two tunable pass-bands enabling Wireless Local Area Network applications. Each FSS periodic cell consists of a metallic square loop on the top metal layer and its complementary etched on the bottom metal layer separated by a
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2012-06
-
26. Produção de recobrimentos metálicos a partir de ligas de ferro amorfizáveis / Production of metallic coatings based on amorphous iron alloys
The aim of this work was to study the production of metal coatings from amorphous alloy Fe-25Cr-7Ni-4,5B (wt.%), with special focus on mechanical and microstructure properties. Initially, preliminary studies were made through the production of ribbons and bulks of metallic alloys Fe-25Cr-7Ni-XB (X = 3.5, 4.5, 5.5 wt.%) for the evaluation of amorphous phase f
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/10/2011
-
27. Propriedades optoeletrônicas de interfaces híbridas metal/semicondutor orgânico preparadas por deposição assistida por feixe de íons (IBAD) / Optoelectronic properties of interfaces hybrid metal / organic semiconductor prepared by ion beam assisted deposition (IBAD)
In this work, optoelectronic properties from organic light emitting devices (OLEDs), based on conjugated polymers with metallic cathode, which were deposited by ion beam assisted deposition technique (IBAD) were studied. The main objective of this work is to produce a hybrid non abrupt metal/polymer interface and to study its effects on electron injection. T
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/07/2011
-
28. Tratamento superficial do aço inoxidável ferrítico com revestimento La0,6Sr0,4CoO3 para aplicação como interconectores em células a combustíveis do tipo ITSOFC
High-temperature solid oxide fuel cells (800-1000°C) are energy power generation, directly converting the chemical energy into electricity by combining fuel and oxygen. With the reduction of SOFC operating temperature into an intermediate temperature range of 600-800 °C, it has become possible to replace conventional ceramics with metallic alloys for inter
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2011
-
29. Revestimentos a base de Ta/Al2O3 produzidos por aspersão térmica sobre substrato metálico / Ta/Al2O3 coatings produced by thermal spray on metallic substrate
Substratos metálicos de aço inox 416 foram revestidos por aspersão térmica em tocha de plasma. Eles foram posicionados a uma distância de 4 e 5 cm em relação ao bocal de saída do jato de plasma. Os materiais de partida utilizados para as deposições foram pós de óxido de tântalo e alumínio. Esses dois pós foram misturados e moídos em moinho de
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 17/09/2010
-
30. Evaluation of activated vegetal charcoal and vegetal polymer on the detoxification of the sugarcane hemicellulosic hydrolysate for biotechnological production of xylitol / Avaliação do carvão vegetal ativado e polímero vegetal na destoxificação do hidrolisado hemicelulósico de bagaço de cana-de-açúcar para a produção biotecnológica de xilitol
The increasing search for ethanol fuel in order to reduce the dependence and to promote the substitution of fossil fuels will contribute to higher accumulation of sugarcane bagasse in the environment. This biomass that in Brazil is a by-product of the sugar-alcohol mills, although it has been used for the generation of energy in the sugar and alcohol product
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/04/2010
-
31. Caracterização termo-mecânica de interconectores metálicos recobertos com filmes de LaCrO3
As pilhas unitárias de uma pilha a combustível de óxido sólido são separadas por meio de interconectores, que servem como contato elétrico entre as pilhas. A cromita de lantânio (LaCrO3) tem sido o material mais utilizado como interconector nas pilhas a combustível de óxido sólido. A redução da temperatura de operação em torno de 800 C das pilh
Publicado em: 2010
-
32. Estudo da interação elétron-fônon em nanotubos de carbono por Espectroscopia Raman Ressonante
In this work, we have used resonance Raman spectroscopy to the study of carbon nanotubes. We reviewed the literature concerning their structural, electronic and vibrational properties, emphasizing the role of many-body effects, particularly the electron-phonon interaction, on the latter two properties. We also reviewed how Raman spectroscopy can be applied t
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/09/2009
-
33. Corrosão anisotropica e formação de superficie nanoestruturada de Si utilizando plasma de alta densidade / Si anisotropic etching and nanostructured surface formation using high density plasma
This work explores the implementation, characterization and applications of BOSCH type process for bulk silicon etching (or bulk silicon micromachining) using inductively coupled high density plasma (ICP). This etching process is characterized by its high anisotropy and is performed by alternating etching steps, employing SF6 + Ar gas mixture, and passivatio
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/07/2009
-
34. Influence of high frequency and moderate energy pulses on DLC deposition onto metallic substrates by magnetron sputtering technique
The deposition of Diamond-like carbon (DLC) films brings excellent mechanical, chemical, optical and electronic properties to a large range of materials. However, a problem to be overcome is its poor adhesion on metallic substrates. Usually, a silicon layer must be deposited on the surface of metals previous to DLC film deposition. In fact, in our experiment
Brazilian Journal of Physics. Publicado em: 2009-06
-
35. Processos litográficos em filmes epitaxiais de compostos IV-VI para medidas Hall e o estudo da dopagem do telureto de chumbo com flureto de bário / Lithographic processes in epitaxial films of IV-VI compounds for Hall measurements and the study of lead telluride doping with barium flouride
The first part of the work dealt with the application of lithographical techniques to fabricate Hall geometry of IV-VI films grown on (111) BaF_2 substrates. A previous study of In diffusion in PbTe films confirmed the viability of using In as a metallic contact. During the lithographic process, some solutions were implemented to resolve the problems generat
Publicado em: 2009
-
36. Production, purification and partial characterization of invertase obtained from solid state cultivation of Aspergillus casiellus on soybean substrate / ProduÃÃo, purificaÃÃo e caracterizaÃÃo parcial da invertase obtida por fermentaÃÃo em estado sÃlido de soja com Aspergillus casiellus
The invertase, enzyme found in yeast, above all in the Sacharomyces cerevisiae species, invertebrate, vertebrate, green alga, bacteries, vegetal and fungus, is one of the principal accountable for sucrose hydrolysis to form the inverted syrup, is used by the food industry and pharmacy, in the hydrolyses of rafinose, inulin and gentianose. In the present work
Publicado em: 2009