Metal Industries
Mostrando 1-12 de 78 artigos, teses e dissertações.
-
1. MECANISMO DE EVOLUÇÃO DE HIDROGÊNIO DURANTE A CORROSÃO DA LIGA 2198-T8 EM MEIO CONTENDO CLORETO: UMA ABORDAGEM ELETROQUÍMICA
Corrosion is still one of the most serious and frequent problems in industries. The phenomena involved in the corrosion mechanism of Al-alloys may be explained by formation of galvanic cells between the metal matrix and heterogeneities, such as precipitates, intermetallic phases leading to potential differences and electrochemical reactions. In the cathodic
Quím. Nova. Publicado em: 2020-09
-
2. Spatial and Temporal Effects of Decommissioning a Zinc Smelter on the Sediment Quality of an Estuary System: Sepetiba Bay, Rio de Janeiro, Brazil
Sepetiba Bay, Rio de Janeiro, Brazil, was home to a zinc smelter until its shutdown in 1998, and during 2011 the remains of the smelter were decommissioned. This study investigates the impact of decommissioning on metal concentrations in the bottom sediments of the bay. In addition to Zn and Cd, Cr, Cu, Ni and Pb are also quantified. The results show that ov
J. Braz. Chem. Soc.. Publicado em: 2020-04
-
3. Analysis of Residual Stress by the Hole-Drilling Method and Hardness in Dissimilar Joints of Austenitic Stainless Steel AISI 316L and Inconel 718 Alloy by Autogenous GTAW Process
Stainless steel and nickel alloy have high corrosion resistance in high-temperature environments due to the high Cr content present in their chemical composition, being widely used in components of nuclear reactors, petrochemical industries, etc. Through proper processes and procedures, it becomes possible to join these alloys. However, this union can genera
Mat. Res.. Publicado em: 02/12/2019
-
4. Bioaccumulation, Growth and Photosynthetic Response of a New Found in Bulgaria Invasive Species Lemna minuta and L. valdiviana to Heavy Metal Pollution
RESUMO: Metais pesados podem ser encontrados no meio ambiente como ingredientes naturais ou de práticas agrícolas, industriais e químicas. Este estudo foi conduzido com o objetivo de traçar o potencial das plantas aquáticas L. minuta e L. valdiviana para a bioacumulação de Cu, Cd e Pb a partir de água contaminada com baixos níveis desses elementos.
Planta daninha. Publicado em: 04/11/2019
-
5. Selection of materials for blast furnace injection using quality indicators
Abstract The injection of pulverized materials is a technique used in most of the blast furnaces in the world to reduce coke and charcoal consumption. In addition, injection is one of the main variables of the blast furnace heat control. Coal is the most used material for the injection, but some industries have been attempting to use other materials, usually
REM, Int. Eng. J.. Publicado em: 2019-03
-
6. Integrated Experimental Approach for Alloying of Surface Layer Ti6Al4V+B4C Metal Matrix Composites using Laser Treatment
Surface engineering applications have brought the titanium and its alloys into the limelight in the manufacturing industries such as the aerospace, automobile, marine, chemical processing industry, nuclear power and biomedical. Despite the growths experienced in the use of this material, it is plagued with poor wear behaviour, especially when in contact with
Mat. Res.. Publicado em: 17/01/2019
-
7. A Novel Raw Starch Hydrolyzing Thermostable α-Amylase Produced by Newly Isolated Bacillus mojavensis SO-10: Purification, Characterization and Usage in Starch Industries
ABSTRACT The aim of this study is the production, purification, and characterisation of thermostable raw starch hydrolyzing α-amylase produced by Bacillus mojavensis SO-10. The maximum production conditions of α-amylase were found at 36th hour, 35 °C and pH 7.0. We utilized three steps to purify the thermostable α-amylase and as a result, 34-fold and 18%
Braz. arch. biol. technol.. Publicado em: 08/10/2018
-
8. Study on Effect of EAFD Particulate Reinforcement in AA7075 Aluminum Matrix Composites
Eletric arc furnace dust is dangerous solid waste that is generated in steel manufacturing processes. The utilization of the dust from these industries avoids disposing it into industrial waste landfills and saves costs. In this study, an attempt has been made to fabricate aluminum matrix composites reinforced with EAFD particulate, throught the conventional
Mat. Res.. Publicado em: 13/09/2018
-
9. Caracterización del comportamiento frente a la corrosión en soldaduras de recargue de aceros inoxidables superdúplex
ABSTRACT Superduplex stainless steels have a dual structure constituted approximately by 50% of ferrite and 50 % of austenite. This fact produces a good combination of mechanical properties and corrosion resistance. Thanks to these features their use is growing, mainly in the industries of paper, chemical, gas and oil. Surfacing welding is used for the manuf
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Replacement of fluorspar in the desulfurization of hot metal
Abstract In the steel industry, lime is used as a desulfurizing agent and fluorspar as flux in the hot metal desulfurization process. However there are environmental concerns regarding the use of fluorspar, even when its harmful effects are not fully known. In order to reduce such risks and also to anticipate possible future restrictions, which could undermi
REM, Int. Eng. J.. Publicado em: 2018-04
-
11. Influencia del Aporte Térmico Sobre la Microestructura en Recargues Duros Multicomponentes (Cr, Mo, W, Nb, C, B) Nanoestructurados Base Hierro
Abstract: Surfacing welding is an issue that was increasing in relevance in last years, related with a raising number of applications in several industries. Hardfacings of nanostructured multicomponent steel of recent creation, have a set of outstanding properties. Nevertheless, the information available related with its processing is still scarce. The aim o
Soldag. insp.. Publicado em: 09/10/2017
-
12. Efecto de la Composición Química del Metal de Aporte y del Calor Aportado Sobre la Microestructura y las Propiedades Mecánicas de Juntas Soldadas de Aceros Inoxidables Dúplex
Abstract Duplex stainless steels are characterized by good weldability and mechanical properties; they also present a high resistance to general and localized corrosion. They are the main materials when welding pipes with high requirements in different industries, mainly oil and gas. These steels have a microstructure consisting of two phases: 50% austenite
Soldag. insp.. Publicado em: 2017-06