Matrix Viscosity
Mostrando 13-24 de 94 artigos, teses e dissertações.
-
13. Processing and Properties of PCL/Cotton Linter Compounds
Biodegradable compounds of poly(ε-caprolactone) (PCL)/ cotton linter were melting mixed with filling content ranging from 1% to 5% w/w. Cotton linter is an important byproduct of textile industry; in this work it was used in raw state and after acid hydrolysis. According to the results of torque rheometry no decaying of viscosity took place during compoundi
Mat. Res.. Publicado em: 19/01/2017
-
14. Rheological properties and curing features of natural rubber compositions filled with fluoromica ME 100
Abstract This work aims at studying not only the rheological behavior of natural rubber-based compositions by making use of different contents of fluoromica or ME 100 synthetic mica in a natural rubber (NR) matrix, but also the different filler-filler and matrix-filler interactions before and after curing. The ME 100 content in NR varied from 0 to 10 phr (pa
Polímeros. Publicado em: 04/08/2016
-
15. High shear dispersion of tracers in polyolefins for improving their detection
Abstract An efficient recycling of end-of-life products is of crucial interest from an economical and ecological point of view. However, the near infrared spectroscopy often used for the optic sorting processes is limited because of the absorption of carbon black present in black plastics and as it only sorts as a function of chemical formulas. The tracing t
Polímeros. Publicado em: 2015-10
-
16. Hot Consolidation of Partially Amorphous Cu-Ti Based Alloy: a Comparison Between Hot Extrusion and Hot Compaction by Sintering
Consolidation of amorphous powders, which take advantage of the supercooled liquid region, is an alternative way to overcome the size limitation in marginal metallic glasses. Cu36Ti34Zr22Ni8based amorphous powders were obtained during high energy ball-milling. The analyses revealed that amorphous structures of powders and ribbons are quite different and this
Mat. Res.. Publicado em: 2015-06
-
17. Use of Lead (II) Sulfide Nanoparticles as Stabilizer for PMMA Exposed to Gamma Irradiation
Lead (II) sulfide (PbS) were synthesized by sonochemical method and crystals with cubic structure exhibit aggregated nanoparticles with size in the range of 50-100 nm. Commercial Poly(methyl methacrylate) (PMMA) containing the PbS nanoparticles (PbS-NP) exposed to gamma irradiation were investigated and both the viscosity-average molar mass (Mv) and degradat
Mat. Res.. Publicado em: 2015-04
-
18. Fractional heat conduction with finite wave speed in a thermo-visco-elastic spherical shell
This problem deals with the thermo-elastic interaction due to step input of temperature on the stress free boundaries of a homogeneous visco-elastic orthotropic spherical shell in the context of a new consideration of heat conduction with fractional order generalized thermoelasticity. Using the Laplace transformation, the fundamental equations have been expr
Lat. Am. j. solids struct.. Publicado em: 2014-12
-
19. Solid state polymerization of pet/pc extruded blend: effect of reaction temperature on thermal, morphological and viscosity properties
A systematic study of solid state polymerization (SSP), concerning the melt extruded blend of poly(ethylene terephthalate)/polycarbonate (catalyzed PET/PC, 80/20 wt %), as a function of temperature range (180-190°C) for a fixed time (6 h) is presented. The materials obtained were evaluated by differential scanning calorimetry (DSC), thermogravimetry/derivat
Polímeros. Publicado em: 2014-08
-
20. Thermal, rheological and morphological properties of poly (Lactic Acid) (PLA) and talc composites
In this study, composites based on poly(lactic acid) (PLA)/talc were prepared at different compositions by melt mixing in a twin screw extruder. The effect of a nucleating agent, talc, on the crystallization behavior, rheological and morphological properties of PLA was investigated. DSC results showed that the addition of the mineral filler in the range betw
Polímeros. Publicado em: 27/05/2014
-
21. Morphological, viscoelastic and mechanical characterization of polypropylene/exfoliated graphite nanocomposites
The viscoelastic, mechanical and morphological properties of polypropylene/exfoliated graphite nanocomposites with different contents of nanofiller were investigated. According to transmission electron microscopy results, the nanofiller particles were homogeneously dispersed in the matrix. The rheological properties indicated that incorporation of graphite i
Polímeros. Publicado em: 26/07/2013
-
22. Characterization of pre-gelatinized rice and bean flour
The objective of this study was to develop a pre-gelatinized flour using a mixture of broken rice and split beans by thermoplastic extrusion, and to evaluate the physicochemical, nutritional, and technological quality of the final product. The extrusion parameters were maintained using three heating zones with temperatures of 30 ºC, 40 ºC, and 70 ºC; scre
Food Sci. Technol. Publicado em: 24/05/2013
-
23. Evaluation of the effect of the incorporation of rubber tire waste particles on the properties of PP, HIPS and PP/HIPS matrices
In recent years, the consumption of plastics has been increasing and as consequence, the waste generated has also increased. Rubber tire (RT) waste is another residue which causes significant problems to society. In view of the considerable amounts of RT waste generated, this study aimed to evaluate the influence of the incorporation of RT particles into pos
Polímeros. Publicado em: 16/04/2013
-
24. ESTUDO EXPERIMENTAL DA COMBUSTÃO DO GLP E GLICEROL RESIDUAL DERIVADO DA PRODUÇÃO DE BIODIESEL EM MEIOS POROSOS RADIANTE / EXPERIMENTAL STUDY OF LPG COMBUSTION OF GLYCEROL AND RESIDUAL DERIVED FROM BIODIESEL PRODUCTION IN RADIANT POROUS MEDIA
The increasing production of biodiesel has caused increased production of residue glycerol. The large amount of glycerin (our glycerol) in the market causes a surplus unusable commercially and industrially, which should give a correct destination. At this point, the porous combustion is characterized by burning within an inert medium, to the pollutants reduc
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/05/2012