Mechanical Processing
Mostrando 1-12 de 365 artigos, teses e dissertações.
-
1. Equipment for Monitoring Synchronous Generators Condition through External Magnetic Field Waveforms
Abstract This paper presents an equipment for monitoring synchronous generators condition through characteristics of the time derivative of the external magnetic field. The developed monitoring methodology allows the identification of established or incipient faults, by detecting changes in the magnetic signature of the synchronous generator. In this methodo
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Nanofibras eletrofiadas e suas aplicações: avanços na última década
In recent years there has been an increasing interest in the development of nanomaterials with improved properties compared to their counterparts at the micro- and macroscopic scale. In this context, nanofibers obtained by electrospinning technique are highly attractive due to the unique combination of high surface area/volume ratio, porosity, flexibility, m
Quím. Nova. Publicado em: 2021-06
-
3. Quality of tomatoes under different transportation conditions by principal component analysis
ABSTRACT Bulk transportation of tomatoes is a step with high occurrence of mechanical impacts, leading to increased losses and reduction in the quality of fruits arriving at the industry and reaching the consumer market. The present study aimed to evaluate variations in physical-chemical parameters associated with the quality of tomato fruits, occurred durin
Rev. Ceres. Publicado em: 2020-12
-
4. Maximization of the use of casting sand residue in the production of fired ceramic bricks
Abstract In this study, a red ceramic was developed with the addition of sand residue from deburring and finishing processing of cast iron molds, replacing a variable fraction of the clay. The formulated masses were shaped by pressing and firing at different temperatures (850, 900 and 1000 ºC) at a heating rate of 180 ºC/h and 2-hour level. The bodies were
REM, Int. Eng. J.. Publicado em: 2020-09
-
5. Discrimination of pores and cracks in iron ore pellets using deep learning neural networks
Abstract The discrimination between pores and cracks is an important step in the microstructural analysis of iron ore pellets. While the porosity is fundamental during the reduction process in blast furnaces, cracks are strongly detrimental to the mechanical strength. The usual image processing tools cannot automatically discriminate between these two types
REM, Int. Eng. J.. Publicado em: 2020-06
-
6. INFLUENCE OF DIFFERENT TEMPERATURES AND AIRFLOWS ON DRYING OF NATURAL AND PULPED COFFEE
ABSTRACT This study aimed to evaluate drying kinetics for natural and pulped coffee, using different temperatures and drying airflows. For the conduction of the experiment, coffee fruits (Coffea arabica L. cv. Topázio) were harvested manually, selecting only ripe fruits and subsequent to the hydraulic separation. For drying the coffee, use a mechanical drye
Eng. Agríc.. Publicado em: 2020-04
-
7. REUSE OF COLLAGEN AND HYDROXYAPATITE FROM THE WASTE PROCESSING OF FISH TO PRODUCE POLYETHYLENE COMPOSITES
In recent years, the increase in the generation of waste (e.g., bones and skin) from the processing of fish-based food related to the increase in fish consumption and the accumulation of synthetic polymers in the environment are causing major environmental concerns. Hydroxyapatite (HA) extracted from the bones and collagen from the skin of fish processing re
Quím. Nova. Publicado em: 2020-02
-
8. Polyurethane/poly (Ionic Liquids) Cellulosic Composites and their Evaluation for Separation of CO2 from Natural Gas
The development of both versatile and inexpensive sorbents for CO2/CH4 separation has become one of the greatest challenges to the environment and natural gas processing. This study reports the preparation and characterization of polyurethane (PU)/ cellulose based poly(ionic liquid)(CPIL) composites for CO2/CH4 separation. PU matrix was reinforced with CPIL
Mat. Res.. Publicado em: 20/01/2020
-
9. Programa de secagem para a madeira de seringueira (Hevea brasiliensis Muell. Arg.)
Resumo A seringueira (Hevea brasiliensis Muell. Arg.) tem sido cultivada para extração de látex e utilizada para produção de madeira ao fim do ciclo produtivo do látex. A secagem é uma etapa fundamental no processamento mecânico da madeira. No caso da madeira de seringueira, faz-se particularmente necessária a secagem artificial em estufa para a sua
Ciênc. Florest.. Publicado em: 02/12/2019
-
10. Preparation of Syntactic Foams made from Green Polyethylene and Glass Microspheres: Morphological and Mechanical Characterization
Polymeric syntactic foams are composites made from the mixture of Hollow Glass Microspheres (HGM) and polymer matrices. One of their main characteristics is their low density and the production of these composites using a matrix derived from renewable sources potentiates their development without neglecting sustainability. In this paper , the properties of H
Mat. Res.. Publicado em: 11/11/2019
-
11. Enrichment of Copper, Lead, and Tin by Mechanical Dry Processing of Obsolete Printed Circuit Board Residues
Waste printed circuit boards (WPCB) residues were mechanically processed to concentrate their metal content aiming to reduce costs of the subsequent recovery of copper, tin, and lead. A fully dry route was proposed to avoid the generation of liquid effluents that would require additional treatment. Firstly, 10.7% of the residue was segregated by magnetic sep
Mat. Res.. Publicado em: 24/10/2019
-
12. Obtaining Composites Powders of Al2 O3 / Ni and Al2 O3 / Nb by Mechanical Alloying
Mechanical alloying (MA) can be highlighted among the various methods and powder processing forms, which consists of producing homogeneous materials from elementary powders. This process is of paramount importance as it has the ability to reduce the particle size of the powders and can often promote bonding between elements which have low interaction and wet
Mat. Res.. Publicado em: 14/10/2019