Metal Bonding
Mostrando 1-12 de 90 artigos, teses e dissertações.
-
1. Influence of hydrofluoric acid etching time and concentration on shear bond strength of metal brackets to ceramic surfaces
Resumo Introdução O tratamento de superfície prévio a colagem de braquetes a cerâmica com ácido fluorídrico, é indicado devido a sua capacidade de promover alterações morfológicas necessárias para a adesão. Objetivo Avaliar a resistência de união ao cisalhamento (RUC) de braquetes metálicos unidos à superfície cerâmica feldspática sob a
Rev. odontol. UNESP. Publicado em: 13/12/2019
-
2. Characteristics of adhesive bonding with enamel deproteinization
RESUMO Objetivo: avaliar os efeitos do uso de hipoclorito de sódio (NaOCl) sobre as características de colagem de braquetes ortodônticos metálicos na superfície do esmalte, utilizando três sistemas adesivos. Métodos: cento e vinte pré-molares foram selecionados e divididos aleatoriamente em dois grupos iguais, cada um com 60 dentes (Grupos I e II).
Dental Press J. Orthod.. Publicado em: 11/11/2019
-
3. Chemosensor Development of Cu2+ Recognition Using 1,5-Diphenylthiocarbazone: Optimization, COSMO-RS and DFT Studies
The sensitive and selective chemosensor for copper(II) ions (Cu2+) was successfully optimized using the 1,5-diphenylthiocarbazone (DPT) compound. The result showed that dimethyl sulfoxide (DMSO) in a 9:1 (DMSO:water) ratio at a pH of 3 was the optimum medium for DPT to act as chemosensor of Cu2+ recognition. The DPT chemosensor did not encounter any interfer
J. Braz. Chem. Soc.. Publicado em: 16/09/2019
-
4. The role of bondline thickness on mechanical properties of bio-based polyurethane
ABSTRACT Bio-based adhesives have been largely applied on several applications in many industrial areas, including automotive and laminated food packaging. Polyurethanes (PU) occupy a leading position among the most used bio-based polymers due to their large range of properties and application versatility. Recent works reported that PU obtained from castor o
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Study of the metallurgical bond between 316 steel substrates and NiCrAlY coating sprayed by HVOF and irradiated with a low power CO2 laser
RESUMO Considerando a importância do desenvolvimento de novos materiais ao longo dos últimos anos; os pesquisadores vêm estudando soluções eficazes através do uso de revestimentos de alta dureza para aplicação em ferramentas de corte e matrizes de conformação. Revestimentos de carboneto de tungstênio (WC) são um dos mais utilizados em sistemas de
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Estudo dos Parâmetros de União por Difusão do Aço Inoxidável AISI 316L
Resumo A união por difusão é uma técnica de união no estado sólido capaz de ligar dois materiais metálicos por meio da difusão atômica na interface de contato, sem o uso de metal de adição. Este processo é adequado para a união de grandes áreas com uma alta resistência mecânica, permitindo ao equipamento operar com elevadas pressões de traba
Soldag. insp.. Publicado em: 16/05/2019
-
7. Microstructure and Wear Resistance of ZrC-ZrB2 /Ni Composite Coatings Prepared by Plasma Transferred Arc Cladding
The ZrC-ZrB2/Ni metal matrix composite coatings were in-situ synthesized from a mixture of Ni, Zr and B4C by plasma transferred arc (PTA) cladding process. Microstructures and phase constituents of the coatings were characterized by electron probe micro-analyzer (EPMA) and X-ray diffraction (XRD). Microhardness and wear resistance of the coatings were system
Mat. Res.. Publicado em: 06/05/2019
-
8. Análisis de la forma de onda de señales de Emisión Acústica producida en ensayos de interfaces ceramo-metálicas
ABSTRACT The study of ceramic-metal interface is of special importance in odontology area by the current demand about dental prostheses, so it is very important to be more and more similar to natural teeth and with a long service life. With the aim of assessing in detail the behavior of ceramic-metal interface used in dental restorations systems, in this wor
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Obtención y caracterización de recubrimientos de biovidrio sobre la aleación de Mg AZ31
ABSTRACT The ideal material for a metal bone prosthesis must undergo a gradual corrosion in vivo, without releasing toxic components, while acting as a support and facilitating the growth of bone tissue, until a replacement is completed by the regenerated bone. . Biodegradable magnesium alloys have been studied because of their excellent mechanical propertie
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Effect of different bonding protocols on degree of monomer conversion and bond strength between orthodontic brackets and enamel
Abstract The objective of the present study was to evaluate the effect of different surface treatments and polymerization protocols on the bond strength of brackets to enamel, and the degree of conversion of the bonding agents. 120 bovine crowns were embedded in acrylic resin blocks and sanded. Next, the blocks were randomly assigned into 12 groups. Metal br
Braz. oral res.. Publicado em: 11/06/2018
-
11. AVANÇOS RECENTES NA HIDROAMINAÇÃO DE COMPOSTOS INSATURADOS
This review presents thermodynamics and kinetics aspects of the hydroamination reaction, recent advancements on this field for non-activated alkenes, alkynes and allenes, employing transition metal catalysis or organocatalysis, including activation by hydrogen bonding or Brønsted acids. Selected syntheses that contain a strategic hydroamination step will be
Quím. Nova. Publicado em: 2017-09
-
12. Cold metal transfer welding of AA1050 aluminum thin sheets
ABSTRACT This study was aimed to investigate the welding parameters on mechanical behavior of 2 mm thick AA1050 sheet materials joined by cold metal transfer (CMT) method. Macro structural examination showed that decreasing heat input decreased the pore size in the weld metal. Tensile test was applied and failure occurred in heat affected zone of aluminum sh
Matéria (Rio J.). Publicado em: 2016-09