Mesoporous Materials
Mostrando 1-12 de 50 artigos, teses e dissertações.
-
1. PREPARATION OF HYBRID POLYMERS AND USE AS CONTROLLED RELEASE DELIVERY VEHICLE FOR VOLATILE REPELLENT TO CONTROL Aedes aegypti
The Zika virus is a flavivirus spread by the Aedes aegypti mosquito, which also transmits dengue and chikungunya. Current forms of control include elimination of mosquito breeding sites, use of insecticides, repellents and other means. The present study developed new adsorbent materials based on silica and biomaterials capable of releasing an Aedes aegypti m
Quím. Nova. Publicado em: 2021-04
-
2. Synthesis and characterization of mesoporous materials with SBA and MCM structure types
Resumo Materiais mesoporosos são estruturas promissoras para aplicação em catálise e adsorção devido à elevada área superficial e grande tamanho dos poros. Materiais mesoporosos foram sintetizados pelo método hidrotérmico com novos surfactantes, distintos daqueles observados na literatura, a fim de realizar um estudo de sua estrutura e obter materi
Cerâmica. Publicado em: 14/11/2019
-
3. Development of Silica-Based Monoliths for the Capture of CO2
The synthesis of mesoporous materials in macroscopic scale, as for example, the monoliths, has been of great interest in view of the wide range of applications that this material holds. Thus, this work consists of the production of silica monoliths for the purpose of they being used in the carbon dioxide (CO2) adsorption process. The adsorbents were prepared
Mat. Res.. Publicado em: 30/09/2019
-
4. Study of ZnAl2O4 spinel nanoparticles synthesized using gelatin as organic precursor
Resumo Neste trabalho, pós do espinélio aluminato de zinco foram preparados por um método Pechini modificado, rápido, simples, ambientamento seguro e de baixo custo, utilizando gelatina comercial como precursor orgânico. Os materiais foram calcinados a 600, 700 e 800 °C e caracterizados por análise termogravimétrica, difratometria de raios X (DRX) in
Cerâmica. Publicado em: 06/06/2019
-
5. Incorporating Aluminum Into the Structure of SBA-15 by Adjusting the pH and Adding NaF
The Al incorporation on SBA-15 type material and the effects of pH adjusting and presence of NaF were studied. The direct synthesis method was performed for comparison. The following parameters were evaluated: the Si/Al ratio, pH increase, and amount of NaF added. These parameters have a great influence on the synthesis of the mesoporous Al/SBA-15 type, but
Mat. Res.. Publicado em: 18/04/2019
-
6. Importance of the Order of Addition of the Alumina Precursor and its Type Into Al-SBA-15 Mesoporous Materials for Use as Water Adsorbents
In the present report, Al-SBA mesoporous materials were investigated for use as water adsorbents. Different precursors for aluminum were investigated: aluminum sulfate and nitrate, boehmite, and aluminum tri-sec-butoxide. Furthermore, three different procedures for addition of the silica and alumina sources were tested. Samples were characterized by nitrogen
Mat. Res.. Publicado em: 10/12/2018
-
7. Síntesis de sílice mesoestructurada: determinación de las condiciones óptimas de extracción del templato
ABSTRACT Ordered mesoporous silica was synthesized by the sol-gel process using tetraethoxysilane (TEOS) as silica source and hexadecyltrimethyl ammonium bromide (CTAB) as structure directing agent. Post-synthesis surfactant removal was conducted by two techniques: calcination, with progressive increases in temperature up to 550 ºC and solvent extraction us
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Generación de mesoporosidad en zeolitas ZSM-11, BETA e Y por tratamiento alcalino
ABSTRACT Zeolites, Y, ZSM-11 and BETA, widely used in refineries and petrochemical processes, fine chemistry and environmental processes were subjected to an alkaline treatment of desilication, in order to generate mesoporosity in the structure. The process used consisted of treating samples with an aqueous solution of NaOH at 65 ° C for 30 minutes. An exch
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. SBA-15 as a Support for Nickel-Based Catalysts for Polymerization Reactions
Two mesoporous SBA-15 materials with different morphologies (spherical and fiber-shaped) were synthesized and evaluated as supports for nickel-based catalysts for polymerization reactions. The supports were pretreated with trimethylaluminum (TMA), and the catalyst dibromo-bis(4-amino-2,3,5,6-tetramethylimino)acenaphthene nickel(II) was attached to the suppor
J. Braz. Chem. Soc.. Publicado em: 2018-02
-
10. Influence of Aluminum Addition in the Framework of MCM-41 Mesoporous Molecular Sieve Synthesized by Non-Hydrothermal Method in an Alkali-Free System
Purely siliceous MCM-41 and Al-containing MCM-41 (Al-MCM-41) mesoporous materials were synthesized by non-hydrothermal method in alkali-free ions medium at room temperature and short reaction times. Under these synthesis conditions, it was also investigated the influence of Al incorporation in the crystal structure of MCM-41. The solids were characterized by
Mat. Res.. Publicado em: 17/08/2017
-
11. Facile Synthesis Strategy to Create Mesoporous Magnetic Iron Oxides Using Pectin-Based Precursors
Magnetic iron oxides are of great scientific and technological relevance. Therefore, herein, we report the research on developing methodologies for their sustainable and reproducible preparation. We discuss the synthesis of iron oxides involving citrus pectin as a source of energy (42 MJ kg-1) to promote the formation of the magnetic phases. The method invol
J. Braz. Chem. Soc.. Publicado em: 2017-07
-
12. Ordered Silica Particles Made by Nonionic Surfactant for VOCs Sorption
Adsorption of light organic compounds such acetone, 1-propanol and carbon dioxide was tested by using mesoporous silica materials made from non ionic surfactant with long chain and silica sources as tetraethylorthosilicate TEOS and modified Na-X and Li-A Zeolites. X-ray powder diffraction (XRD), nitrogen adsorption-desorption analysis and scanning electron m
Mat. Res.. Publicado em: 26/06/2017