Materials Testing
Mostrando 25-36 de 386 artigos, teses e dissertações.
-
25. Effects of Gas Nitriding on Fatigue and Crack Initiation of Ti6Al4V produced by Selective Laser Melting
Selective laser melting (SLM) is an additive manufacturing technique which permits fabrication of three dimensional parts by selectively melting consecutive layers of metallic powder. This allows the production of parts with high geometrical complexity. Titanium alloy Ti-6Al-4V (Ti64) is widely used in industry due to its high strength-to-mass ratio, corrosi
Mat. Res.. Publicado em: 15/07/2019
-
26. Validation of the Brazilian version of the Pediatric Obstructive Sleep Apnea Screening Tool questionnaire,
Resumo Objetivo: Validar o questionário Pediatric Obstructive Sleep Apnea Screening Tool para o seu uso no Brasil. Materiais e métodos: A versão brasileira desse questionário, originalmente validado e testado nos Estados Unidos, foi desenvolvida a partir das seguintes etapas: a) tradução; b) retrotradução; c) conclusão da versão final; d) pré-te
J. Pediatr. (Rio J.). Publicado em: 11/04/2019
-
27. Evaluation of reinforced concrete structural durability in the post-occupation phase - A case study in Novo Hamburgo/RS
Abstract Researches on building performance have been developed over time. The Brazilian Performance Standard - NBR 15575 - deals with the issues of durability applied to residential buildings, establishing criteria and parameters to classify the systems into minimum, intermediate and higher performance levels. In relation to the service life, studies are al
REM, Int. Eng. J.. Publicado em: 2019-03
-
28. New material perspective for endocrown restorations: effects on mechanical performance and fracture behavior
Abstract The aim of this study was to investigate the mechanical performance and the fracture behavior of endocrown restorations prepared using distinct restorative materials. A total of 42 sound molars with similar crown size and shape were cut at 2 mm above the cementoenamel junction and endodontically treated. They were categorized according to the restor
Braz. oral res.. Publicado em: 11/02/2019
-
29. Shrinkage stress and elastic modulus assessment of bulk-fill composites
Abstract Bulk-fill composites were introduced in dentistry to accelerate clinical procedures while providing adequate outcomes. Concerns regarding the use of bigger composite increments rely on the polymerization shrinkage and shrinkage stress, which may generate gaps on the adhesive interface and result in a reduced success rate. Objective: To evaluate the
J. Appl. Oral Sci.. Publicado em: 07/01/2019
-
30. Composites based on low-density polyethylene combined with PETcoated SBS paperboard shavings
ABSTRACT In this study, polymer composites comprised of shavings of SBS paperboard coated with polyethylene terephthalate (PET) and recycled low-density polyethylene (LDPE) were obtained. The tensile properties, flexural strength, impact resistance and water absorption were determined according to the standards published by the American Society for Testing a
Matéria (Rio J.). Publicado em: 06/12/2018
-
31. Mechanical properties and morphological characteristics of ARALL reinforced with TRGO doped epoxy resin
ABSTRACT Mechanical properties in tension, bending, fatigue and lap-shear in two different proportions (0.5%wt and 1%wt) of TRGO (Thermally Reduced Graphite Oxide) doped ARALL (Aramid Aluminium Laminate) were examined. The materials and their failure modes were characterized morphologically by examination through SEM (Scanning Electron Microscopy). Some mech
Matéria (Rio J.). Publicado em: 06/12/2018
-
32. Mechanical properties and morphological characteristics of ARALL reinforced with TRGO doped epoxy resin
ABSTRACT Mechanical properties in tension, bending, fatigue and lap-shear in two different proportions (0.5%wt and 1%wt) of TRGO (Thermally Reduced Graphite Oxide) doped ARALL (Aramid Aluminium Laminate) were examined. The materials and their failure modes were characterized morphologically by examination through SEM (Scanning Electron Microscopy). Some mech
Matéria (Rio J.). Publicado em: 06/12/2018
-
33. Efeito da adição de fibras híbridas na durabilidade de compósitos cimentícios avançados em ambientes úmidos e agressivos
ABSTRACT Reactive powder concrete (RPC) is one type of advanced cementitious composite that has been increasingly used. Its high mechanical strength enables the application of the composite in bolder structures. Considering its recent history of use, there is a lack of knowledge about this materials durability. Therefore, this paper aimed to evaluate the beh
Matéria (Rio J.). Publicado em: 18/10/2018
-
34. Estimación de propiedades mecánicas de chapa de acero inoxidable 304L mediante ensayos SPT
ABSTRACT The mechanical characterization of materials by small specimen testing has growing interest in Structural Engineering. Small Punch Test (SPT) is applied to estimate mechanical properties of samples that can be extracted from components or structures without affecting service operation. In this paper the development of the test device is reported, co
Matéria (Rio J.). Publicado em: 19/07/2018
-
35. Mejora en la calidad de imágenes ultrasónicas aplicando métodos de composición espacial y empleando sistemas de Phased Array
ABSTRACT The Phased Array Ultrasonic Technique (PAUT) has become a widely used imaging tool for the Nondestructive Testing in the industrial field. The PAUT allows making deflections and focusing the ultrasound beam at different depths within the material, through an electronic control of each one of the N elements that make up the array transducer. Thus, se
Matéria (Rio J.). Publicado em: 19/07/2018
-
36. Experimental and numerical investigation on the dumbbell-shaped specimen of concrete-like materials under tension
Abstract Mortar is an important component of concrete. It is of great significance to obtain its tensile properties accurately. The structure heterogeneity of mortar specimens is high. Specimens are prone to fracture nearby interfaces between specimens and loading plates because of the inhomogenous stress distribution during the testing, which leads that ef
Lat. Am. j. solids struct.. Publicado em: 02/07/2018