Mechanical Vibrations
Mostrando 1-12 de 55 artigos, teses e dissertações.
-
1. Fuzzy Boundary for Beams Vibrations in Vehicles
ABSTRACT This work aims to study the transversal motion of a car’s chassis, modeled by a beam and supported at its ends by two sets of spring-damper elements. A finite differences method is utilized along with Robin boundary conditions to solve the mathematical modeling. The constants of the boundary conditions are modeled by a fuzzy parameter obtained thr
Trends in Computational and Applied Mathematics. Publicado em: 2022
-
2. Cation Vacancies in NiFe2O4 During Heat Treatments at High Temperatures: Structural, Morphological and Magnetic Characterization
Nickel ferrite (NiFe2O4) was synthesized by mixing stoichiometric amounts of α-Fe2O3 and NiO using mechanical milling and heat treatments at high temperatures. The physical characterization of the samples was carried out using X-ray diffraction, infrared and Raman spectroscopies, Mössbauer spectrometry, magnetization measurements, scanning electron microsc
Mat. Res.. Publicado em: 20/12/2019
-
3. Intermittent vibrations accelerate fracture healing in sheep
Abstract Purpose: To investigate the effect of intermittent vibration at different intervals on bone fracture healing and optimize the vibration interval. Methods: Ninety sheep were randomized to receive no treatment (the control group), incision only (the sham control group), internal fixation with or without metatarsal fracture (the internal fixation gro
Acta Cir. Bras.. Publicado em: 12/09/2019
-
4. ON AN INTEGRATED DYNAMIC CHARACTERIZATION OF VISCOELASTIC MATERIALS BY FRACTIONAL DERIVATIVE AND GHM MODELS
Abstract The passive vibration control of mechanical systems under unwanted vibrations can be accomplished in a very effective way by using devices incorporating viscoelastic materials. The design of such devices requires a broad knowledge of the dynamic properties of the employed viscoelastic material, usually supplied by adequate mathematical models. Among
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
5. Vibration analysis of laminated functionally graded shallow shells with clamped cutout of the complex form by the Ritz method and the R-functions theory
Abstract The R-functions theory and Ritz approach are applied for analysis of free vibrations of laminated functionally graded shallow shells with different types of curvatures and complex planforms. Shallow shells are considered as sandwich shells of different types: a) face sheets of the shallow shells are made of a functionally graded material (FGM) and t
Lat. Am. j. solids struct.. Publicado em: 18/02/2019
-
6. Releasing systems for aerospace industry based upon Shape Memory Alloys: characterization of materials for actuators
ABSTRACT Releasing and deployment maneuvers carried out during space satellites launching are usually performed by utilizing pyrotechnics loads. However, it is considered convenient to replace this technique by others not requiring explosives (Non Explosive Actuators-NEA). This is mainly due to the necessity of reducing high-shock and vibrations induced leve
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Experimental Evaluation of Low-Pass Shock Isolation Performance of Elastomers Using Frequency-Based Kolsky Bar Analyses
Abstract Elastomeric materials are used as shock isolation materials in a variety of environments to dampen vibrations and/or absorb energy from external impact for minimizing energy transfer between two objects or bodies. Some applications require the shock isolation materials to behave as a low-pass mechanical filter to mitigate the shock/impact at high fr
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
8. APPLICATION OF OPTICAL METHOD IN MEASURING MECHANICAL VIBRATIONS IN A CANTILEVER BEAM
ABSTRACT The pertinent literature discloses a family of optical profile measuring techniques highlighting the moiré methods. The Moiré technique is based on the interference of two superimposed optical grids which produce fringe patterns which can be processed to analyze the DYNAMIC MEASUREMENT IN MATERIALS mechanical behavior. The goal of this research is
Eng. Agríc.. Publicado em: 2017-02
-
9. Design and Damping Analysis of a New Eddy Current Damper for Aerospace Applications
Abstract In order to reduce the structural vibrations of a mechanical system used in aerospace, a new sketch of eddy current damper (ECD), consisting of one cylindrical permanent magnet, two ring-shape copper plates, one axial transmission shaft and electromagnetic shield, is proposed. Three dimensional (3D) electromagnetic transient analysis on damping perf
Lat. Am. j. solids struct.. Publicado em: 2016-11
-
10. Analytical Couple-stress Solution for Size-dependent Large-amplitude Vibrations of FG Tapered-nanobeams
Abstract In this paper, analytical couple-stress solution for size-dependent large-amplitude vibrations of FG (functionally-graded) tapered-nanobeams is presented. Using the modified couple-stress theory, the small scale effects are accounted for. Employing the Homotopy-Pade Analysis Method, efficient and accurate analytical expressions for the deflection an
Lat. Am. j. solids struct.. Publicado em: 2016-01
-
11. Chaotic synchronization of vibrations of a coupled mechanical system consisting of a plate and beams
In this paper mathematical model of a mechanical system consisting of a plate and either one or two beams is derived. Obtained PDEs are reduced to ODEs, and then studied mainly using the fast Fourier and wavelet transforms. A few examples of the chaotic synchronizations are illustrated and discussed.
Lat. Am. j. solids struct.. Publicado em: 2013-01
-
12. Verificação do desempenho da técnica "Hardware-in-the-Loop" aplicada a sistemas mecânicos não-lineares / Verification of the hardware-in-the-loop technique applied to non-linear mechanical systems
Este trabalho tem como objetivo a aplicação da técnica conhecida como Hardware-in-the-Loop (HIL), para a avaliação do comportamento dinâmico de dois sistemas mecânicos não-lineares e assim verificar o desempenho da técnica nestes casos. O primeiro estudo consiste na avaliação de um componente, no caso uma engrenagem bi-partida, sujeito a contatos
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/06/2012